TRANSCRIPT

 

00;00;00;02 - 00;00;05;12

Doug Pat (DP)

Let's go inside the vault. The design vault.

 

00;00;05;14 - 00;00;30;13

Peter Miller (PM)

Gentrification is always an issue in New York City, and trying to deal with that in a responsible way as an architect is something we often think about. Some people, you know, have a problem with larger buildings, but we're not talking about towers. The most bulk is on avenue is where I think people are a bit more comfortable. And because we're bringing residential into the neighborhood, that's usually something that's appreciated.

 

Everyone in New York believes rents and housing prices are too high and we need a greater supply.

 

00;00;30;18 - 00;01;00;18

DP

This is my guest, Peter Miller. I'll share more about him shortly. In this episode from the Design Vault we highlight Peter's project 625 Rogers Avenue. 625 Rogers Avenue is the site for a new mixed-use building with a primary use of residential ground level, commercial and community facility uses with a below grade enclosed parking lot. The architectural design for the building divides the overall mass into two distinct volumes a lower and upper.

 

The lower is a rectilinear form that relates to historic buildings in the area. This volume is meant to create a more contextual streetscape and a friendly residential feel. In contrast, the higher recessed form is articulated to relate to the new character of the neighborhood. It steps back and recedes as it rises, making it more private and less visible from the street.

 

The lower form is brick, the upper is stucco, the lower is dark, the upper is light. A side yard is included along the south elevation for more daylight glass and a restaurant terrace. Hi, I'm Doug Pat, and this is Design Vault. Peter Miller is a partner of Palatte Architecture, which he co-founded in 2010. He holds a B.S. in architecture from Washington University in Saint Louis and a master's degree from the Graduate School of Architecture, Planning and Preservation at Columbia University.

 

Peter is a director of the Executive Board of AIA New York and a Design for Freedom Working Group member. He's a registered architect with 20 plus years of experience focusing on designing and implementing innovative building systems and components. His notable projects include Grace Farms in New Canaan, Connecticut, The National World War Two Museum in New Orleans, The Revitalization of Forest Park in Saint Louis, the Confluence Masterplan of Missouri and NYC HPD's Small Lots Development Program.

 

Peter's work has won many design awards, including several AIA National Honors Awards and the Mies Crown Hall America's Prize. His work has been featured in Architectural Record, Elder Corps, Fast Company, The Wall Street Journal and The New York Times. He's originally from rural Indiana and is from a family of craftsmen, engineers, entrepreneurs and tinkerers. He treasures the creative process of turning ideas into physical form.

 

So welcome, Peter. It's nice to have you with us today. So tell us a little bit about Palatte Architecture in New York City. So it was founded in 2010. Where are you guys located In the city. What's the size of the firm? What type of work do you do?

 

00;03;17;08 - 00;04;01;09

PM

So we're located in the, I like to say the Union Square area. We're on 16th Street and Sixth Avenue. We are 11 people in total, three partners and eight architects. The work that we primarily do is residential in nature. It spans from multifamily, residential in the mid-sized range. 50 dwellings is probably an average size for a mid-sized development to custom residential townhouse projects within the city and custom houses ground up outside of the city.

 

In addition to the residential work, we do a variety of other things early education is a big part of what we do. Preschools, daycares, things of that nature, and some other commercial projects spanning from retail to restaurants.

 

00;04;01;12 - 00;04;02;08

DP

How's business?

 

00;04;02;14 - 00;04;30;04

PM

Businesses up and down. You know, when you own your own business, it's always a rollercoaster. I would say we're busy. There is a lot of work being constructed right now. We have a lot of projects in construction. Design work continues to come in. It's not quite as strong as it was a year ago. I think interest rates are affecting particularly the custom residential side of our business, but the multifamily business continues to be booming. We stay busy.

 

00;04;30;07 - 00;04;31;28

DP

Has the firm grown?

 

00;04;32;01 - 00;04;52;08

PM

We try very hard to stay the same size. We have a team of people that we really like and we trust them. And I think a big part of who we are is the consistency within our office. So when times get slow, we find ways to keep those people productive, and when times are busy, they go the extra mile for us and they put in the extra work.

 

00;04;52;10 - 00;04;59;17

DP

So tell us a little bit about yourself. So how long have you been practicing and what's your role in the office as a partner?

 

00;04;59;20 - 00;06;10;10

PM

So I've been practicing since early 2000s. I attended Columbia University for graduate school and finished in 2006 and spent a better part of a decade working for well-known firms, doing international projects, particularly of like museums and high end residential. We formed Palatte Architecture. I had two business partners, John Sunwoo and Jeff Wanders, and then we met at Columbia in studio, and there was always an idea that we wanted to work together.

 

It took a while. We had our own careers in other firms for a while and came back together and formed the office in 2010, but it took a little while to get off the ground. Within the firm my role is partner. We are fairly equal. It's one of our core elements at Pallet architecture, the three partners. We have complementary skills, but we all can perform anything within the office.

 

Projects are organized where each partner is in charge of one, and then beyond that, we have some other roles. One of my roles is sort of business management and human resources, so I do that in addition to all the design work, the construction administration.

 

00;06;10;09 - 00;06;15;17

DP

All right, so let's dig in here and talk about 625 Rogers Avenue. So how did your office get the project?

