Favorites
Design Vault Ep. 2 Vanderbilt University with Steve Knight
ABOUT THE ARCHITECT:
|
Steve Knight, AIA is a Principal with David M. Schwarz Architects, Inc. he studied at North Carolina State University where he received his Master of Architecture, that same year he joined David M. Schwarz Architects. Steve primarily focuses on his firm’s performing arts venue projects. He served as Project Architect for the design of Schermerhorn Symphony Center, The Palladium at the Center for the Performing Arts, the Gaillard Center, and most recently an 8,000-seat amphitheater in Huntsville, Alabama. He is currently leading the office’s team on the design of a neighborhood center for Chevy Chase Lake in Maryland and the multi-phase Residential College project at Vanderbilt University. Steve is active in preservation advocacy, serving as President of the Art Deco Society of Washington and on the board of the International Coalition of Art Deco Societies. |
---|
Vanderbilt University
Nicholas S. Zeppos College, Bronson Ingram Building
See MoreTRANSCRIPT
00;00;05;27 - 00;00;29;07
SN
It's a very faithful rendition of what's known as Collegiate Gothic. It is very much in step with this long-established tradition of higher education that goes back to the church in Europe and then institutions like Oxford and Cambridge. And then it comes over to the states with institutions like Harvard and Yale, who are doing very much the same thing. They were trying to identify with this established tradition.
00;00;29;14 - 00;02;24;07
DP
This is my guest, Steve Knight. I'll share more about him shortly. In this episode from the Design Vault we’ll highlight Steve's project, the Nicholas S. Zeppos College Building at Vanderbilt University.
The Nicholas S. Zeppos College Building is several thousand square feet, five stories with a large tower at one end. The building is red brick and limestone, designed in the collegiate Gothic style. The building has a slate roof, slate dormers, large brick chimney masses, limestone window frames and quoins, multi-story window bays, gable forms across the facade, and limestone gothic arches, a tall square picturesque tower with chamfered corners, polychromatic brickwork and limestone cap rounds out the building at one end.
Hi, I'm Doug Pat and this is Design Vault. Today we're talking to Steve Knight, who led the team designing the Nicholas S. Zeppos College at Vanderbilt University in Nashville, Tennessee. Steve is a member of the American Institute of Architects and he's a principal with David M. Schwarz Architects. He studied at North Carolina State University, where he received his Master of Architecture. That same year, he joined David M. Schwarz Architects. Steve primarily focuses on his firm's performing arts venue projects. He served as project architect for the design of the Schermerhorn Symphony Center, the Palladium at the Center for Performing Arts, the Gilliard center, and most recently, an 8000-seat amphitheater in Huntsville, Alabama.
Among other projects, he's currently leading the offices team on the design of the multiphase residential college project at Vanderbilt University. The Nicholas S. Zeppos College Building is one of four residential buildings for DMS at Vanderbilt University. So let's get into the details. Welcome, Steve.
00;02;24;14 - 00;02;25;28
SN
Greetings, Doug. Good to be here.
00;02;26;08 - 00;02;30;09
DP
So, tell us a little bit about your firm, David M. Schwarz Architects.
00;02;30;20 - 00;03;04;27
SN
Sure. We're a mid-sized design architect and planning firm. We're based in Washington, D.C. We have about 35 design architects on staff. We were started in the mid-seventies by our founder, David M. Schwarz.
It was a really interesting time to start an architecture firm in Washington and in the U.S., really. And there are two pivotal things that happened in the late seventies. The first was the district passed one of the most stringent historic preservation ordinances in the country. And on the heels of that, the federal government enacted tax credits for historic preservation.
00;03;04;27 - 00;03;06;22
DP
Really? How fortuitous.
00;03;07;00 - 00;03;43;12
SN
So, we found ourselves, the firm at the time - this is before my time there, obviously - but we found ourselves working in newly established historic districts on landmark designated buildings, and it really informed how we think about architecture that architecture is - it's very important that it responds very carefully to the context around it. Each building is part of a larger ecosystem that creates meaningful places, beautiful places to walk, live, places that are memorable. That really is a kind of a train of thought that I think we've carried through all of our work to this day.
00;03;43;20 - 00;03;54;16
DP
So, the greater majority of the work that you guys do is traditional. Has that been challenging in any era over the course of the last 50 years when people were doing more modern architecture and...
00;03;54;26 - 00;04;42;08
SN
Well, it certainly is today. We never sought out to be traditional architects in that sense. One project begets another, and like many architects, we sort of get known for our buildings and what we do. And I think in terms of that stylistic leaning, if you will, it's a bit controversial these days, I think, particularly within the architecture design community, where I think there is a tendency amongst the majority to want to look forward in sort of the past is the past, let's look to the present and let's look to the future.
I think for us, architecture is primarily about communication. And what we mean by that is that buildings in their edifices say something to people and it's really important that they engage with the communities that they serve.
00;04;42;20 - 00;04;58;02
DP
Yeah, it's interesting talking about classicism, traditional architecture, having a kind of language and speaking to the community in a certain way. Right. It's kind of understandable language for many people. You see, especially in Washington.
00;04;58;10 - 00;05;02;25
SN
It is, it's a very legible language of building and design. Absolutely.
00;05;03;03 - 00;05;05;14
DP
So, tell us about your role in the office.
00;05;05;27 - 00;05;33;12
SN
I'm a principal in the firm. I've been with the firm since I finished graduate school back in the late nineties. I started out as an intern and then, as you could imagine, sort of worked my way up through architect staff and project architect and then project manager. I spend most of my time communicating and working with teams of people in the office. Design, for us, is a very collaborative sport. The office is a very collaborative environment.
00;05;33;12 - 00;05;33;28
DP
That's great.
00;05;34;05 - 00;05;59;17
SN
I think one of the most interesting things to me is the founder, David Schwarz. I have rarely ever seen David pick up a pencil and draw something, but he commands a great deal of influence and quality oversight of the firm's body of work, largely through talking to people, getting to know each of us. And I in turn try to do the same.
00;05;59;25 - 00;06;02;08
DP
Well, you've been there a long time. It sounds like you've got a great boss.
00;06;02;14 - 00;06;07;06
SN
He is a great boss. We got a great group of people around me. I consider myself very lucky.
00;06;07;12 - 00;06;20;27
DP
Oh, that's really cool, because, I mean, architecture is challenging enough, right? It's a challenging profession. Very difficult business. We're all architects, right? So, we're all a little self-absorbed. To find somebody you enjoy working with and for is wonderful.
00;06;21;02 - 00;06;22;01
SN
Yeah, it's very important.
00;06;22;04 - 00;06;34;02
DP
Yeah, that's great. So, let's dig in here. Let's talk about the residential college project at Vanderbilt and specifically the Nicholas S. Zeppos College building. How did your office get this project?
00;06;34;15 - 00;07;25;15
SN
Well, it goes back to a master plan study that we did. Oh, at least 15 years ago, we conducted a study. The university was interested in reorganizing student life on campus, and they struck on the idea of the residential college model, which grows out of a very well-established tradition that starts on the other side of the pond by places like Oxford and Cambridge.
And then it comes to the States in the early 20th century with the Ivy League institutions like Yale and Harvard and Princeton. And what they really liked about it was this notion of breaking down the larger student community into smaller communities of a few hundred people. So, we developed this master plan that sort of provided strategic opportunity areas on where these colleges could be located.
00;07;25;21 - 00;07;28;28
DP
So, they came to you with this idea. There would be four colleges.
00;07;29;06 - 00;07;38;02
SN
They came to us with a very broad idea of, “we want to rethink student life on campus,” and through conversation, the residential college model came out of that.
00;07;38;02 - 00;07;38;21
DP
Wonderful.
00;07;38;23 - 00;08;00;27
SN
And then opportunity areas across campus. We identified sites. They then constructed what they called the freshman campus, the freshman college, if you will. That's where all first-year students go to live and there was a bit of a lull. And then we sort of came back with this more defined project of the four colleges, of which Nicholas S. Zeppos is number two.
00;08;01;08 - 00;08;07;11
DP
So, had you been hired at that point or were you working against other architects to try to get the project?
00;08;07;16 - 00;08;17;01
SN
No, we had been hired at that point. We had done other work in Nashville, most notably the Schermerhorn Symphony Center, the Nashville Symphony's concert hall.
00;08;17;01 - 00;08;18;02
DP
So, they knew of you.
00;08;18;03 - 00;08;22;19
SN
So, they knew of us. And we just developed good, strong relationships in the community.
00;08;22;20 - 00;08;31;27
DP
That's great. It's a great way to get jobs. So, can you tell me a little bit about the history of the place, the town, the neighborhood, the buildings around the site?
00;08;32;04 - 00;08;52;00
SN
Sure. In Nashville, it's a fascinating city with great heritage and history. One of its monikers is the Athens of the South. They have a full-scale replica of the Parthenon on Centennial Park campus, which is actually just across the West End Boulevard from Vanderbilt.
00;08;52;02 - 00;08;55;07
DP
I'm sure I've seen photos of this and have forgotten. That's incredible.
00;08;55;17 - 00;08;59;15
SN
It. It really is. Every detail is fully, faithfully executed.
00;08;59;16 - 00;09;02;07
DP
I'd love to talk about that some time but go ahead.
00;09;02;17 - 00;10;17;15
SN
But that's not why it's called the Athens of the South. It's called the Athens of the south because of the number of institutions of higher learning that one finds there. So, you have Fisk, you have Vanderbilt, many institutions. And it just at a sort of a per capita level. It developed this sort of bookish, erudite culture. Another thing that helped reinforced it was there's a great deal of publishing that happens there, mostly religious, and musical publications.
So anyway, so it's the Athens of the South, so that's really neat. The Vanderbilt history is really interesting because it's basically it's founded as an outgrowth of the Civil War. The institution, it was basically viewed by its namesake who endowed the starting of the university as a kind of a healing moment between the North and the South.
Cornelius Vanderbilt. And he has a statue, obviously, in the heart of campus. The campus itself is - it's a really beautiful green garden-like setting. It does have the classification of being an arboretum because of the number of unique specimens of trees one finds there. The architecture is quite eclectic. Like most campuses, there's a kind of a historic heart of Victorian era buildings and some collegiate gothic buildings as well. And then it sort of evolves over time.
00;10;17;24 - 00;10;31;07
DP
So, you touched a little bit on what these college buildings are composed of. Could you give me a little bit more information about the programmatic requirements of each of the four buildings - or let's just stick to the Zeppos College building?
00;10;31;12 - 00;12;03;17
SN
Yes. So Zeppos houses 340 students. We typically say beds. It has 340 beds. So that's the lingo in that business, if you will. And it's viewed as a really holistic living environment for students. Not only are there places to sleep, but there are also places to study, places to gather. There are places to eat. There are even accommodations for some resident faculty. Each of the colleges, or at Zeppos, has a family - faculty member and their family has an apartment within the facility. And they help provide leadership and mentorship to the student community.
So, and all of those things are fully realized programmatically with dining facilities. There's a really great dining hall in Zeppos. There's a great room, as we call it, a large living room with wood paneling, courtyards. So there's nice quality, secure, defensible outdoor space for the students to use.
On each of the floors, it was a really interesting challenge because we're dealing with a lot, even within that reduced footprint of only 300 odd beds, it's still a lot of program, a lot of footprint to have to manage. So, to create a sense of place that's navigable and somewhat homelike and approachable and familiar, we did some interesting things within the student floors. There's a lot of articulation in the building massing, and we offset the double loaded corridors to create nodes and they tend to coincide with elevators and stairs so that we create places for students to naturally bump into each other.
00;12;04;00 - 00;12;16;08
DP
Well, I'm going to actually ask you about that in just a minute. So first, let's back up and talk a little bit about the site and the topographic features, if there are any. Or are they just completely flat?
00;12;16;19 - 00;13;04;06
SN
No, there is a bit of grade change from - I have to get my compass directions right - from east to west. I think what's most interesting about the site is it has kind of a two-sided nature to it. So, on one side is West End Avenue, which is a major east west thoroughfare that connects with downtown Nashville. It's sort of the public face of Vanderbilt. So, the colleges were a real opportunity to sort of enhance the university's image to the outward community.