 

00;06;15;19 - 00;07;07;25

PM

So this is with a client we've been working with for a while is a little bit of background on Palette Architecture. We really started this firm fairly early in our careers. As such, we didn't have as many connections. A lot of things started out as they do in sort of those classic ideas of architecture. You're doing somebody's bathroom, somebody's kitchen, and then you do a good job and you end up doing their house and eventually you work your way up.

 

So it's been that way. We met this client when we were doing a lot of houses and they were looking to turn a house into a residential building, a multifamily four. So it was to turn like a big townhouse into a four family. And so we did that project for them and we built a relationship that's led to, I think, ten different projects with them now.

 

And this is the latest one. And so they've grown in scale each time. And this one's, I think, 25 units.

 

00;07;08;02 - 00;07;14;29

DP

The project is considerable size. So give us a little history of the location and what was there prior.

 

00;07;15;01 - 00;08;17;11

PM

This is in the Prospect Lefferts neighborhood of Brooklyn. So that is on the northeast side of Prospect Park. We've done a number of projects in this area. The site before this was largely vacant, there was a couple of dilapidated houses in that area. It was mostly a small demo and clearing the project is near the corner of Parkside and Rogers Avenue.

 

Rogers is the major thoroughfare through the Prospect Lefferts neighborhood. We do not have the actual corner lot, which was kind of an unusual situation in terms of design. There is a small brick building on the corner that has a bodega in the ground floor. Adjacent to them there was an easement in place for them to have access to the back of their building.

 

So we have a minimum of eight feet that we needed to keep open between us in their building. So we ended up with a building that had two facades, even though it wasn't on a corner because of the easement.

 

00;08;17;13 - 00;08;22;24

DP

So tell me a little bit about the scope of the project and the client's programmatic requirements.

 

00;08;22;26 - 00;09;08;03

PM

So the scope of the project is largely multi-family residential. As with any case, working with a developer, you know, it's maximizing units and floor area for the residential use. However, because it's on Rogers Avenue, which is a major thoroughfare, there was an overlay for commercial. So there was a desire to try to put as much commercial in here as was viable in terms of sales. On the ground floor we have two commercial spaces. One is designed to be a restaurant and the other is a bit more flexible, likely to be more of a retail establishment. And then in addition, there is a small community facility space on the ground floor. There is a lobby also on the ground floor that leads up to the residential spaces. And there is five floors, two through six, that is residential apartments above.

 

00;09;08;05 - 00;09;12;03

DP

So building plan. Could you describe that on the site shape?

 

 

00;09;12;05 - 00;09;27;04

PM

Yeah. So it's L-shaped, I would say, with one of the major legs being across Rogers Avenue and the other leg running parallel to this easement that I mentioned before. And then there is a courtyard in the back portion of the L.

 

00;09;27;06 - 00;09;33;10

DP

So project restrictions, zoning codes. What were you guys dealing with out there other than the easement?

 

00;09;33;12 - 00;10;21;05

PM

One of the things that has generated a lot of our work in Prospect Lefferts Gardens is there was a zoning change probably about a decade ago that allowed for larger bulk in the area. So a lot of the buildings along Rogers Avenue and in other parts of the neighborhood, are suddenly getting a lot bigger. And in some cases you're seeing full tear downs.

 

In some cases you're seeing vertical enlargements. In our case, it was important to have this contextual approach that some of the smaller buildings were going to remain for decades and others were going to instantly become larger. So we wanted something the span between those. That meant having a form that followed the context of those smaller buildings. So it's larger up to a setback, and then it sets back at the height of our neighbors and then becomes something a bit more fanciful above.

 

00;10;21;07 - 00;10;28;09

DP

I'm thinking about the neighbors, right? And I'm thinking about the neighborhood. And you said these buildings are getting bigger. Is that driving anybody crazy?

 

00;10;28;12 - 00;11;09;05

PM

Oh, certainly. It's a mixed neighborhood and gentrification is always an issue in New York City. And trying to deal with that in a responsible way as an architect is something we often think about. And it's certainly an issue in this neighborhood as well. Some people, you know, have a problem with larger buildings, but we're not talking about towers.

 

The bulk has risen from like four stories to six or seven stories. So it's a bit bigger. The most bulk is on avenues where I think people are a bit more comfortable with it. And because we're bringing residential into the neighborhood, that's usually something that's appreciated. Everyone in New York believes rents and housing prices are too high and that we need a greater supply. So there isn't a lot of tension, I think, on that.

 

00;11;09;08 - 00;11;17;22

DP

What is the city do in terms of review, esthetics and building height? Is there an open meeting and you guys are just about to go into construction?

 

00;11;17;29 - 00;13;21;19

PM

We are in construction. We've been in construction for almost a year. The superstructure is in place. A lot of the interiors are framed out and the building is fully enclosed. At this point, we are about to clad the exterior, so we're pretty far along in construction in terms of the city's take on the shape and the zoning of the building.

 

New York City is fairly as of right city. If you are following the zoning code, zoning text in the building code, you can largely do what you want, but it is fairly constrained, especially if you want to maximize the floor area, maximize the amount of units. So you often find yourself into these rectilinear envelopes if you're trying to maximize, but there's room for play.

 

And I think that's really what we were trying to do with this lower mass, is to build that out, make it very tight and taut and follow the context of the neighborhood. It was a bit more challenging on our site because we also had to deal with this easement. And so the easement is a whole swath of the property that you can't use.

 

You're probably aware, but in New York City, the amount that you can build is a factor of the lot size. So the larger the lot, the more you can build. However, if you're not allowed to build on a portion of the lot, then that same amount of area has to fit into a smaller envelope and so it gets tight.

 

That's kind of what led to the L-shape, is that we couldn't simply do it in a bar building across the main avenue. We had to put some sort of extension on to the back. But we were fortunate that that extension could follow the easement. So we get a lot of natural light and air from that. It's not legal light and air, which I think people from New York will be familiar with, which is something is a requirement for all apartments.

 

But we were able to get that through our courtyard and through our rear exposure. And so this was really like bonus windows and bonus light and air that we could get because of the easement. In addition, this corner building is quite a bit smaller, so we are afforded a lot of wonderful views over the top of it.

 

00;13;21;21 - 00;13;37;24

DP

So tell us a little bit about the design process. I just typed in 625 Rogers Avenue and there's a nice website that comes up and there are some great three dimensional images there that tell me a little bit about the design process. How does that work in your office and how long did it take for this project?

 

 

00;13;37;27 - 00;14;19;02

PM

The design process is usually quite rapid in New York City. I would say the actual meat of the process, which is kind of something that a lot of times you learn in school, you spend some time, you make some models, try out a few renderings and you come up with something and then you say, Well, we're not going to do this part.

 

Let's change it like that. That part of like coming to a form and a floor plan was probably an 8 to 10 week process. And then, of course, there's many stages after that coordinating with structure and mechanical and doing all the fine details and then that sort of thing, Then that's probably another couple of months.

 

00;14;19;04 - 00;14;21;21

DP

So were the clients excited about the project?

 

00;14;21;23 - 00;16;41;07

PM

Yes, they do value design a lot and so they were quite excited about it. I think there was always a question of how were we going to deal with this easement? And I think they were very excited about this idea of this lower box that is contextual. We weren't formally contextual. I think that's also probably important to mention.

 

It is a black brick, so it's not your traditional New York red brick or yellow brick that you might find in there. It is a black brick, so it is meant to pop a bit. What was important to us as a firm was to make something that was formally contextual, didn't look bigger than the neighbors didn't look imposing.

 

We're not interested in a building that like sticks out like a sore thumb. I think a lot of architects think that you need to make something flashy in order to be noticed, and then for people to come and want you to design another flashy thing that wasn't necessarily what we were after. We wanted something that had a calm facade to it and felt a bit like the neighborhood.

 

But this isn't the early 1900s, like the context was built in, so we can't do exactly that. So we were looking for something that was formally similar but materially different. And so we went with this black brick along the lower volume. And then of course we had more area to use and we had to put it somewhere. So we set it back and we gave it more articulation.

 

 

It's a bit of push and pull of rectangular volumes above, but it's a very light color and the idea was always to be set back enough to where it wasn't initially visible. It was more of a second look sort of thing that when you see the building, you're like, Oh, that feels like the size of other buildings in the neighborhood.

 

And then when you look a second time, you’re like actually it is not. And what's going on up above is really articulated and interesting. And why did they do this sort of thing? And the reason why we did a lot of that on the upper volume was to create outdoor spaces. This was a project that was conceived during the pandemic and then finalized throughout that process.

 

There was a lot of interest in our office about making outdoor spaces, particularly private outdoor spaces, beyond the size of balconies, spaces that were more of room size so that you could actually spend time outside with others and you could work outside when the weather is good. So a lot of the articulation on this upper volume was about trying to create private outdoor spaces for each of the interior units.

 

00;16;41;10 - 00;16;45;07

DP

So were there any unique construction details throughout the project?

 

00;16;45;09 - 00;18;20;15

PM

Certainly. And we are talking about brick, I'm sure, today. So I think that has a lot to do with it. We've been finding that thin brick has been really advantageous to us throughout the process. New York City is all about every inch. Every inch matters. Real estate agents will tell you that. So the thin brick does afford us a thinner wall thickness, which allows every unit to be a little bit bigger, the sales area to be a little bit bigger.

 

So that's something we'd like to do. But what we found great about the true brick system, which is what we used, is that it's a mechanically fastened thin brick which affords us new types of details. When you see the classical full brick, you can do corbelling, you can have some bricks, project out from others to create shadow lines and other types of articulation, which wasn't initially available in thin brick because everything just had to sit inside of a tray and anything that projected out would become too much of a load and either pop out.

 

And so what we were really excited about with this thin brick system, the true bricks, is that we could have a variety of brick depths while still saving these inches. And so there was a lot of thought about that in terms of details. We used different depths of thin brick to articulate slab edges and also areas of pattern and texture.

 

So within this brick volume on the base, there are strip windows. In between each strip window. We do have a textured brick that creates a bit of interest. It creates a patterned shadow on the facade, and then that is all captured in between these sort of expressed slab edges.

 

00;18;20;17 - 00;18;24;29

DP

So could you go through a wall section for me? Exterior to interior.?

 

00;18;25;01 -  00;19;29;12

PM

So we have on the exterior a variety of different depth thin bricks that snap into the true bricks tray system, which is sort of like a channel shaped system that is then attached into a kingspan karrier panel. So this is sort of an all in one cladding waterproofing insulation panel. I believe it's an XPS insulation that's wrapped in a metal panel.