And then on the other side, the opposite side is a very opposite kind of condition. It's a series of very low scale residential structures that house the Greek community. So, several houses, each one is a fraternity or a sorority. So, we had to respond to two very different contexts on each side of the building.
00;13;04;17 - 00;13;08;22
DP
So, tell us a little bit more about the building plan. You started getting into that.
00;13;08;29 - 00;13;29;25
SN
Sure. So Zeppos is a figure eight with two courtyards. What makes the figure eight is what we call a double loaded bar, if you will, on the upper student room floors. You have rooms on both sides of a corridor. And again, there's interesting offsets in those corridors and bars to help break down the massing.
00;13;30;04 - 00;13;32;25
DP
Does that create these large gables?
00;13;33;00 - 00;13;48;03
SN
Yes. And then and then some of the bars, we actually punch through to create Gables to help break down and articulate the massing of the building. It's basically a city block. So, all of those moves are really important to help make the building very approachable and friendly.
00;13;48;11 - 00;13;51;14
DP
Are all four college buildings a city block.
00;13;51;26 - 00;14;14;09
SN
About. They each layout a little differently from one another. The one immediately to the east of this one, Rothschild College. That one has three courtyards. Due to the particulars of that particular site and obviously what makes the Zeppos college most special amongst the four of them is this 300-foot tower at one end of it.
00;14;14;17 - 00;14;20;03
DP
So that's a great segway. Tell us about the style of this building because it's stunning.
00;14;20;12 - 00;15;02;06
SN
It's a very faithful rendition of what's known as Collegiate Gothic. It was really very much a communication and really a marketing decision by the university in terms of we looked at lots of different vernaculars. What should these things look like? And the entire team ultimately arrived at Collegiate Gothic is the appropriate response. It is very much in step with this long-established tradition of higher education that goes back to the church in Europe and then institutions like Oxford and Cambridge, and then it comes over to the States with institutions like Harvard and Yale who are doing very much the same thing. They were trying to identify with this established tradition.
00;15;02;13 - 00;15;04;13
DP
Really? I mean, it makes perfect sense.
00;15;04;14 - 00;15;05;02
SN
Absolutely.
00;15;05;13 - 00;15;14;25
DP
So, were there any specific buildings that you can recall that you guys were looking at? The tower looks like it could have been pulled from the facade from a church in Europe. Right? I mean.
00;15;15;02 - 00;16;04;01
SN
Sure, we're very eclectic in our approach. We spend a lot of time looking at examples in books. We try to visit places in person, and that was a really important tool at the outset of this project is we actually took members of the client team on a little whirlwind tour of residential college examples around the country. Some examples that we looked to for the tower would be the Harkness Tower at Yale.
A slightly more atypical one that we did look at. It would be the Nebraska state Capitol and I think one feature that we quoted from that one is towards the top of the tower. As it starts to step in, you'll see what we call a little lantern, a little limestone lantern on each of the four corners. That's a common type feature in this style of architecture. When you're creating a tapered tall form like this, we thought it worked very well.
00;16;04;09 - 00;16;11;29
DP
And you chose brick for the majority of the material for these exterior facades? Tell me a little bit about that.
00;16;12;07 - 00;16;45;17
SN
Well, we always want our buildings to have a really rich palette of materials. And that's true of the interior and, of course, the exterior. So here the palette is a combination of brick, carved Indiana limestone, and then an accent stone, which is called Crab Orchard. It's actually a stone that's native to Tennessee. And we thought that was very appropriate to sort of weave in a local material that one finds in and around Nashville. The brick in particular is really interesting because we knew we didn't want a stark read of just one color.
00;16;45;19 - 00;16;48;08
DP
Right. Like if the building was all limestone.
00;16;48;08 - 00;17;09;26
SN
Like it was all limestone. And even within the brick itself, it's not just one brick, it's actually a blend of three bricks. And we did lots of mockup panels with the help of a very patient Mason, and a very patient local brick distributor who gave us about an acre of their brickyard to do all these different experiments.
00;17;09;27 - 00;17;10;16
DP
That's so cool.
00;17;10;16 - 00;17;46;22
SN
We tried different blends and we ultimately settled on a blend of three bricks for the college, and then we further augmented that with what we call decorative bond detailing. So, if you look closely at some of the details, you'll see brick that's fashioned into basket weave patterns, sawtooth patterns, what's known in England as diapering, which is creating a sort of a diamond checkerboard pattern. And we use different bricks for that as well. They tended to be iron spot bricks that are really beautiful because they catch and reflect light in different ways depending on how the sun is hitting them.
00;17;47;06 - 00;18;26;25
DP
Yeah, so it's interesting. We've got this polychrome going on, so you guys have the red brick and then I see these diamonds which are made from a different color brick, and then you're taking that one step further. You're backing off the changes in color perhaps, and you're changing the direction of these bricks and the patterns on the interiors.
I mean, it just takes so much time and thought to do everything you guys are doing on these facades. How much time did it take? Just doing like the design work? And who was doing that design work in the office? How were you doing these drawings and how are they being reviewed? I mean, there's a lot going on here.
00;18;27;02 - 00;19;17;26
SN
There's a lot there. I mean, the process is really key and it's a very layered process. You don't start out drawing detail. You start out with a parti and then you look at the plan and then you study the massing and then you get to a point and that's schematic design and that was probably about five months. And then we launch into design development.
We are refining the details and that was probably another six months of design development. And within both of those design phases, it's hand sketching, physical study models - we still love doing old fashioned models, just cutting out of cardboard and matte board - as well as two-dimensional drafting. And then, of course, actually three-dimensional modeling and digital modeling in the computer. That was a really key tool.
00;19;18;06 - 00;19;22;26
DP
With all these bricks and all those patterns. Must have been an unbelievable process.
00;19;22;26 - 00;19;45;28
SN
Yeah. And then it all has to be documented. It's a beautiful project. The standards were very high at the same time we did have a budget and doing cost take-offs at each of the milestone levels of completion - at schematic design and design development - were very important and they caused us to have to do some recalibrating and some adjusting to keep the thing on budget and on track.
00;19;46;09 - 00;19;52;23
DP
Yeah, I mean, you sit down with the clients and show them some of this stuff and I'm sure the first words out of their mouths is how much is this going to cost, right?
00;19;52;25 - 00;20;12;01
SN
Sure. It's interesting. In the earliest design packages, schematic design, you just can't draw all the detail. So, we actually put photos of collegiate gothic buildings in the drawings to help the contractors really get their head around, okay, this is really complex here. This is not your typical...
00;20;12;14 - 00;20;19;14
DP
And there had to have been a lot of handholding in the field too. I mean, a lot of the detail, like the variegated quoins, the quoining on the corners.
00;20;19;14 - 00;20;23;19
SN
Yeah. Every one of those stones is actually laid out in the design.
00;20;23;27 - 00;20;30;16
DP
All the dimensions, the materiality, the color. Like everything. Wow. So, there's a lot of details.
00;20;30;27 - 00;20;39;27
SN
Yes. I mean, it's a phone book level – for anybody who remembers what a phone book is – a phone book thickness level of drawing and documentation.
00;20;40;04 - 00;20;51;19
DP
Tell me a little bit about the limestone work, because, again, the level, the detail and the wonderful intricate detailing, I mean, you've got to draw and then you got to find somebody to make that.
00;20;51;28 - 00;21;24;16
SN
It's southern Indiana is limestone country. Indiana limestone. It's where the stone is quarried and it's where it is still fabricated. To this day, it is grand tradition. It goes back to the mid-1800s. It had its heyday in the early 20th century with, one just imagines, the proliferation of limestone buildings one finds in any great city in the U.S. and then it gradually tapered off from there after the war in particular. But there are still a few very dedicated fabricator firms that do the what they call the cutting.
00;21;24;23 - 00;21;30;24
DP
It had to have been hard to find somebody with so few people doing this kind of - this level of detail work.
00;21;31;07 - 00;21;44;12
SN
Well, there's one firm we've worked with on almost all of our projects. And they’re still - this is what they do. They are perfectly set up to do it, Bybee Limestone. We know them very well. We love them and they know us. And they love us too.
00;21;44;12 - 00;22;05;24
DP
Yeah, it's stunning. So back to Brick for a second. Did Brick solve any particular design challenges for the architecture for the client? I mean, you touched a little bit on the color, on the exterior and the feel of the architecture, right? We talked about the fact that you make this building all limestone. You got a problem. I mean, it's just a monolith.
00;22;06;06 - 00;22;38;17
SN
Yeah, well, it's a very warming material. It's very appropriate, in particular, the way it's used here for what is essentially a residential place. It's a very approachable, it's a very durable material, obviously. And sustainability is very important. We think one of the most important aspects of sustainability is building very consciously, using resources very consciously and very wisely. And in building something that will hopefully be around for a very long time. This building will be around for a very long time.
00;22;39;05 - 00;22;45;02
DP
That's for sure. Were there any unique construction details that you guys developed as you were working on this?
00;22;45;12 - 00;23;50;11
SN
Yeah, as I mentioned earlier, architecture is a very collaborative sport, and we didn't do this all ourselves. We had a very dedicated architect of record Hastings Architects out of Nashville. They were very faithful in working with us to realize all of the technical detailing, achieve what we're trying to achieve aesthetically, and then a really good contractor late in construction. They were very on top of things the whole way.
I'd say a couple of specifics: one of the things, the details that makes the colleges really fun and interesting are these ornamental chimneys that you find on the roof. And the contractor hit on a really interesting idea because in particular after the previous college where they did not do this, they elected to construct the chimneys on the ground, and then hoist them into place with the tower crane. That allowed them to advance construction on the roof without tying up a huge amount of roof area with scaffolding and preventing them from drying in the building. It was just a much easier erection process down on the ground.
00;23;50;21 - 00;23;53;09
DP
You just have boiler flues going through these things. I mean.
00;23;53;16 - 00;23;58;06
SN
They're vents, They're flues. Yeah. So, they do they do serve a functional purpose as well.
00;23;58;07 - 00;24;05;00
DP
I think that's a wonderful touch. You wouldn't expect to see these chimney masses on a building like that. They really kind of set it apart.
00;24;05;07 - 00;24;46;07
SN
One other quick detail is it sort of goes back to the documentation. After we get even through CDs and in construction, there's then what's known as the submittal process where shop drawings are submitted and the contractor hired one firm, an engineering firm that was sort of the central documentation point for all of the masonry. Typically, you would have separate drawings for brick and limestone, and in this case, the Crab Orchard. So, we had one firm that was weaving all of that together. It really helped the coordination and adjustments that had to be made to some of the technical details because it was all in one place. You know, it's also this is modern cavity wall construction.
00;24;47;13 - 00;24;49;03
DP
That’s a good point. Okay. So how does that work?
00;24;49;11 - 00;25;23;18
SN
So, there's a concrete superstructure between the slabs. We span metal studs. And then much like any building, we pack insulation between the studs. There's exterior rated gyp. board and then a barrier coating that goes over that and then some additional installation in some cases to get the proper R-values. And then the brick is hung off the building. It's built the way modern brick buildings are built today. Cause it really had to be, because that's just how we build - that's how people know how to build. Yet, we're trying to achieve something quite different in the aesthetics.
00;25;23;25 - 00;25;26;07
DP
Did you guys use any brick on the interior?
00;25;26;18 - 00;26;01;09
SN
So far, no. But there's one last college that's under construction and we were using brick in the dining hall of that one. It'll be a thin brick that's applied to the inside wall surface, but it's been a fun opportunity and a challenge at the same time across four colleges, because we want them all to fit within this collegiate gothic vernacular.
But yet, we want each one to be slightly different, so it's identifiable and to the community that lives there in a larger community as well. So, finding subtle, fun, different things we could do from one to the next was always one of the most interesting and challenging parts of this.
00;26;01;21 - 00;26;10;17
DP
I was thinking about while we were talking about the general contractor that you worked with. Was it a bid job or did you guys go immediately to the GC?
00;26;10;27 - 00;26;31;26
SN
They were a construction manager. So, they were brought on board early in the process during design. We like working that way because we like getting the technical expertise and input during design. We can constantly be moving forward as opposed to taking three steps back if a contractor comes on much later and says, “I wouldn't have done it that way.”
00;26;32;01 - 00;26;37;09
DP
What I was getting at was whether or not you had any challenges finding a really good mason.
00;26;37;19 - 00;26;48;06
SN
You know, it's interesting. It's lots of masons. There was a mason subcontractor, but they in turn subcontracted. It would be interesting to ask them. I know it was a challenge.
00;26;48;08 - 00;26;50;21
DP
Finding the right people to do the work.
00;26;50;21 - 00;26;51;17
SN
The right skill set.
00;26;51;23 - 00;26;57;11
DP
It's always a challenge for every architect. So, Steve, what was your favorite part of the project?
00;26;57;22 - 00;27;36;01
SN
I really enjoy the design development phase. We're really getting in and figuring out details. It's a level of problem solving that I find really interesting because in the earlier design phase, we sort of setting up the game board and making the major moves, but then to go in and make each one actually work and really figure stuff out and all the tools that we used to do that and it's a really interesting variety of tools, whether it's a half inch scale model of a corbel that's sitting on my desk or a sketch or the digital model, I just find problem solving at that level to be really, really fully engaging and satisfying.
00;27;36;10 - 00;28;02;24
DP
It's great. It takes a long time for most people to find what they really love about the profession, right? I mean, some people end up doing everything they've small offices, some people end up doing one thing one or two things inside of an office. It's a challenging business. It's a challenging profession. I think it's really nice that you're as happy as you are doing what you're doing and as good as you are at it. That's wonderful.
00;28;03;02 - 00;28;24;05
SN
I think one of the other interesting things, I use the word ownership a lot with the teams in the office and in design development. It's a really great opportunity to give individual young designers pieces of the building to figure out and design. When it's all done, they can come with me to the site and they can look at that point and yeah, I did that. That's really cool.
00;28;24;05 - 00;28;30;16
DP
Oh, that's great. So, Steve Knight, it was great to have you here. Where do people go to find you and your firm?
00;28;30;20 - 00;28;41;29
SN
Go to our web site www.dmsas.com. And if you're in Washington DC, come by and pay us a visit. 1707 L Street
00;28;43;00 - 00;28;47;09
DP
You get to meet some of our listeners. That's wonderful. Well, thank you very much, Steve Knight.
00;28;48;00 - 00;28;49;12
SN
Thank you, Doug. It's been a pleasure.
You May Also Be Interested In
We Can Help With Your Next Project
Discover the latest + greatest in design trends, industry news & pro tips from pros.
For all of your project needs, you’ll find everything you need at a Supply Center.
Let Us Know How We Can Help!
Design Vault Ep. 11 Surf Avenue with Jay Valgora
ABOUT THE ARCHITECT:
|
Inspired by the industrial architecture in his hometown of Buffalo, from the grain elevators to the steel mills where his father worked, Mr. Valgora pursued his passion for architecture. Receiving degrees from Cornell University, Harvard University GSD, and a Fulbright Fellow to the United Kingdom, he gained valuable experience in firms from Boston to London. Finally arriving in New York City, he honed his experience at classic firms before founding STUDIO V Architecture, a practice dedicated to the reinvention of the city. Mr. Valgora’s work is defined by an extraordinary range of projects and scales, encompassing new construction, adaptive re-use, renovation, and interiors. His designs have been internationally recognized for engaging history, culture and context with innovative contemporary design: creating inspirational public spaces, encouraging diversity, restoring historic artifacts, and bringing new life to the edges and interstices of our city while reconnecting communities. |
---|
Surf Avenue
Studio V
View ProjectTRANSCRIPT
00;00;00;02 - 00;00;05;12
Doug Patt (DP)
Let's go inside the vault. The design vault.
00;00;05;14 - 00;00;33;10
Jay Valgora (JV)
So, it's very complex. It's two residential towers and it's mixed use. It has retail at the base with a series of astonishing amenities and public spaces that link them together, including a fantastic pool deck overlooking the ocean, overlooking the roller coaster, and a whole series of public spaces. Because, you know, there's a social life to a building, too.
00;00;33;17 - 00;02;02;09
DP
This is my guest, Jay Valgora. I'll share more about him shortly. In this episode of The Design Vault, we highlight Jay's project 1515 Surf Avenue. It is a two tower, 26 and 16 story residential building complex in Coney Island, Brooklyn, designed by Studio V Architecture. This street corner project will span 470,000 square feet and yield 461 units 139 designated for affordable housing and 11,000 square feet of ground floor retail.
The building facade is variegated white to cream colored brick, with the main building podium facing Surf Avenue, featuring a soaring ground floor elevation with several diagonal columns, its sloped roofline is further defined by a stepped series of wooden platforms the design team calls the vertical boardwalk. The building features curved glass lined balconies and amenity deck heated pool and green roof.
Residents have panoramic views of Coney Island Amusement Park and the Atlantic Ocean. The total outdoor space will span over 20,000 square feet. The building includes a fitness center, lounges, co-working spaces, indoor basketball court, handball court and accessory off street parking. When completed in 2024, the property will be the largest geothermal heated and cooled building in New York City.
00;02;02;12 - 00;03;17;08
DP
Hi, I'm Doug Pat and this is Design Vault. Jay Valgora is the founder and principal of the architectural design firm Studio V Architecture in New York City. Jay grew up in Buffalo. He tells the story that it was the steel mills where his father worked and the historic grain elevators of Buffalo that influenced him to become an architect.
Jay received his Bachelor of Architecture at Cornell University and his master's degree at the Harvard Graduate School of Design. He was also a fellow in the Fulbright program to the United Kingdom. At Harvard, Jay studied under Pritzker Prize winning Portuguese architect Alvaro Cesar. Mr. Valdora is on the forefront of urban design with nine projects on the New York City waterfront.
He works closely with entrepreneurs to create innovative designs and programs, collaborates with government agencies to address policy infrastructure, environmental issues and approvals, and is deeply engaged with communities through innovative public space design. Welcome, Jay. Nice to have you with us today. So tell us a little bit about Studio V architecture in New York City. Where are you guys located? What's the size of your firm and what type of work do you do?
00;03;17;11 - 00;04;07;23
JV
So Studio V is right in the heart of Manhattan. You know, we're right in the middle of the island. I like to say that we live in a city of four islands and a peninsula, and we're right in the middle on 32nd Street and Park Avenue. Actually, by the time you broadcast this or soon thereafter, we've even purchased a small building, which we're currently redesigning right now, and we'll be moving to 111 East 29th Street, where we've created our own studio, which is currently under construction.
I guess the only other thing I can tell you is that Studio V is really all about the people. We have a really incredible range of people that work with us. We're about two dozen, and so we really see ourselves as a boutique architecture firm, but we handle tremendously large and complex projects because we have a really wonderful team and very diverse clients and very diverse projects. So we really pride ourselves on doing things that are a little bit different.
00;04;07;26 - 00;04;13;20
DP
So tell us a little bit about the firm. When did you get started and what's your role in the office now?
00;04;13;27 - 00;04;57;04
JV
So I began the firm and founded it in 2006. So I guess we've been around about nearly eight years and I'm the principal and the founder of the firm, but I have seven senior staff. They collaborate with me on all the projects. It's really an open atelier. I intentionally always call it a studio. It's not really an office, it's not really a firm.
It has the whole atmosphere and character of a studio. We have no offices, we have entirely open spaces. We have huge collaborative areas. So my role really is to work with and inspire the great designers and talented architects with whom I work and to provide leadership. But really they play an essential role. It's not Valgora architects, it's Studio V, and the studio really comes first.
00;04;57;08 - 00;05;10;16
DP
It's really interestingly described. I haven't heard somebody talk about their office like that. So tell me a little bit about how you get your people to pull mostly from New York City? And do people hear about your office and they want to work for you?
00;05;10;20 - 00;05;59;16
JV
We have a really diverse range of people, but there's sort of a running joke in Studio V that isn't really intentional, but somehow it proves to be true. I would say that many of the people at Studio V come from two places. It's really not intentional. It's not a policy. But many come from the heartland of America. I myself grew up in Buffalo and I consider that really secretly to be part of Ohio, not New York state.
It's completely part of a midwestern kind of ethos. And many of our talented architects come from around the American heartland in the Midwest, but the other half come from all over the world, throughout Europe, Asia, South America. And so I'm very proud of the fact that we really are part of New York City and kind of represent the diverse talents that come from New York City. And yet I think we're also grounded in certain optimistic ideals that come from my upbringing.
00;05;59;18 - 00;06;08;03
DP
Well, it's really great to hear. So let's dig in here and talk about your buildings. So tell us a little bit about 1515 Surf Avenue. So how did your office get the project?
00;06;08;05 - 00;06;58;14
JV
Well, first, we really can't do great projects without having a great client. And LCOR is our client on this. And they approached us with the building and it was really a breakthrough building for us. So Anthony Tortora, who is the partner at LCOR, knew me from another firm at which he had worked before, and he decided he wanted to give us a try.
But they did a competition and they put us against some really other serious architects, and we were really proud of the fact that we were able to prevail in that. I think it's all about the power of our ideas. It's about the design concepts that we bring, but also about solving our client's problems. And I think Studio V is really about those two things.
It's about maintaining ideals and an optimism about what a great design could be, and at the same time solving our client's real problems about bringing a project in on budget and doing something creative that they can actually build and that meets their needs.
00;06;58;17 - 00;07;01;28
DP
So how many people were involved in the competition to get the job?
00;07;02;04 - 00;07;45;09
JV
There were a handful of us. I put a couple of my best designers on it. It was a paid competition, albeit a small amount. Yes. And so we were up against these other serious firms. And really, I'm sure we spent three times the amount, but I was determined to do something special for it. And also I was inspired by Coney Island.
The principal, the partner, Anthony, actually grew up near there and he really was committed to the idea of remaking this neighborhood and that also fit studio visit. Those were really interested in transforming communities, rebuilding communities. And Coney Island has an incredible history and past and yet has suffered terribly under urban renewal and other elements. And so now we see this as one of the signature projects that's helping reestablish this really important and historic neighborhood.
00;07;45;17 - 00;07;51;07
DP
So that's a great place to start. So tell us a little bit about the history of the location where this building is.
00;07;51;14 - 00;08;49;12
JV
So this is right at the corner of Surf Avenue there, these great street names in Coney Island. You know, it's between Surf and Mermaid Avenue, and it's between 15th and 16th Streets. As a matter of fact, it's right across the street from a roller coaster and sits right on the beach with stunning views of the iconic Coney Island Beach and boardwalk.
So to me, I don't know if I'll ever get to work on a site again that is next to a roller coaster overlooking the Atlantic Ocean with stunning views of the historic parachute drop. It looks diagonally right down at Nathan's Hot Dogs. And it's catty corner to the iconic cyclone. So really, it's a fantastic site. Historically, all of these elements that I just described were part of it.
And historically it was part of the whole Coney Island landscape. But by the time we got there, it was a parking lot. There was nothing there. And so really it's an opportunity on this major avenue that had so much historic importance in Coney Island to really help rebuild one of the essential centers of this community.
00;08;49;19 - 00;08;55;18
DP
Yeah, you must have been amazed when you got out there and stood on that property and looked out, thought, wow, this is going to be really cool.
00;08;55;25 - 00;09;17;26
JV
Even now that construction is going along very well and it's fully tapped out and they're adding all the facade elements as we climb up through the building. It's stunning the relationship it has to the Manhattan skyline, to the ocean, to these iconic architectural rides and amusements and buildings. It really sits in the landscape and kind of draws these elements into it in a way like no other site I've ever had.
00;09;17;28 - 00;09;21;24
DP
So what was the scope of the project? What were the client's programmatic requirements?