 

And these are tongue and groove panels that come together and they're flashed at their tongue and groove. So the metal panel on the outside acts as waterproofing, especially when the joints are flashed. Then there is this completely separated other metal panel on the interior, the separated by this XPS installations that provides your insulation and then that interior panel allows you to attach to the studs.

 

So there's no need for sheathing or waterproofing layer or another set of insulation. It's all in one. So we have that karrier panel and then that is attached to the stud. And then on the interior of the stud we have our finishes, which is general sheetrock.

 

00;19;29;14 - 00;19;33;06

DP

And the installation values of the walls?

 

00;19;33;06 - 00;19;36;24

PM

Two and a half inches. So I'm guessing that's probably about R 14.

 

00;19;36;26 - 00;19;46;17

DP

That sounds really interesting. And using thin brick, I mean it's a veneer like anything anyway, so whether or not you're going to use something that's three and 5/8 thick or it's a half inch thick, it’s still a veneer.

 

00;19;48;19 - 00;20;22;13

PM

100% agree. We live in a world now where energy code and sustainability issues are vitally important. And for the most part we know Brick classically is like a veneer as a cladding and a structural system, but it's just really not done that way anymore. It's mostly a cladding system now because we need to have this rain screen where where air can move behind the facade, and we need continuous insulation.

 

So if it's going to be mostly a veneer. Now I'm a fan of the thin brick systems because it saves you that extra couple of inches.

 

 

00;20;22;16 - 00;20;40;15

DP

Yeah, I totally agree. And you touched on this a little bit. Just back to the esthetics. So tell us about the style choice. The building is contemporary. When I read about the architecture you guys talked about as statically trying to work with the existing architecture in the neighborhood. Tell us a little bit about that.

 

00;20;40;17 - 00;22;28;22

PM

I think it's largely about scale. So as I mentioned, we are trying to create a datum that matches with the neighbor. In terms of height. I think the concern back to what you mentioned before is that people are going to feel like their neighborhood is growing rapidly and that it feels much more urban than it used to. And so that was really important to us in terms of context to make the scale feel as if they had always known this building.

 

Beyond that, we felt that Brick was an important choice. There's a lot of brick in the neighborhood. We felt that other materials might feel too distinct from the rest of the context. I don't think it's important that we try to look exactly like the neighbors because we're in a different era, a different technology. But there needs to be some tie to the way it is.

 

And it was also sort of important to us that the windows had some sort of gridded logic to it to match the neighbors. So there's a nod to that. Beyond that, we felt freedom to go a different way. And so we relied on sort of a color choice as one way to do that, to create this darker volume on the lower part would sort of emphasize the height of the building that it matched the others because it's so present in its darkness.

 

The other thing we liked about the darkness is that it made all the details a bit more subtle. It gave us a little more freedom to do things like these patterned bricks and these shadow lines that indicated that this was a newer building and that it has some innovative techniques and details to it. But wasn't flashy to the point of look at me and forget everyone else in the neighborhood.

 

00;22;28;25 - 00;22;39;02

DP

That's well explained. So when you guys did drawings for the architecture, for the construction process, all 2D, 2D and 3D, Revit, what are you guys working out?

 

00;22;39;02 - 00;23;05;06

PM

Yeah, well, Revit. Our office is 100% BIM. We are an office that was founded since 2010. So the partners, all the employees, we all grew up in this, so we're 100% BIM. We use Revit as our software. So everything is done in Revit from beginning to end. We found this really beneficial with some of our clients too, because we can get the visualizations a lot quicker and that just makes them feel comfortable.

 

00;23;05;08 - 00;23;16;07

DP

Yeah, clients love that. Yeah, for sure. So do you guys learn anything interesting through the design in what you're currently in construction process? Anything new for you as you've been working on the architecture?

 

00;23;16;09 - 00;24;17;03

PM

Well, let's see things that I would want to talk about. Usually the lessons are the things that like you didn't see coming or you feel like you could have control. I think one thing that we really learned on this project is moving to this Kingspan panel that I mentioned before is a new thing for our office. We're doing it on two projects or two simultaneously.

 

We knew a lot about the details going into it and we really believed in it and we love it, but our contractors were not familiar with it and so there was definitely a lot of lessons in how to communicate these details because a lot of them came in and were like, They see these new Legos for the first time and they're like, Oh, they must go together like this.

 

And then you arrive at a site and you say, No, actually you put that piece on wrong. It should be like this. There was a lot of back and forth and learning about how to communicate, when to come in in the process with somebody that hasn't used the technology before and really get them up to speed on it.

 

00;24;17;06 - 00;24;42;15

DP

That's funny, yeah, GCs love that when you walk out into the field and you tell them they're wrong. Yeah, sure. Before you go, Peter, you've been an architect for some time based on what you know today about being an architect, do you have any words of advice for your younger version of you, or maybe for some students or young architects that are just getting rolling?

 

00;24;42;17 - 00;25;03;01

PM

Well, that's a great question. It's easier for me to advise my earlier self than advise a generic architect in school, and I hope this advice applies for me. I was always an introverted sort of person. I come from a very conservative rural background and it took me a while to learn how to really speak my voice to people.

 

And I think in school there's this sense that your work is always out there for critique and that you should be careful about everything you do. I think I've learned over time that as long as you follow your own voice and your own beliefs, that those things will fall in place. And so I would advise myself, when I was younger, to not be concerned about whether or not your voice is going to land perfectly amongst your audience.

 

I think as long as you believe in it passionately and you talk about it strongly and you think about it all the time and you critique yourself, that that will lead to stronger work and it will lead to people wanting to see your work and interact with your work and make sure that it gets built in the way that you had always imagined it.

 

00;25;03;02 - 00;25;51;16

DP

Yeah, I think that's a really beautiful way of looking at things right that it will land in the right location. You're just responsible for finding your voice and expressing it as best you can within the framework of the work that you do. That's great. So, Peter, it's been great to have you here. Thanks for your time. Where can people go to learn more about Palette Architecture and yourself?

 

00;25;51;19 - 00;26;13;22

PM

Well, certainly you can go to our website, PaletteArch.com, or they can follow us on Instagram also @PaletteArch.

 

00;26;13;24 - 00;26;29;26

DP

Well, Peter, thank you very much. It's been great to have you.

 

 

 

 

TRANSCRIPT

00;00;00;02 - 00;00;05;08

Doug Pat (DP)

Let's go inside the vault. The design vault.

 

00;00;05;10 - 00;00;25;28

Lorne Rose (LR)

They wanted a spacious two car garage with mudroom, and then they like to entertain. So a combined living room, dining room, and then a kitchen. They love to cook. And then a beautiful two-story family room. That's all done at hundred-year-old occupied a beautiful room that some people think looks like a small chapel.

 

00;00;26;00 - 00;02;37;16

DP

This is my guest, Lorne Rose. I'll share more about him shortly. Today, we're going to talk about Lauren's Tudor home in Toronto. The neighborhood has a number of esthetically diverse architectural gems from the turn of the century, including a traditional Tudor that served as inspiration. Lauren's Tudor home features a variety of signature Tudor brick patterns from diagonal and herringbone to basket weave.

 

The traditional half timber board work has been replaced with stone and a carved stone belt course that runs across the front facade, separates stone veneer at the base, a steep gable stance across all facades, giving it order and magnifying the Tudor style. The roof is cedar shingle and the overhangs are traditional. The rear of the house has a spacious covered porch with wonderful wood.

 

Details, and the opposite side features a carved stone entry and a large wood and glass front door. The front landscape is organized, yet slightly whimsical, with a U-shaped drive. The backyard, in contrast, has an oval shaped lawn area surrounded by garden walls, apple trees and a vegetable garden.

 

Hi, I'm Doug Pat, and this is Design Vault. Lorne Rose Architect was established in Toronto in 1995 as Rose Pegasus Architects Inc. In 2000, his firm became Lorne Rose Architects. Lorne had an idea long ago at the age of ten, in fact, that he wanted to be an architect. He eventually attended the Ohio State University, receiving his Bachelor of Science in Architecture and his master's degree from the University of Michigan. In his practice, Lorne prides himself as hands on and intimately involved in every residential architecture project that comes through the door down to the last detail.

 

Lorne’s firm has completed many projects, including work in the United States and Canada. Lorne lives in Toronto with his family. He also coaches hockey travels and loves photography. Welcome, Lauren. Nice to have you with us today. So tell us a little bit about Lorne Rose, architect in Toronto. So where are you guys located? Toronto? What's the size of the firm and what type of work do you do?

 

00;02;37;22 - 00;03;07;16

LR

First of all, thank you for having me. So we are a small critique firm, the architectural side. We are myself and two others. Right now we do have an interior design firm called Empress Design and have recently taken on my side partner who is going to be a partner at the architectural firm. So the architectural side right now it's three of us and that interior design side there is probably about seven, and that supports jobs counting receptions.

 

00;03;07;18 - 00;03;09;27

DP

And to do only residential work.

 

00;03;10;00 - 00;03;36;03

LR

We're known for our residential work, but we do do some commercial work, some community work in terms of residential neighborhoods. Oftentimes, it's my residential clients who ask me to do some of their subdivision work or commercial work for them. We are located in Forest Hill neighborhood. Our office is kind of unique. It's really just like a house, except in this case, the kitchen is on the third floor and offices basement ground in second.

 

00;03;36;05 - 00;03;46;25

DP

So tell us a little bit about yourself. Your original firm was started in 1995, then transitioned in 2000. Tell us a little bit about that and then your role in the office currently.

 

00;03;46;27 - 00;04;31;15

LR

So I made the job was turning 30. Just got pregnant with her first son and decided it was time to leave. The firm that I was at. Enterprise just set me up in business. Taught me a lot. Worked together with him for many years. He was specialized in new work, high rise work. But I specialized in the residential, and it's really my passion that's dealing with the clients hands on.

 

The turnaround of projects is a little quicker and not working on a condo for two years or less. So we sort of finally decided that he had no interest in the small residential, which was my passion. So we just separated the first store out of the same office and still I wrote to my new office about six years ago or so.

 

00;04;31;22 - 00;04;33;24

DP

He's still practicing architecture as well.

 

00;04;33;26 - 00;04;44;14

LR

Andrew has actually, I think, retired. Some of his associates have taken it over. That first couple, Rafael Augustus, and they're quite successful still friendly with him.

 

00;04;44;16 - 00;04;56;29

DP

That's great. Now, you had mentioned residential contracts. I'm always curious, most of the jobs that you take on residential projects, how long do they take from kind of start to finish Client walks in the door to they got the keys to the front door.