00;09;21;27 - 00;10;02;00
JV
So it's very complex. It's two residential towers and it's mixed use. It has retail at the base and one of the towers is market rate and the other is affordable. And yet they wanted us to treat them both with the highest degree of quality, with a series of kind of astonishing amenities and public spaces that link them together, including a fantastic pool deck overlooking the ocean, overlooking the roller coaster, and a whole series of public spaces.
Public spaces, meaning spaces for the residents to share because, you know, there's a social life to a building, too. And I think this is one of the key elements of the building that we were inspired by the social life of residential buildings in New York and how we could create spaces that would bring people together.
00;10;02;07 - 00;10;14;15
DP
So let's talk a little bit about the building design. So we already discussed the site. There weren't any unique topographic features raised, just a giant flat parking lot. Was it a parking deck or was it just a giant lot?
00;10;14;21 - 00;11;14;17
JV
It was an open parking lot, and I guess the geographic features would just be these iconic buildings and structures that surrounded it and the ocean itself. The ocean is one of the key elements that did really influence the project, though, because there's a topography to the project, even though the site was flat that responds to the ocean. And that, of course, is resiliency.
You'd mentioned earlier, Doug, that we do a lot of waterfront projects. And one of the things for me is that this sits in the middle of a vast floodplain and we're creating 461 new residences, and we're really at the forefront of dealing with resiliency and climate change. We're very proud of the work we do there, including pro-bono work.
So one of the things we had to do is elevate the entire building and yet still really engage the streetscape. So as a matter of fact, this led to the main design concept, the vertical boardwalk, the idea of elevating the building with a series of step platforms that protects it, and major storm events such as Sandy, and yet also creates a series of spiraling public spaces that work their way up through the building and create these stunning views of the surrounding landscape.
00;11;14;24 - 00;11;23;13
DP
So that's a good way to segue. Tell us a little bit about the project restrictions, the zoning codes, how far off the ground to the building have to be raised?
00;11;23;16 - 00;12;56;02
JV
Sure. So of course, like most buildings in New York City, it's an as of right building. So we worked within the existing zoning ordinance. And so in a sense, some of the massing of the towers was pre-established city planning had done a rezoning of this community a few years before, and that actually led to this development and has helped catalyze the transformation of Coney Island.
But then within that, there are certain requirements from FEMA and from flood requirements. But I'll tell you also that the client was very supportive of this. We exceeded those requirements. We didn't just meet the code, we added additional feet of elevation. We did three feet of free board. On top of that, we really pride ourselves on exceeding the code requirements.
As a matter of fact, after we finished the initial permitting of the building, the city amended the code partly in response to advocating that we had done in order to allow buildings to increase their height, to allow extra elevation for climate change and have that not count against the development because it's a positive thing to lift the building up.
The other thing we did that was also important though, is not just lifting it up, it's still engaging the street. So for example, at the corner of 15th Street and Surf Avenue, we created this great porch as the client had this idea that we really need to bring back the streetscape, the retail streetscape, and that would be a fantastic site for a restaurant.
So we created this wonderful porch that has multiple levels that actually allows it to engage the street instead of being too far elevated seven or eight feet up. That's only three feet up. And we allow that to flood in a storm event. But it doesn't go into the building. And that way we can have these series of stepped platforms and public spaces that activate the streetscape and bring Surf Avenue back to life.
00;12;56;05 - 00;13;01;23
DP
So how do you do that? How do you make these objects that can flood and yet they're still functional?
00;13;01;29 - 00;13;53;26
JV
So we really worked with a great team of people, the overall residential levels and all the habitable levels are well above the floodplain. So they're really up to about elevation 13, which is three feet of freeboard above. These are NAVD 88, which is the datum that's used in New York City. And then for the lower areas, really the lobby is accessible.
So we're using flood barriers there to protect one tiny small area, which is a grade which allows the full lobby to be accessible. But all the areas are elevated and then the retail spaces are also elevated. But we stepped it down with this outdoor porch, and that's designed very specifically so that the floodwaters can come in, but they won't enter the building.
They just enter this kind of lower porch level that really engages the street. There's also a parking garage and that does go a bit below grade, and that is allowed to flood. But it has special vents and special technical requirements for the materials that allow it to be flooded and to drain out. And that's the right way to do it.
00;13;53;29 - 00;13;57;10
DP
So tell us about the building plans. We've got two buildings out there.
00;13;57;13 - 00;15;41;24
JV
So the building plans were really interesting. And this is one of the things we did in the competition. It's a little hard to describe, but there are the kind of inside corners of buildings where it's difficult to put residences, the kind of the reentrant in corners when you have large, complex residential buildings, it's difficult because you can't put windows there.
And so we came up with a really, I think, creative scheme, and that's actually what helped us win the competition. What we did is we took the left over the dead spaces where you could put windows and we created double height amenity spaces, public spaces for the residents, and we created the coolest, craziest collection of these spaces. There's a media library with a basketball court overlooking it and an elaborate kitchen and a pool deck and a gym.
All these different elements weave together and overlook one another. So we took the kind of hidden corners and places that you normally can't use in the development. And we created instead vast, soaring two story spaces overlooking one another, creating this almost voyeuristic experience where one space in one activity overlooks another. We find today, too, in a post-COVID environment or whatever environment we're in now, that more people are living and working in more creative ways, sometimes they're working from home, sometimes they're going to work.
And we think the idea of having this fantastic residence right on the Coney Island beach, but then you can work within the building. We created many different spaces for people to interact socially, for co-working, for living, for entertaining. And so these staggered multilevel spaces work their way all the way up through the plan. And it's even kind of telegraphed under the facade with this series of folded plans that you referred to earlier that really bring you all the way up to the rooftop and to the pool deck. And so this was really the big move on the plan. And the client was so excited about that that they awarded us the project.
00;15;41;27 - 00;15;45;04
DP
So how long was the design process then?
00;15;45;04 - 00;16;36;15
JV
Overall to do a building of this complexity, the complete design probably takes about a year. One reason why I think this was also a great client is we really collaborated from the beginning. We didn't just do a design and then hope it would work out. We worked with them at every step with their marketing people, their technical people, their construction people.
We did budgeting throughout, which is really important to me. As a matter of fact, it's critical that if we're going to do a creative design, we have to work with the client in order to figure out how we're going to hit their budget exactly, which I'm very proud of with this project. For example, we have a whole series of highly sculptural elements that are made of GFRC, glass fiber reinforced concrete, and they really wrap around the brick elements, which we'll talk about a little bit later and kind of create these wonderful transitions.
These are very complex forms, and we really had to work closely from the beginning to make sure we could meet budgets. Same thing on the brick. We're using some really unusual and more expensive and more fine forms of brick and custom brick that we'll talk about. And we had to make sure that we could really work within budgets and yet maximize the impact and create something that would be really special that hadn't really been done in this neighborhood before.
00;16;51;25 - 00;17;02;12
DP
So that's a good segway to style choice and the style that your office works within and the style that you chose for this building. Can you tell us a little bit about that?
00;17;02;18 - 00;17;58;10
JV
Well, I believe I'm an unrepentant modernist. I believe that we live in an astonishing time in the 21st century when we're redefining so many things technologically, socially. So I believe very much in creating works that are of our time and that are contemporary. But I love to combine that with traditional understandings of urbanism, of the way people live within cities and materials.
So, for example, a project like this really combines both of those where we're really using first we're creating very unusual forms, complex shapes. We're working with special computer technology in order to model these. We're working with computer numerically controlled bills and robots to actually build components of the building. And on the other hand, we're working with Brick, which is one of the most ancient materials that we have, one of the most enduring and beautiful materials.
And I love the idea that we're combining these different elements together to create something that is both timeless and of our time.
00;17;58;12 - 00;18;06;26
DP
So you said design was about a year long after that. What about city review? And then ultimately it's still under construction right?
00;18;06;28 - 00;18;59;24
JV
So I would say the total design process to complete all the technical documents and we did this project in Revit, we did it to the highest technical standards and construction documents, which is really helpful to figure out the different components takes about a year overall for the full design, but really at the same time as we're doing that, we're working on the permitting.
And so the permitting was really ready to go right at the conclusion of that. And because the project was as of right as we were developing the final technical documents, we were already going through the process of doing permits and then obtaining the foundation permit and then moving directly into constructions that really allowed us to facilitate the schedule and go quickly.
I would say one of the challenges on the design, which is really one of its greatest features, is the geothermal, because that required a lot of planning up ahead and doing a geothermal project of this scale in New York was very difficult in the construction because it required coordinating all of the geothermal wells with the foundation elements and doing that right from the beginning.
00;18;59;27 - 00;19;02;25
DP
So whose idea was it to do geothermal?
00;19;02;28 - 00;20;13;23
JV
I have to give the client credit again, like we really do a lot of projects that address sustainability, and I was very excited to do the largest geothermal project in New York, but it really required the commitment of the client and they had a great partner in Eco Save who was the engineering and geothermal firm that actually helped develop the geothermal systems and also work out the financial models that would allow it to work.
So this was really a terrific thing, but the client gets the credit and that's really also due to the changing codes in New York City, which are so stringent that the client felt it was worth the investment in new sustainable technologies. Well, actually, geothermal is a very old technology, but applying it in new ways, in ways that aren't typically done.
One of the things I'm most proud of is the second largest geothermal project in New York today, after this one's finished, is called St Patrick's Cathedral. So really doing geothermal on this scale for a residential rental building is the bread and butter of New York City, that kind of makes up the fabric of neighborhoods for me as groundbreaking. And also one of the buildings is an affordable building.
So the fact that we could do that level of sustainable design and help combat some of the future issues we're dealing with energy and climate change with this kind of building, I think is the extraordinary thing.
00;20;13;25 - 00;20;33;07
DP
So you said that you brought in the contractor early, so as a high end residential architect, we typically bring a contractor in right after schematic design to take a look at the project and help us determine whether or not we're going to be even close in terms of price, did that help you guys working with the contractor early on?
00;20;33;14 - 00;21;24;10
JV
Absolutely. And again, L Corps had a partnership with LRC Construction, So they're the construction manager doing the job. And really we worked with them on a pre-construction basis closely with the client. You know, often it's described as sort of a three legged stool with architects, you know, the architect, the owner and the contractor and really if one leg of the stool doesn't hold up, you know, it falls down.
And so really all three of us worked together intensely from the beginning. And this was critical, for example, with some of the brick elements, because we wanted to work with this beautiful format called Roman Maximus, very unusual format. We really found that very compelling. It was something we wanted to do from the beginning of the job and we had to work out how would we meet budgets, what would the cost of that be, how would we integrate that with the other elements, how much of it would we use? And so we really worked out those elements of the pricing very early in the schematic phases of the design. Instead of waiting till the end.
00;21;24;13 - 00;21;28;01
DP
Did you ever think about using another material rather than rrick?
00;21;28;03 - 00;21;56;05
JV
You know, we looked at different things for the building and we looked at GFRC at first for the whole building. But I love the idea of brick because I think it's such a classic material and in the end we ended up doing a hybrid where the brick is the majority material for the building, which I think works very well.
And the GFRC elements, these kind of sculptural concrete pieces are sort of the transitional pieces around the front entries and around the main amenity spaces and public spaces of the building. So I think it's very balanced by having both of them, although brick is the main material.
00;21;56;07 - 00;21;58;20
DP
So how did you end up dealing with Glen Gary.
00;21;58;22 - 00;23;19;27
JV
So Glen Gary really was very special for the project because they had this really unique product we've been looking for actually for years before I'd even heard of Glen Gary, I loved Roman Brick for my own studies. Even as a student at Cornell and at Harvard, I would travel extensively around the world. I would travel through Europe, and I loved the old Roman brick, which of course is a longer thinner brick.
And I saw in contemporary brick manufacturing they were starting to return to that. As a matter of fact, for years I tried to use it and so few manufacturers would really work with it. Then we found Glen Gary was doing something even more special. It was a longer thinner brick, what they call Roman Maximus, if you will. It's even more elongated and there's something special about that proportion.
It doesn't just stack up in the way that regular bricks do, which is fine too, but it almost creates a beautiful surface. And then we also did the detailing which was very important, where we created deep reveals along the horizontal edges of the brick. It's an old trick that Frank Lloyd Wright used to use. And so by creating a raked joint at the horizontals, it kind of creates this beautiful texture, almost like corduroy, and that along with the long, thin proportions of the brick, gives it a kind of a beautiful surface quality that's much more monolithic and much more beautiful.
And so we use this material all around the base of the building in order to really accentuate that and create a very strong presence to the street.
00;23;20;00 - 00;23;22;05
DP
So you had a good mason from the get go.
00;23;22;11 - 00;23;33;08
JV
We had to work very closely with our Mason and work out all of the details. Let's just say that there were a lot of mockups and a lot of reviews in order to make sure that we would maintain the quality of the project.
00;23;33;10 - 00;23;40;07
DP
So did you do drawings in house? First of combinations of brick or colors or you worked most of that out in the field?
00;23;40;09 - 00;24;06;17
JV
We actually worked extensively on all of that, so we had to work out special brick shapes. We did do curved bricks because they're a series of curves throughout the project, which were critical and we had to do specials for that. We work closely with the technicians at Glen-Gery as well as with the masons in order to work out how to do the specials.
We also had a great facade consultant, Frank Seta & Associates who were really integral to helping us work out the different components of the brick, the attachment, the waterproofing. They're really terrific.
00;24;06;24 - 00;24;16;10
DP
Interesting. We had talked a little bit about geothermal and sustainability. Was that a larger issue for some of the wall systems, insulation, etc.?
00;24;16;14 - 00;24;30;23
JV
Absolutely. I mean, the building has a very, very robust energy envelope and again, as I say, helped us with that as well as we did full energy modeling with IMG Engineering of the building in order to make sure that it met and exceeded really all the sustainability standards. Absolutely.
00;24;30;26 - 00;24;34;23
DP
So you talked a little bit about Revit. How long has your office been on Revit?
00;24;34;25 - 00;25;44;26
JV
That is a great question, Doug. So really, I guess we probably did our first Revit project ten years ago, and it was pretty early for us. We've always embraced new forms of technology and always embraced tools that help us be better designers. But I would say in the last several years, we've really moved towards using Revit on all of our larger projects.
We don't use it on every project yet, but more and more, even in our own office building, even on our own studio building that we're building out now for ourselves, we're doing the project and Revit, so we're moving towards using it now on smaller projects as well as definitely on all of our larger ones. I have to tell you what I like about it, in addition to the technical aspects, the way it helps you with construction takeoffs, integrating different components in real time of the architectural drawings, having them refer to each other, updating drawings. But I love it as a design tool. And in this project where we had this whole series of really interesting, complex spaces, Revit was terrific for actually allowing us to really make cuts through the building and understand the relationship of all the different components, relationship of inside to outside, relationship of one space to another, relationship of one material and how it meets another. Revit was fantastic as a design tool and really helped us do this building in particular.
00;25;45;04 - 00;25;57;23
DP
Yeah, I would imagine clients. Well, I already know this. I mean, clients love looking at three dimensional renderings. They come in and or you send them drawings by email and they're blown away right? I mean, it's like the building's already done.
00;25;57;25 - 00;26;53;19
JV
Renderings are a big part of what we do. And it's interesting here we were talking a little bit earlier because to me, one of the things I'm impressed by is we work really hard to make the renderings reflect the final design, but it's almost impossible to convey ideas of color and lighting and in renderings. People often think they represent reality, but you can manipulate it.
One of the things we did in the renderings for this project was we really tried to convey the color and character of the brick, where you could really sense the warmth of it when the light hit it and how it changes color and becomes a little bit more neutral and shadow. And it creates a real modeling for the building in sunlight, which I think is really critical.
And something I'm proud of with the renderings that we did is I'm amazed as the brick goes on now, I can see that it really reflects exactly how the brick is operating and how it takes on different colors and textures in changing patterns of light. It's especially important on a site like this, which is open and facing south directly overlooking the ocean. So it really gets tremendous light.
00;26;53;21 - 00;26;58;00
DP
Did you guys end up with any masonry on the interior? Any brick on the interior?
00;26;58;02 - 00;27;51;25
JV
So I love the idea of bringing inside and outside together. And so there are a few key places where we brought the brick into the interior. Actually, in the lobby we're doing something very special where I brought the brick right into the inside and actually made it a major feature right behind the front desk, kind of the entry point and I even pushed and pulled that great Roman Maximus brick to give it fantastic texture.
And we lit it beautifully. We're working with Susanne Tillotson, a remarkable lighting designer who's going to light up the texture of that. We're going to put artwork there too, and we brought brick into a few other places in the interior. Also, it's at the rooftop space that we call the Skydeck, where it folds in and becomes the base for some of the seating.
There's an area that we call the living room with the kitchen that overlooks a giant garden over the parking garage. And we pulled the brick in there too. It's in a few places in the entry sequence, going up to the gardens from the lobby. So I like the idea of referring to the brick. It's mostly on the outside, but there's a couple of key places where it makes its appearance on the interior.
00;27;52;02 - 00;28;10;29
DP
Might be a dumb question. You do a lot of projects along the water. Of course it affects the materials and the choices you make, but is it a large consideration for you in most of the buildings that you do? I see a lot of wood on the interior at the front entryway here. What are you guys doing? Are you treating those materials differently?
00;28;11;01 - 00;28;42;01
JV
Absolutely. So it's very important when doing projects on the water that we have to address that it really probably affects other things more. It certainly affects our window specifications. It affects the coatings used on the windows, which have to be to a higher standard. Again, this is where FSA was a great help to us. Brick is a great material for the waterfront because it's really a rain screen.
Brick doesn't really stop the water. The water barriers are behind the brick, but the brick itself is so durable that it does really well in, you know, difficult environments such as Coney Island where we really have a maritime environment and a lot of salt in the air.
00;28;42;03 - 00;28;44;22
DP
So how big was the team that worked on the job?
00;28;44;24 - 00;28;51;07
JV
Gosh, it's hard to say because there were so many different people. I would say, you know, a dozen people. And then, of course, there's a really wonderful team of consultants that we worked with. So a very large number, probably 12 or 15 consultants who really played a key role. And then the client too. It was really a tremendous team and a really great group effort.
00;29;06;26 - 00;29;16;01
DP
So did your office or you in specific learn anything unusual or interesting along this journey of making these two buildings?
00;29;16;07 - 00;30;10;16
JV
You know, I learned things from every project. My favorite thing about my job today is that I feel like I'm certainly teaching a great deal and hopefully working hard too, if I can lead and inspire. But I find my younger staff are teaching me every day. They're showing me how they're using the technology, they're showing me better ways of doing things.
So I learned a tremendous amount in this. I certainly learned a lot about and I thought I knew quite a lot about brick detailing, doing special bricks, some of the special fabrication we're doing, the robotic fabrication with the GFRC. And to me, every project is really an opportunity to figure out how can we do that even better? How can we apply to the next job, how can we build our body of knowledge?
I also love the fact that all of our projects are different. Our real signature at Studio V is that each design is really unique to that site, that client. So for example, we're doing another building with this client now on a different site in New Rochelle, and it's a completely different look and feel, even if the program is somewhat similar.
00;30;10;22 - 00;30;23;20
DP
It must be reassuring for the client, right? Because they feel a lot more special because the building you're designing every time the program changes and the site changes, you change with that, right? So that must be great for them.
00;30;23;25 - 00;31;20;04
JV
Exactly. Doug I don't believe in the idea of like the architect as an agent where they kind of put their name on it even. That's why I said it's not Valgora Architects, it's Studio V, it's a collective of people. And to me what's really important is that we find a solution for each project. We definitely have obsessions and themes that I think work through our work.
For example, we were just in the Venice Biennale early this year and we're still up actually, it's up through November and we showcase this project along with four other projects. And so one of the themes of that show was called On Edge, where we talked about all of our work, which is about edges, gaps, interstices, kind of repairing the frayed edges of our cities.
And Coney Island is one of them, both literally and figuratively as a community, as well as an oceanfront site. And so to me, the idea of instilling a series of social spaces within that and yet kind of repairing the edge of this community, remaking Surf Avenue and really helping be an agent for transformation is really what our work is about.
00;31;20;07 - 00;31;28;17
DP
So you've been an architect for some time. If you could give your younger self some career advice, can you think of something you'd tell yourself many years ago?
00;31;28;19 - 00;32;50;11
JV
I guess I've certainly made many mistakes in my career, and although those have been things that I've learned greatly from. But the other thing that's driven my career is optimism. Where I would often go from project to project, place to place, city to city early in my career, I actually found myself going from San Francisco to London to Toronto and eventually ending up in New York.
And really I feel lucky about that. So I guess in terms of advice, I'm wondering if there was a kind of serendipity to that kind of an unplanned nature to that, and I would almost hate to interfere with that. I think the freedom that I had in my youth to try different things, learn from different people, live different places, was actually the most transformative thing.
So I guess I would say that to myself, but I guess I was lucky enough just to fall into that. Maybe some of it came from where I grew up because I guess I couldn't really stay in Buffalo when my dad worked in the steel mills when I was part of those industrial buildings. That was just at the point when that was all failing and they were getting ready to tear it down.
Now, the mill where my father worked is no longer there, but now my greatest inspiration is to go back and try to reinvent those communities. One of the things I'm most proud of is that I'm going back to Buffalo and doing work there now to bring back my hometown and to create transformative buildings there, including at the old grain elevators at Silo City are other projects in the heart of Buffalo, like where we're doing projects over in the Elmwood District, our wonderful historic district where we're doing a new building now.
00;32;50;13 - 00;32;57;07
DP
Wow. Well Jay it's been great to have you here. Thanks for your time. Where can people go to learn more about Studio V Architects and yourself?
00;32;57;09 - 00;33;23;22
JV
Well, they can certainly find us online at StudioV.com. They can find us at our Instagram site. And most of all, you know, if you're ever in New York City, we'd encourage you to come see us. Come visit us at our studio itself, which is going to be at 111 East 29th Street. Or visit some of our projects, such as the Empire Stores, one of our most iconic projects in Brooklyn that's been very popular with people. We'd really welcome to have people get in touch with us or please come by the studio.
00;33;23;26
DP
Thank you very much.
You May Also Be Interested In
We Can Help With Your Next Project
Discover the latest + greatest in design trends, industry news & pro tips from pros.
For all of your project needs, you’ll find everything you need at a Supply Center.
Let Us Know How We Can Help!
Design Vault Ep. 9 PA State Archives with Paul Neuhaus
ABOUT THE ARCHITECT:
|
Paul Neuhaus, AIA, LEED AP is a senior designer for HGA in their Minneapolis office, and has been practicing for 30 years. Working in their Arts, Community and Education (ACE) practice group, Paul's project work includes studio arts and performing arts facilities, science labs, student centers, and life science classrooms for higher education; as well as libraries, a church, and very recently, a paper archive for the State of Pennsylvania.
Paul strives to engender a sense of community and belonging for those who visit and work in the buildings his team designs. Paul's process centers on discovering how the project site, culture, and program can shape space and take form, to reflect his client's aspirations and give dignity, purpose, and pleasure to people's lives. |
---|
PA State Archives
HGA
View Project00;00;00;00 - 00;00;05;12
Doug Patt (DP)
Let's go inside the vault. The design vault.
00;00;05;14 - 00;00;34;08
Paul Neuhaus (PN)
They wanted a full archive with plenty of space for growth into the future. The storage has different requirements depending on the kinds of documents. So, we needed to create spaces that allow them to continue to collect. And a lot of the people who come in to do research, which is another big part of what they do, they collect and preserve. But they also provide these documents to the public for access, for research, or just for curiosity and to learn.
00;00;34;11 - 00;02;55;10
DP
This is my guest, Paul Neuhaus. I'll share more about him shortly. In this episode from the Design Vault, we’ll highlight Paul's project, the PA State Archives. The new Pennsylvania State Archives Facility collects and preserves valuable paper documents while making them available to the public for viewing and research. The building is a state-of-the-art archival facility with an enhanced building envelope and HVAC system for the optimal environment to preserve historical paper documents.