 

00;04;57;04 - 00;05;23;01

LR

Right. So typically, I'll tell a client the municipal process in here is quite long. So from the day they hire me to the day they put a shovel in the ground, could be anywhere from 6 to 12 months. Used to take 10 to 12 months to build a house. But since COVID hit, Toronto may be different than other cities that exploded here, we've never been more busy than we were during COVID.

 

So you're looking at 12 to 18 months to build a home here now.

 

00;05;23;08 - 00;05;31;11

DP

I mean, it's kind of surprising. As a US citizen, I always hear about how expensive Canada is. And Toronto's extraordinary, isn't it?

 

00;05;31;17 - 00;06;23;17

LR

It is extraordinary beyond belief. It's surprisingly the fourth largest city in North America. I've been wrong about everything. During COVID, we thought the market would crash. Interest rates were extremely low and people were just buying up homes. People were tired of their own homes. They would renovate or they would actually, surprisingly, they left their neighbors. They decided to tear down their perfectly good house because the cost of getting it aged what we have here called land transfer tax and buy a new home, a tax on new people, said, you know what, I love my street, my neighborhood.

 

I'm going to tear down this somewhat good home and build a new home. So the industry exploded it very, very expensive to build a house in Toronto because the trades had actually good for too long. It seems to be slowing down a little bit now. But as I said, I'd be wrong about everything. Sure.

 

00;06;23;19 - 00;06;24;04

DP

You're not.

 

00;06;24;04 - 00;06;26;20

LR

Alone. I'm not going to make predictions.

 

00;06;26;23 - 00;06;34;19

DP

Yeah. So today we're going to talk about a Tudor home project that you did. What was the year that it was built and approximately where is it?

 

00;06;34;23 - 00;07;10;21

LR

So it's in the neighborhood. It was 13 years ago that my clients are again. So we probably started it 15 years ago. It's in a neighborhood or a street that did not have many houses on it. The owner moved a block east. They elected a tutor house that they renovated and decided to do a new Tudor house on this lot.

 

Since that time, the street has exploded and there are probably six or seven houses under construction on the street, many of which I am doing, which is nice. I don't do also.

 

00;07;10;25 - 00;07;13;24

DP

So there was nothing on the property when you built that house.

 

00;07;13;26 - 00;07;30;29

LR

There was an okay Tudor style home in Toronto. Land is at a premium and people are buying perfectly good homes and tearing them down. The home that was there did not meet the client's needs, so tore it down and designed a new house.

 

00;07;31;01 - 00;07;32;24

DP

And how big was the lot and truck?

 

00;07;32;24 - 00;07;40;19

LR

So we go by frontage which is very different states. So it was a 64 foot lot by 175 feet.

 

00;07;40;22 - 00;07;45;21

DP

That 100 foot dimension. Is that the entire length or just the street front?

 

00;07;45;23 - 00;07;48;05

LR

175 feet long.

 

00;07;48;12 - 00;07;49;08

DP

Front to back.

 

00;07;49;09 - 00;08;07;00

LR

Yeah, 64 feet wide. The street is predominately 50 foot lots, so this is probably the widest lot on the street. Right. You went to other 60 footers decided. I think there's a few fourth graders. That's how we call them here. 50 footers for this region.

 

00;08;07;02 - 00;08;09;22

DP

What were the programmatic requirements for the clients?

 

00;08;09;24 - 00;09;42;03

LR

Most important things were a two car garage with that mudroom attached garage. Previous house, they had had a detached garage and they never park your car in the back. And as you know, we deal with a lot of snow here, clients. So shoveling the driveway, all that. And then people put junk in there in their garages. So they wanted a spacious two car garage with mudroom and then they like to entertain.

 

So a combined living room, dining room, the living room here is going a little bit to where a general over these days we're finding people are using them. You have the most expensive furniture and nobody sits in them. They sit in a family room or great room. This family needed a combined living room, dining room because they like to have dining parties, so they could expand their dining table into the living room.

 

Living room has a piano, just table. That's it. It's mostly dinner just to expand for family occasions, holidays where they host large parties and then a kitchen. They love to cook a great inventory. It's very five feet by 14 feet long, very well organized with an extra fridge, whole wall of spices and sauce charged space, and then a beautiful two story family room.

 

That's all done at our hundred year old time. There was a dream of the homeowner to do a room out of 100 year old, not a pine. So it was all party boards carved and played down to create a beautiful room that some people think looks like a small chapel.

 

00;09;42;05 - 00;09;44;08

DP

So how many square feet is the house total?

 

00;09;44;16 - 00;09;57;06

LR

The home is about 5000 square feet, four bedrooms for best two children. The wife was from the States, so they often have family ties to the business suite at all. Work lunch.

 

00;09;57;09 - 00;09;59;27

DP

That's awesome. A homework, lunches get used.

 

00;10;00;01 - 00;10;07;21

LR

It did before the kids moved out. And now she's fighting the headstone for doing some of his hobby work.

 

00;10;07;23 - 00;10;15;22

DP

So in plan. Then when I looked at the elevations of the building, it looks like a large rectangle set, Correct? Or is it way more complex than that?

 

00;10;15;24 - 00;10;38;17

LR

It is. The floorplan is garage on the left side looking at the home office across the front door and then the window that is the piano area in the living room. There's actually a garden shed at the back which is attached to the house strip and turn into a cabana the car in order to have a pool because they need it.