The street facade features a linear, steel framed louver structure which surrounds a two-story high glass enclosed pavilion. The pavilion is connected to the main building, which accommodates the two public research rooms and staff spaces. While much of the building requires a windowless approach. A wide assortment of colored Norman size bricks were used to give the facade a varied and playful appearance.
The building used 350,000 brick equivalents in a blend of five different glazed brick colors. The building is three city blocks in size on three acres of land. The total storage area on three floors is 50,000 square feet and includes oversized, cool, cold, secure, and digital archives.
Hi, I'm Doug Pat and this is Design Vault.
Today we're talking to Paul Neuhaus, AIA, LEED AP. Paul has a bachelor's degree in art from California Lutheran University and a master's degree in architecture from UCLA Graduate School of Architecture and Urban Planning. Paul is a Senior designer for HGA. Paul is in their Minneapolis office and has been practicing for 30 years, working in their arts community and education practice group. Paul's project work includes studio arts and performing arts facilities, science labs, student centers and life science classrooms for higher ed, as well as libraries, a church and very recently, the building we will be talking about today, a paper archive for the State of Pennsylvania.
Paul strives to engender a sense of community and belonging for those who visit and work in the buildings his teams design. So welcome, Paul.
00;02;55;14 - 00;02;56;28
PN
Thank you. It's great to be here.
00;02;57;01 - 00;03;08;11
DP
It's great to have you with us today. So, before we get started, tell us a little bit about HGA architects. We know you're in the Minneapolis area. What's the size of the firm, the type of work you guys do?
00;03;08;14 - 00;03;26;05
PN
HGA is a national interdisciplinary design firm committed to making a positive, lasting impact for our clients and communities through research based holistic solutions. We’re a collective of over a thousand professionals in 12 offices nationwide.
00;03;26;08 - 00;03;30;21
DP
Wow. That's incredible. So how long has HGA been around?
00;03;30;23 - 00;03;51;26
PN
Oh, boy. We go back to the fifties. The office here in Minneapolis was the first office and Hamel Green and Abramson, the founders, started the firm. They were a well-known firm in the state for many years and grew over the years and became a dominant force here in the state. And today, they're the largest firm in the state.
00;03;51;29 - 00;03;54;09
DP
Do you have any other locations outside the state?
00;03;54;11 - 00;04;03;13
PN
Yeah, we have 11 other offices, so East Coast and West Coast mostly. We also have two offices in Wisconsin.
00;04;03;20 - 00;04;12;17
DP
That's a really big architecture firm. Tell me a little bit about the role that you play at HGA. How did you end up there and what are you doing now?
00;04;12;20 - 00;05;08;10
PN
I've been in the city practicing since 1992. As a matter of fact, I wanted to work for HGA when I first moved to the city from Los Angeles. Interviewed here a couple of times, and it just worked out that I got an offer from another firm in town and work for them. That was back in 92. And then I didn't end up working for HGA until 2014.
I was really attracted to the firm because of the high quality of the design they do. Even though they're a large firm, they really practice like a small boutique firm. There's a lot of collaboration and independent thinking here. They allow architects to really pursue individually on each project what they think the vision of that project should be. So, when you look at HGA’s work, you don't see a pattern of design that looks a certain way. Buildings and projects can go in a lot of different directions, and there really isn't a style for our firm, which is really the way it should be.
00;05;08;16 - 00;05;26;03
DP
Yeah, I mean, that's pretty unique. Most offices, you look at their work and you can spot the thread that works its way through all of the architecture, and I'm sure that's the same way with your office. And yet many offices, stylistically they're just churning out the same thing, one building after another. So that's interesting.
00;05;26;05 - 00;05;44;00
PN
There definitely is a commitment to modernism and contemporary architecture. We do that well, but we also do historical preservation. And so, we have people who are working on buildings that are hundreds of years old - that occurs too - where we have to tie into historical buildings quite often with the new additions.
00;05;44;02 - 00;05;45;23
DP
So, what is your role in the office?
00;05;45;29 - 00;06;26;00
PN
I'm a senior designer. I lead projects, teams that can be anywhere from just me to four or five architects, depending on the size of the project. And then we have interior design. HGA really is a full-service firm. We have architecture, interior design, mechanical, electrical, plumbing, structural, security, and AV. So, we can do it all, but we often will team up with other architecture firms around the country because we have an expertise that we can bring, which is in this case, museums and archives. So, we'll team up with locals and go after projects together, and that's what we did here in Pennsylvania.
00;06;26;02 - 00;06;30;14
DP
So, are you guys the architects of record or the design architects, or do you switch roles?
00;06;30;20 - 00;06;48;10
PN
Vitetta Architects is the executive architect, and we were the design architect. So, we had the upfront part of the project. We team together. We were always together working together, but we emphasized the front end of the project, and they were construction drawings and CA.
00;06;48;13 - 00;06;53;28
DP
All right, so let's jump into the building here. So, could you tell us a little bit about how your office got the project?
00;06;54;01 - 00;07;52;29
PN
You know, I wasn't there when we went after the project, but it's a typical story, I'm sure, which is there is a proposal out from an owner. They want a building, so they publish a proposal that anybody can submit to. And we looked for someone to team up with locally or they approached us, perhaps the local architect, Vitetta, and we've teamed up as a team and submitted a proposal. And then we were shortlisted, interviewed for it, and we were selected as the team to do it. We had experience doing museums and archives very recently before that, so that made a big impact on our selection.
I think it goes back to 2014 when we were selected for the project there initially was a different site. They went all the way through schematic on a site that was a green site on the edge of town. After schematic, they decided, no, we want to have a site that's closer to our capital complex in town. So, they found a different site and started design over, and that's when I joined the team.
00;07;53;01 - 00;07;59;04
DP
Wow. There's an original archive building, right? And that is done, I think in the brutalist style.
00;07;59;07 - 00;08;40;27
PN
Yeah, you could say that. It doesn't have many windows, so I could see how that would feel Brutalist. It's limestone, however, it's got a concrete structure, but the structure isn't expressed on the outside like you would typically see for brutalist architecture. It's at the Capitol grounds. It's 21 stories tall. And the problem with it is it's a low floor to floor, by today's standards. They considered upgrading it and expanding it, but they determined that the low floor to floor wouldn't allow them to create the updates they need for mechanical systems. Plus, there just wasn't enough space around it to move laterally. So, they decided the thing to do was to find a new site.
00;08;40;29 - 00;08;53;07
DP
So, I'm curious, when they came to you and this was their original building, did they talk at all about style? Clearly the floor heights were an issue. Did they say, “Hey, we don't want to do this again. We want something that's a little more contemporary”?
00;08;53;12 - 00;09;38;12
PN
Good question. Yes, they wanted a contemporary building. They wanted something that reflected today and the way we think about architecture today, which is great. The building that was built originally was a modern building, too. It was of its time. The History Museum is right next to it that will continue to be used. It was great that they wanted to look forward and be progressive about style, and I don't know if we ever talked style per se.
We just had already gone through schematic design. Like I said on this other site with another team. So, I think there was some sort of way of working that had already been established so that when I started on the new site as the lead designer, they had already had some confidence in us and were on board with the way we work.
00;09;38;15 - 00;09;43;13
DP
So, tell us a little bit about the programmatic requirements they came to you guys with.
00;09;43;15 - 00;11;52;13
PN
They wanted a full archive with plenty of space for growth into the future. So, of 146,000 square feet of this building, about 50,000 square feet is the archive storage spaces. The storage has different requirements depending on the kinds of documents it might be worth saying that the Pennsylvania State Archives collects, preserves, and makes available for study the permanently valuable public records of the Commonwealth, with particular attention given to the records of state government.
And as the Archives director, David Carmichael, once said, “they collect everything from parchment to pixels.” As a matter of fact, William Penn, who founded the Commonwealth in 1681, used a charter that gave him the right to establish the Commonwealth. And that charter is at the archives in Pennsylvania and as well as hundreds of millions of other documents that are important to the Commonwealth.
So, we needed to create spaces that allow them to continue to collect. So, it's important the whole process of how documents arrive at the site are brought in, brought into processing rooms, and then eventually put into storage. Quite often they're also photographed so that they can have a digital record of the document and a lot of the people who come in to do research, which is another big part of what they do, they collect and preserve, but they also provide these documents to the public for access, for research or just for curiosity and to learn.
So, there is this whole system of how documents are moving in and how they're being brought to the public to use and then put back into storage. The documents can be anything from large documents in flat files like maps. They can be eight and a half by eleven size. Some of the rooms need to be cool or even cold. So, there are different climates, let's say, in some of these rooms based on the type of media it is. For instance, film that they'll collect needs to be in a very cool environment. So, they have different climates in each space.
00;11;52;16 - 00;12;05;03
DP
Well, that's really interesting. So, let's go back a little bit. Tell us a little bit about the site. Are there any unique topographic features? Is it completely flat? Was it a pretty simple thing to put a building on it?
00;12;05;05 - 00;13;08;18
PN
Yeah, it's a three-acre site and there are two main streets on the west and east side. Sixth Street on the west is about one story above Seventh Street, which is on the East. And Seventh Street is a main feeder artery that comes into town, while sixth is more of a residential neighborhood or semi commercial residential. So, we put the public entry on Sixth Street, which is up a level which means of the four level building, there's a lower level that's a walk out, let's say on the east side.
And then the public enters on what we call first floor, which is one level up from the lower level. The site is also L-shaped, which sounds like it could be a problem, but it really isn't because it's a large enough site that it provides for the building and public space. So, we were able to create a nice plaza out front and lots of landscaping in front of the building to provide a public amenity, let's say, to the people who live in the community and anyone who's visiting.
00;13;08;21 - 00;13;11;23
DP
Did you guys have any challenging restrictions, in terms of zoning?
00;13;11;26 - 00;14;22;26
PN
There were challenges with infrastructure. We had some issues needing to connect the archive with the state capital complex with fiber optics. So, there was a fiber optic line that had to come underground all the way to our site and that was done on a different contract. But we also had a lot of flexibility. For instance, there were streetlights and so on around the site and in some cases, especially on the front where we met the public, we were able to move the streetlights across the street from us because we just didn't think it would be nice having all the lights and lines right out in front of the building.
So, there was some infrastructural work that was done more on a urban scale level to help accommodate this building. Also add that at the same time that we were doing this building, there was a federal courthouse being put in, which is just about completed now too, at the same time. So, these two large buildings that are within a couple of blocks from each other going in at the same time was interesting.
And we actually worked – we had one meeting with the local architect, the design architects of that building, so that we could coordinate a little bit on what some of the public lighting would look like.
00;14;22;28 - 00;14;44;05
DP
The building stylistically, you've got this large glass atrium space and you've got this metal framed armature that wraps that. And then I'm assuming going off in the other direction, you've got a very large block that is made out of masonry. Is that correct?
00;14;44;07 - 00;16;25;19
PN
That's right. We took that stated purpose, the mission statement of the archive, which is the archive collects, preserves, and makes available for study. We took those three ideas, and we turned them into form and gave each form its own material. So, for instance, “collects” is the storage of the archives. That became a form that you just described as masonry.
They preserve, and mechanical systems are an important part of preservation. We have the unique situation of all of the mechanical systems needing to be off to the side of the archive that couldn't be on top of the archive because we couldn't risk any sort of liquids leaking out of mechanical systems into the archives. So, all of the mechanical systems are in their own bay off to the side. That's the preservation part. And we use metal panels to describe that bay.
And then finally, “making available to the public,” there was a public element of it, and in this case, we made it a glass pavilion and we used an aluminum extruded solar shade custom made to protect people from direct sunlight but provide lots of daylight. So, it's very open, very visible. You drive by it on Sixth Street and great views in and out to the street and from the road in. But it's got its own expression from the other elements. And so those three elements look very different from each other. They each really have a different personality, but they're all neutral in color. They're grays from white to medium gray, nothing - it's a very tight range of neutral tones.
00;16;25;23 - 00;16;35;09
DP
Yeah, for a storage facility, it's pretty welcoming. The elevation with the glass and this metal armature is really quite lovely.
00;16;35;15 - 00;16;36;07
PN
Thank you.
00;16;36;10 - 00;16;51;15
DP
So, I saw some really interesting studies in your emails back and forth with Glen-Gery in regard to the colors that you ultimately chose for the facades. There's really a lot there. Could you tell us a little bit about that?
00;16;51;17 - 00;20;13;16
PN
That's a great part of the story. We knew that the archive wing would be enveloped by a long expanse of wall. Archives don't want to have windows, so there were not going to be many windows and this building was going to be up to four stories tall. So, we wanted to make sure that what we put on the building would be something that would be out of the ordinary. And we didn't have the budget for limestone. The Capitol complex is limestone. The original building was that way, but we wanted something durable and where we could allude in some way to what was going on at the Capitol. We thought brick is durable. It's a good candidate for an archive because of that, and we wanted to make some connection to the limestone.
We began looking for a light-colored brick, very neutral, something that could echo that limestone. But clay doesn't come in neutrals like we wanted it. You know, Clay typically is in the Browns, yellow reds. You can get it to be black or very close to black. But everything we found seemed to be a little bit too warm. The closest we could get was a very light-yellow brick, and even then, it just felt a little too warm. So, we started considering clay slip coatings that are available on the market for bricks that could be applied to the brick to get a lighter and more neutral look. And that's when we came across Glen-Gery. We found some buildings on the Internet that traced us back to Glen-Gery. I don't remember how, but we were able to find them. And then Glen-Gery could make custom colors in the matte, but they also could make glossy glazed finishes. So that's when we started to consider that. And from there we began a conversation with them about brick colors and finishes.
Eventually I took a trip to their plant up in northern Pennsylvania. One time I landed in Pittsburgh, rented a car, drove up to their plant, and then from there I went to a client meeting in Harrisburg. It was really a fun visit just to see that plant work and meet with the artist. They had like an artist lab or chem lab where they can mix custom colors. And we had really good conversations and that really convinced me that this had a lot of potential. It wasn't a shoe in, it wasn't sure yet that we could go this route, but I just felt like there was a path to get there.
And eventually we went the route of glazed brick over the matte finish. We found the shine and reflectance of the wall surface potentially very appealing, especially on a large building with so few windows. Second, there was a side benefit with the glazed brick, and we believe that it would help resist graffiti and make it easier to clean because we were in an area where graffiti could be an issue. So that was another selling point for going that direction. It certainly worked in terms of getting the state to back that idea of going with a glazed brick, because I think it just seemed very unusual that a building would be entirely covered with glazed brick, and it helped that we were using very subdued colors like grays. We have five colors. It's a range of grays. And when you stand back, they kind of blend together. It creates what I like to call a heathered look. You know, if this were a knit sweater, it would be using heathered gray yarn and it kind of all blends together.
00;20;13;16 - 00;20;22;16
DP
Well, when the bricks glaze, does it reflect images or light or is there anything special about the facade when you stand back and look at it, other than the color?
00;20;22;23 - 00;20;51;12
PN
In a surprising way, that was very pleasant, once it got put up – especially on that north side where it's a long wall of brick – we were really surprised and pleased to see that on a cloudy day as the clouds are going over, it reflects the sky and the clouds, enough really to - it's not like a mirror, but it gives you a nice feeling that this building is somehow relating to the sky. So we really like that part of it.
00;20;51;14 - 00;21;01;19
DP
It all sounds really cool. Before we wrap this part of the conversation up, tell me about the mockups you guys did for the colors of the brick. They're really cool. It was a great idea.
00;21;01;22 - 00;22;22;18
PN
Yeah. Thanks. We started just by getting Sherwin-Williams paint chips. They make eight by ten paint samples. We pulled out a whole bunch of neutral colors with little bits of warm and cool associated with them and had them sent to us. Then we took the ones that we found most appealing, and we created a brick shape with using chipboard, glued them down, and then we started to assemble different quantities and proportions of different colors and just started mixing things until we saw something that looked appealing.
So, we created this mockup model where we could try different proportions. We kept records of how many of this color, how many of that on each set up that we did. And we created a whole series of these that we could first show ourselves and figure out which ones we liked the best. And then we took them to the client and showed them to them and tried to find where the sweet spot was for this blend.
From there we started to work with Glen-Gery to actually come up with samples, glazed brick samples. They weren't full bricks right away. They were just pieces of clay, small, maybe four by three inches, for starters, until we could come up with something closer to the actual colors we'd want to consider.
00;22;22;21 - 00;22;45;28
DP
You know, what's so surprising to me is you take five colors, put them together on a board. You've got 30 or 40 bricks. Each one of these samples, you stand back, and you look at, I'm just blown away that you can do that on a facade, and it never looks busy. You stand back and it becomes like another color. It becomes the color in-between all the colors. How did you even know that was going to happen?
00;22;46;00 - 00;23;31;00
PN
That's a good question. You're digging into the way we had to think about this. You know, some of our mockups had more contrast. Some of them had less contrast. And I think you need to find that point where the contrast is enough to give some variety and not make it look homogenous. But you don't want it to be so contrasty that it starts to look speckled. We didn't want to speckled looking, building, so it was just a matter of setting things up, looking at them close and then walking away and looking at them from, you know, 100 feet away and just see how well they blend together. It's like pixels, right, on your computer. These were really just physical pixels. And the farther you get back, the more they blend.
00;23;31;03 - 00;23;47;29
DP
So, at the end of the day, when you guys were all done with the job, was there anything that you learned that was really interesting about the design or the construction process? Again, as an aside, being the designer architects, it's got to be interesting handing a job over and then coming back to it as it nears completion, right?
00;23;48;01 - 00;24;39;20
PN
Yeah. And fortunately, we had a great working relationship with Vitetta, Daniel Wasik, the architect who led the team at Vitetta, who did a wonderful job. We had a good relationship and all the way through construction drawings, we were actively reviewing the drawings with them and participating in meetings. They were leading that process at that point from there on out but we were still involved. And even during construction administration, I didn't get to go to the site until late in the game. However, we were getting pictures from them monthly, lots of pictures. They were really good about it. They would tell us if there were any issues, we'd work it through together. So, it really worked well. And I have to say, I've never worked with a local architect that well before. It was a wonderful relationship and I’d love to work with them again sometime.
00;24;39;23 - 00;24;43;03
DP
That's really cool. Did the GC have any trouble finding a good mason?
00;24;43;10 - 00;24;45;05
PN
I know that there were issues.
00;24;45;05 - 00;24;47;11
DP
It's always an issue.
00;24;47;14 - 00;25;23;03
PN
Yeah. I mean, when I look at the building, it was well done overall.
You know, we had some complicated pieces to it too. For instance, we had an overhang at the front entry with brick hanging ten feet out, cantilever out over the entryway, and we designed it so that the brick at the bottom was not supported by an angle. We hid the structure and hung those two courses at the bottom from a structure up inside the wall. So, we were able to glaze even the underside of the brick hanging out over that cantilever, which wasn't an easy thing to accomplish.
00;25;23;03 - 00;25;24;17
DP
Yeah, it sounds expensive.
00;25;24;23 - 00;25;44;28
PN
It was, but it's a state building and you want it to be done right, and further, I don't know if you've had this experience on your work, but I've gone back to visit buildings sometimes that are years old, ten years old maybe, and some of those angles that support brick can start to rust. So, we wanted to avoid having that happen on a building this important.
00;25;45;00 - 00;26;04;20
DP
Yeah. And you know, you're going to make a few statements in the architecture and that's one really big one right at the front of the building. Very cool. So, before you go, you've been at this for 30 years or so. If you could give yourself – your younger self some career advice, what would it be?
00;26;04;22 - 00;26;49;17
PN
Oh, boy. Well, I do meet with mentees – we have a mentorship program here at HGA, which is highly valued by the people who are just starting out in their careers. And sometimes what I'll tell them is try to pay attention to everything you do, even the details. And not just focus on the big picture because the more you can know about the way buildings are specifically put together, the more you can understand about the structure and the other disciplines, the better you can be at making those decisions and choices at the beginning of your project. And so, I always encourage architects, especially people who are interested in being designers, to learn every aspect of the project down to the details.
00;26;49;20 - 00;26;56;24
DP
Yeah, if you're not interested in being a lifelong learner, architecture may not be the right profession for you.
00;26;56;26 - 00;26;57;16
PN
That's true.
00;26;57;16 - 00;26;59;28
DP
Right? You're always learning something.
00;27;00;06 - 00;27;01;08
PN
I'm still learning.
00;27;01;12 - 00;27;08;25
DP
Oh, yeah, I am too. Every day. So, Paul, it's been great to have you here. Thanks for your time. Where can people go to learn more about HGA architects?
00;27;08;25 - 00;27;18;15
PN
They would go to hga.com, and we've got our projects there that you can look at, and our teams, our people. It's a fun place to go.
TRANSCRIPT
00;27;18;18 - 00;27;21;25
DP
That's great. It sounds like a really interesting place to work.
00;27;22;00 - 00;27;34;05
PN
It is. I really enjoy it. There's a lot of smart people here and I'm so glad that I get to play the role I play. But I also admire those people who play all the other roles that we have at this firm.
00;27;34;08 - 00;27;34;28
DP
That's great, Paul. Thank you.
00;27;35;01 - 00;27;39;18
PN
Thank you. It was a pleasure.
You May Also Be Interested In
We Can Help With Your Next Project
Discover the latest + greatest in design trends, industry news & pro tips from pros.
For all of your project needs, you’ll find everything you need at a Supply Center.
Let Us Know How We Can Help!
Brick Blueprint with DS Architecture
Cleveland, OH
Architecture Firm
DS ArchitectureDirector of Design
Eric F. ProsDistributor
The Thomas Brick CompanyDS Architecture maximizes client involvement, from design conception to the final stages of construction. DS Architecture encourages clients to join the design team by reviewing and approving every major milestone of the architectural process.
When we asked Eric F. Pros, Director of Design at DS Architecture, about his recent project, Lakewood’s Fire Station Number 2, this is what he had to say:
Q: What was your inspiration for this project?
A: We were inspired by the history of the Lakewood Fire Department and the surrounding neighborhood. This project was a renovation and addition to an existing historic fire station in Lakewood, Ohio which is the most densely packed city in Ohio. The existing building’s character was recognized and celebrated while we improvised on its character and introduced innovative new ideas to not only honor the history of the building, but also elevate its identity with some contemporary style.
The urban context of this site was an inspiration. Because land is in high demand in this city, we had to make the most of every bit of the property, while still being a good neighbor. These conditions which initially seemed like restraints were used as helpful parameters for the project and helped us make informed decisions about the building’s placement, scale, massing, and rooflines.
The people that would be the end users of this facility were an inspiration. The first responders have a great deal of pride in their community and are recognized by the neighborhood as a symbol of civic pride. The long, tall façade of the apparatus bay that could have felt imposing or out of scale with the rest of the neighborhood was instead leveraged as an opportunity for public art and innovative wayfinding signage. The flemish bond brick pattern was articulated in a way that gave the field of brick depth through a textured backdrop for a metal sculpture. The corner of the building that faces the roadway received some special brick detailing attention by rotating the stretcher units 30 degrees in a way that formed a block number 2 that is reminiscent of the fire department’s insignia on their vehicles. In this way, a standard off-the-shelf masonry unit was used to create unique dramatic effects.
Q: What was the overall goal, or desired outcome, for this project?
A: The first goal of the project was to upgrade an existing fire station to suit the needs of modern firefighting and emergency medical services. The pre-existing facility did not offer appropriate space for the new fire trucks and did not have adequate bunk space for first responders. As public safety continues to evolve, the way that fire fighters performed their duties 100 years ago is very different from today. The vertical growth of the city has made it necessary to have longer ladder trucks to respond to emergencies that may occur in high rises.