 

So it's a garden shed. They like to garden.

 

00;10;38;19 - 00;10;42;24

DP

So is the site completely flat? No. Unique topographic features.

 

00;10;42;26 - 00;10;55;08

LR

Pretty much flat. So much so that the homeowner had to do two huge drainage pits to ensure that drainage worked. The area has a lot of clay in the soil, so it doesn't drain that well.

 

00;10;55;10 - 00;11;04;18

DP

So this next question is going to be interesting because I'm sure it's at least a little different from the U.S. What were the project restrictions like zoning codes, etc.?

 

00;11;04;20 - 00;11;35;22

LR

There were variances to the bylaw. We were required to have five front side yard setbacks. We have four foot sideboard setbacks. The density in this neighborhood go by 35% of the lot area is what gross floor area we were slightly over. Not very common in the area to go over 35 is antiquated. Most homes are going to be few across the street.

 

We did renovation on a smaller block, but we were at 90%. It's not uncommon to get the variance for the density.

 

00;11;35;24 - 00;11;36;24

DP

And how many stories?

 

00;11;37;01 - 00;12;12;21

LR

Two stories lot of people thought it had for its story. It could have had a third story, but the family didn't need more space. The covered porch was another very important requirement for the family and served them very well during COVID. Like some parts of the United States where people worked as servants of the rules, Canadians, I can say, were quite observant.

 

So it was a great place. Covered portraits, heaters for entertaining in the fall. Even in the winter, on a warmer day, family could entertain outside with guests, nice barbecuing area, a dining area sitting here.

 

00;12;12;24 - 00;12;22;29

DP

So tell us a little bit about the style choice. You had said that the neighborhood had a Tudor style home that you really liked before you designed this one.

 

00;12;23;06 - 00;13;56;28

LR

Yeah, there were some Tudor, a lot of postwar architecture. Toronto is very much influenced by English architecture, especially at the time. But the home that was an inspiration for this one was a much smaller home for us. So village near where my office is, it was a much smaller home that had beautiful brickwork and the Midband was a homage to that house in Forest Hill, where you describe it, is it orange segment carving it would have been done out of wood on the original house.

 

These beautiful brick patterns which you would see on other homes or so village that really caught my eye. And nobody really replicates properly these days in addition of spores that were carved, details like that on the old Tudor homes from the turn of the century in the revival of these styles are always left out. So we really wanted to do it correctly on this home, and the homeowner spent extra money to do it properly and more authentic.

 

Subsequent to that, there were quasi replicas of this house that popped up. People chortle when they see something they like. We started emulating it, but I don't take it as a sense to take it as a form of compliment. I didn't invent anything here. I was borrowing from collecting borrowing details from architecture styles in Italy, and I do it with any style in modern or Georgian or French provincial.

 

I like to use the most authentic details that clients will allow us to afford.

 

00;13;57;00 - 00;14;02;20

DP

So was there ever any question then in your mind that this House could be something other than brick?

 

00;14;02;22 - 00;14;29;19

LR

There were examples that I looked at as well, where the second floor rather than brick, you could use some of these patterns in stone, but red brick was dear to the owners liking, and I don't think there was really another option in this item where the house is a stone skirt, the rocks around the house, but the rest of the house's brick.

 

And while many people do a out of all stone sites and red brick, it allowed us to tie to breaking all the way around the house.

 

00;14;29;21 - 00;14;39;07

DP

What I think is really pretty when you look at the exterior gables, the half timber construction has become stone. Talk a little bit about that and where have you seen that in the past?

 

00;14;39;09 - 00;15;13;00

LR

There were some examples I've seen in the city, but for the most part, even on a lot of houses, we knew that our Tudor will have a cornice, detail are winters are harsh or weather is harsh or summers are hot, sticky and we have extremes. The thought of painting wood timbers, half timbers every now and then was not something the homeowner wanted to do, so we suggested doing them out of stone.

 

There's no way. So we've done that a couple of times. Just to cut down on this. There are some parts that are would not allow this house the stone.

 

00;15;13;00 - 00;15;26;17

DP

Details on this home are absolutely stunning. This carved front entry left and right. They did this little custom rose after your name. Now, where did you find somebody that does that? I mean, unbelievable.

 

00;15;26;19 - 00;16;35;22

LR

Funny enough, little story about the limestone on this house. It came from Indiana and were horrible. What I learned during this house is that Indiana supplies great stone. But in the future, I would never let them cut the stone. We have some great stonemasons in Toronto. We actually had to have some of them fix up the stone that was originally carved in Indiana.

 

But nowadays we ship the blocks out from Indiana and everything is carved here. I learned that on this house. So we have tons of great carvers here. The guy who did this house is Romanian and he worked for a school back in a communist Romania. And so a lot of great talent from Europe. Toronto is a melting pot, as is Canada, people from all over the world.

 

So there's no shortage of great transport, although I shouldn't say that as they're aging those artisans, the children do not want to follow in their parents footsteps. So I hope it won't be a lost art. But that's where the C and C machines of today computers are allowing us to still allow for those carved rosettes.

 

00;16;35;24 - 00;16;39;26

DP

So did you have any challenges finding a good brick Mason No.