A secondary goal was to give the first responders a facility that they can be proud of. In a similar way, the residents of the City of Lakewood should be proud of the buildings that represent their rich community and the diverse history of their neighborhood.
Q: Why did you choose brick for this project? How important is material to your approach?
A: There are many reasons why brick made sense for this project. There is a sense of symbology for the fire stations to be constructed of brick. Red brick is somewhat synonymous with fire stations and contributes to their iconic presence in communities. “Fireproof” buildings constructed predominantly with masonry became popular and embraced by fire departments.
Because fire stations are public buildings that are occupied 24 hours a day and often maintained by the crew, low maintenance materials, like brick, are preferable. The long-term durability of fired clay masonry products makes them a good investment for such buildings. The longevity of this material ensures that the building will be a building that the City of Lakewood can be proud of for many years to come.
Material choices greatly impact the perception of a building by the public. As a symbol of safety and civic pride, this fire station needs to evoke a sense of stability and permanence. Glen-Gery brick effectively communicates these ideas in a way that not only fits into its historic context but suggests a long-lasting presence.
Q: What interested you most while designing this project?
A: The people that would be using this building 24 hours a day, 7 days a week are really what this project kept coming back to. Providing a sense of dignity for the first responders that keep the City of Lakewood safe are what this project is all about.
The ability to collaborate with local artist Scott Goss on his metal sculpture installation was truly an honor. The building itself is focused on many of the practical considerations for a fire department, but Scott’s “Shielded Together” installation takes the building a step further and truly pays tribute to the men and women who have dedicated their lives to service. The metal sculpture is highly visible and is lit at night so that it can be appreciated around the clock.
Q: What features of brick are most important to you? What made you choose Glen-Gery?
A: Each project is unique, and every masonry application presents opportunities for innovation. In this project, finding a brick that matched the historic color and texture was our first challenge. Thankfully, Glen-Gery’s robust catalog of clay colors and textures allowed us to have several options to consider that were very close to the original brick from 1919, and the later addition. We were fortunate enough to test several sample panels in natural light next to the existing brick to see which option would give us the best match. Our final selection was Wavetex Red Bark. This brick perfectly complements the existing brick from a century ago. Additionally, because we were using brick in some unique ways with multiple faces exposed to the exterior, finding the right texture that would receive light correctly was critical to the success of the project.
The quality that Glen-Gery provides is an additional reason for our selection. The long-term endurance of the material gives the owners of the building a particular level of comfort because masonry is known for its resilience. On the design side of the equation, the brick’s quality is an added benefit.
Q: What made this design process different from others you have worked on?
A: This project presented several challenges, and seemingly limited opportunities for innovative solutions. A collaborative design process with the client and our team helped to streamline the design process and established goals. Where our innovation came into play was in how we treated the material and the installation that made this project truly unique.
Special care was given during the design phase to enable the project to be built while the facility can serve its primary purpose of serving the community. It’s not uncommon for public buildings to remain operational while a capital improvement project is underway, but this project proved to be more challenging since there was minimal extra space on site. The builders worked diligently to keep the construction from interfering with the spaces needed for the firefighters to perform their duties.
Q: How did you utilize the International Masonry Institute (IMI) for this project, and what was your experience like?
A: The IMI is an incredible resource for designers and contractors. They provide technical expertise on proper masonry detailing and installation and advice on unique designs. The Ohio Regional Director is Tom Elliott, and I owe him a great deal of gratitude for his knowledge and dedication to masonry design over the years. The IMI partners with local BAC training centers to provide hands on training for masonry apprentices and continued educational opportunities for skilled craftworkers.
Once we had developed a design, I reached out to Tom to get his feedback on our concept. We reviewed the details together and decided this project could benefit from a full-scale mockup. I generated some drawings of the brick detail that we were working on that not only showed the detail in elevation and isometrics, but also a course-by-course series of plans that allowed the craftworkers the ability to easily understand the design intent at each course. The bricklayers knew exactly which units needed to be solid or cored, and which ones were to be rotated 30 degrees. Although we shrunk the overall scale of the detail down vertically for safety reasons in the training center, the intent of the design was appreciated.
Q: What is a typical timeline for a project of this scale?
A: The scope of this project was well defined from the beginning which allowed us to streamline the process into 2 distinct phases. This scope of work also allowed the contractors to construct the project while keeping the station fully operational during construction with limited interruptions to their service. The design timeline was approximately 8 months with the construction duration taking nearly 12 months due to the unique phasing of the project and sensitivity to keeping the facility operational.
Q: Has this project won any awards?
A: The Lakewood Fire Station Number 2 was recognized in the 2022 JBC Masonry Innovation Competition through the International Masonry Institute (IMI).
You May Also Be Interested In
We Can Help With Your Next Project
Discover the latest + greatest in design trends, industry news & pro tips from pros.
For all of your project needs, you’ll find everything you need at a Supply Center.
Let Us Know How We Can Help!
Brick Blueprint with STAT Architecture
New York, NY
Architecture Firm
STAT ArchitecturePrincipal
Suzanna TharianProject Manager
Carina NaulaProducts
Ebonite Smooth, Glacier Gray WesternThe goal of STAT Architecture is to provide quality architecture services by understanding client needs, working with budgets, and adhering to deadlines, while providing reliable services. Their focus and expertise lies in new construction projects and the gut rehabilitation of existing buildings. With services that extend through all aspects of the design and construction process, STAT Architecture prefers to work with projects from the inception of the design right through construction completion.
When we asked Suzanna and Carina about their recent project, Soundview Townhomes, this is what they had to say:
Q: What was your inspiration for this project?
A: Soundview Townhomes are located in the Bronx, across from Soundview Park, which opens to the Bronx River. We wanted our architecture to celebrate this unique park frontage, formalizing it with elegant townhomes and maximizing pedestrian access to the park. We looked to the tradition of garden and cooperative apartments in the Bronx and Queens as a point of reference. These building traditions sought to provide equitable and affordable access to light, air, and green space by proposing low-rise units adjacent to parks or gardens. In this vein, we were looking at the affordable housing built by Andrew J. Thomas in the 1930s, but also projects of a more modest scale, like the Regional Planning Association’s Sunnyside Garden. I should note that all these projects, building conventions, and typologies we referenced during design are brick buildings.
Q: What was the overall goal, or desired outcome, for this project? Why?
A: Site for this project is a former parking lot on a NYCHA property. Relatedly, our goal with this project is to replace an automobile infrastructure with a pedestrian infrastructure. The production of street friendly space has a lot to do with the subtleties of façade design. Layout questions—e.g. How far from the street? Where to place entrances? What rhythm and height for windows?—tend to dominate. However, materials tend to best convey care. So, when we selected our façade materials, we really sought proud, durable, stand-out materials to make this project a good neighbor to the Soundview community.
Q: Why did you choose brick for this project? How important is material to your approach?
A: Clients, neighbors, preservationists all seem to like brick best. Brick converses easily with New York’s historic fabric and the local authorities in the Bronx were also very keen on brick. Building practices are an evolving set of conventions. Buildings aren’t made the way they used to be, but neither are bricks. Buildings and aesthetics evolve in parallel conversations between builders, producers, designers, and the public. Our office has been working for 20 years with Sal Pate at Consolidated Brick. From Sal, we learn not just the cost of various bricks, but where and how they were made. All these aspects are important to us as designers. The manufacturing processes and location tell us about the embodied carbon cost of the materials we choose, while finish and color communicate contextuality and care.
Q: What features of brick are most important to you? What made you choose Glen-Gery?
A: For any material, our first priority is due diligence regarding its health and carbon cost. When it comes to aesthetics, the biggest differentiator is the finish texture. Some bricks can look clay-like and awkward, but we’ve had a lot of good experiences with Glen-Gery. It’s a reliable and attractive brick. Your team is very skilled at emulating the molded brick look that gives a project that majestic old New York feeling we all look for.
Q: Why did you select Sioux City product?
A: To be honest: color. We pick out bricks in person. We browse the showroom, pull things we like and put them all up on the wall. Ebonite smooth literally sparkled. We needed an attractive base; ebonite was an easy choice. We choose to complement it with glacier gray which is buff brick speckled with blues and creams.
You May Also Be Interested In
We Can Help With Your Next Project
Discover the latest + greatest in design trends, industry news & pro tips from pros.
For all of your project needs, you’ll find everything you need at a Supply Center.
Let Us Know How We Can Help!
Brick Blueprint with Architecture Plus Information
New York, NY
A+I is a New York based strategy-driven architecture and design agency focused on the future of work.
The name stems from Architecture + Information and encapsulates the firm’s investigative approach and creative curiosity. A+I was founded in 1996 by Brad Zizmor and Dag Folger who met at Columbia University. At the time, the blossoming dot-com era spotlighted architecture’s ability to push the boundaries of workplace design and meet the evolving needs of its workers. Since then, A+I has grown to be an internationally renowned firm with a diverse practice that encompasses branding, strategy, design, and architecture, specializing in workplace, retail and development projects.
A+I is recognized for its thought leadership in workplace strategy and design, its award-winning projects, and its meticulous, research-based designs. Recently completed projects include the Headquarters for Le Truc (part of Publicis Groupe), Peloton, Squarespace, Equinox, and Hines, as well as the elevated repositioning of theMART and PENN 1 for Vornado Realty Trust, and ‘The Gardens’ at 780 3rd for Nuveen Real Estate.
Q: What was your inspiration for the Peloton Headquarters?
A: Our greatest inspiration was the community of creators we met at Peloton, and their collective mission to support and empower their members. They aspired for their workplace environment to be egalitarian and of the highest quality, giving everyone throughout the organization equal treatment. That ambition informed the creative direction for the project and served as an anchor for design decisions. As a result, central to the design was the idea of a shared experience – one of connectivity and community.
Q: What was the overall goal, or desired outcome, for this project?
A: Our goal was to support every creator uniquely and equally, while maintaining perspective on the collective mission. We met and interviewed a wide range of creators with diverse workplace needs who were united by a commitment to a shared vision, and we wanted to support and celebrate that commitment.
Q: Why did you choose brick for this project? How important is material to your approach?
A: We chose brick after a thorough material research phase for a central “spine” wall that connects every floor of the project through a shared open space. We needed a material that would be constructed through aggregation, a process in which countless individual elements are combined to create an effect greater than its parts. In this way, the wall became an embodiment of our architectural mission.
Q: What interested you most while designing this project?
A: We spent a lot of time engineering a system for the brick wall that could achieve the complex stacking and rotating pattern we designed. This pattern was developed in response to Peloton’s branding collateral, which uses similar gradient patterns to express dynamic movement, appropriate for this active and stacked space.
Q: What features of brick are most important to you? What made you choose Glen-Gery?
A: In addition to its construction logic, we chose Livenza Raw for its tactile qualities and variation in color and texture. For the desired effect to be achieved, each individual unit in the wall needed to have a distinct and “handmade” quality that set it apart.
Q: What made this design process different from others you have worked on?
A: Because of the complexity inherent in the design, there was a lot of back and forth between the overall design intent of the wall and the details built into each brick. This feedback loop between scales is different from other materials and led to the success of the end result.
Q: What is a typical timeline for a project of this scale?
A: For a project of this scale, the timeline varies greatly depending on a number of factors, from the extent of the strategic interrogation to the complexity of the design. A+I carefully designs the approach and schedule for a project based on our client’s unique needs and desires. On average, a project of this kind takes approx. 18-24 months.
Q: Has this project won any awards?
A: SARA National Design Awards 2022, Fitwel Impact Award 2022 (“Highest Scoring Project of All Time”)
Project Team
Phil Ward, Peter Knutson, Sohee Moon, Chris Shelley, Hannah Lee, Vané Broussard, Nico Martin, Maria Lozano, Anjali Patel, Catalina Rivera, Jara Mira, Josipa Baricevic, Katherine Salamat
You May Also Be Interested In
We Can Help With Your Next Project
Discover the latest + greatest in design trends, industry news & pro tips from pros.
For all of your project needs, you’ll find everything you need at a Supply Center.
Let Us Know How We Can Help!
Ebonite Smooth, Glacier Gray Western