 

00;16;39;26 - 00;16;56;08

LR

In fact, shared signature digitally had always been one of the best masons in Toronto, and I asked to take care of during makes my hair usually mostly stone. He didn't really want to do the brick, but when he saw the intricate brick patterns, it grated your brickwork as well.

 

00;16;56;16 - 00;17;03;26

DP

So Lorne, we were just talking about the brick. Could you tell us a little bit about the color and whether or not it was a special mixture?

 

00;17;04;02 - 00;17;51;11

LR

Yeah, at the time I was dealing with a gentleman named Isaac Raposo from King Masonry. Now he had an idea. We worked with Isaac for years. It came straight out of the company's work that he was passionate about brick and Stone. So he said to me, Lord, I have this special brick that's being used in university states, and it's Glengarry brick, and it's 85% Shenandoah and 50% Colt 50 3dd It's been used at the university.

 

It had a nice tonal range, some fire bricks in there, so it wasn't all flat coloring, a great deal of variation on the brick. And I said, Great, let's do it. Isaac was instrumental in suggesting that Brick and other clients have used a similar mix.

 

00;17;51;18 - 00;18;01;07

DP

So were there any unique construction details using masonry or brick on the home? Anything that you had never done before? Anything that you do a lot.

 

00;18;01;10 - 00;19;27;06

LR

This was the first time that I used the stone boards at six feet to bring, and it was the first time, I believe, that these different brick patterns on a house. So it was challenging for the Masons. I remember calls about how do you want to do this? Even on the stonework, we had some smoother blocks, but I wanted them chiseled with different patterns on them, really authentic stuff.

 

I didn't want perfectly aligned joints. I wanted it a little bit. I called it messy, but when it's done perfectly linear, you can spend the money on a real stone. It doesn't look real because it's so perfectly laid up. Bellies were put on a lot of the stones chopping the edges off. It's a little bit of a mess.

 

Your joint, Chino. I like to call it a rock joint. I was particular about the laying of the stone brick and quite happy with the way it turned out. The chimneys are quite detailed with different patterns as well. And limestone caps. One of the things I like to do is put superior clay chili pots on jumbo ones. One of the details I loved in traveling in England and there would have many chimneys and different clay pots on top of each.

 

Normally on our homes we put two of the same. I wanted to do something a little more British and mix them up. So each chimney has two different pots on it just for fun.

 

00;19;27;09 - 00;19;42;15

DP

So when it comes to a lot of these details, brick coursing, etc., do you guys end up doing a lot of a variety of drawings, series of iterations, looking at different patterns and then go out into the field and look at examples that the Mason puts together? How do you guys do that?

 

00;19;42;22 - 00;20;03;08

LR

That sounds a little more romantic than how it actually happened. I do have some great books on brickwork that I get to reference, but it was more the Mason gene and I just sitting out there and discussing them and looking at what we could really do. Not quite as romantic as drawing it all.

 

00;20;03;10 - 00;20;11;15

DP

Yeah, but it's a little more authentic in terms of how we used to do things as architects, right? Walk out onto the site, you tell people what to do so.

 

00;20;11;17 - 00;20;21;15

LR

That Gino is up for the challenge. We laid them out on the ground just to verify. I had ideas of what I wanted, but we did actually draw on that.

 

00;20;21;18 - 00;20;26;27

DP

So when you drew the building, are you guys using CAD? Are you drawing in 2D or are you drawing in 3D?

 

00;20;27;04 - 00;20;49;23

LR

I'm a little bit of a dinosaur. I'm going around my office. Who doesn't use AutoCAD? We now use Revit as well. I know how to use it, but every time I come to the computer, that stuff, you get away with it. I have two very talented staff, one staff member with me 23 years. They sort of know how I think that makes the office much more efficient.

 

00;20;49;26 - 00;20;59;19

DP

So I'm sure Toronto has rules about energy efficiency. Was sustainability an issue when you built the home in terms of the wall cavities, etc.?

 

00;20;59;21 - 00;22;19;19

LR

There were some things that we did here differently. I think our energy efficiency rules came into play a little bit more after this House would interconnect. But one of the things differently down here, it's normally called psychiatrist's insulation in the walls. In this case, we did two inches of £2 spread foam against the plywood, more airtight and a higher insulation lets you go over four inches a spray for the added impact of going to six inches is not necessarily worthy.

 

So we did two inches a separate fall and then three and a half inches of fiberglass insulation to give us a little bit higher our value at the time the spray fall thing was relatively new. The building department wasn't sure if there was still a void, how to deal with it still needed paper barrier. You don't necessarily need it anymore.

 

We did a blended version and built it. Department accepted it, still liked the system. It was cost effective way to get the air tightness and fill the void. Insulation nowadays where champ moving more to at least one inch exterior insulation and air space. Then Brick, our next building code will probably make that mandatory. And that way you don't lose as much thermal value through the stud cavities.

 

00;22;19;22 - 00;22;28;06

DP

So I know you do a lot of homes. Was there anything that you or your team learned during the process of building this one, designing it and having it built?

 

00;22;28;09 - 00;22;53;19

LR

Yes. When you specify certain forgeries dressed, let the lumber yard use a different kind of floor choice. There is a few problems with that. But aside from that, things went relatively urban innovation at home and did a great job. One of the things we did that was unique here. I like skylights a lot, but I don't like looking through a skylight well and seeing the clouds.

 

00;22;53;21 - 00;23;19;21

LR

So we do these lenses, frosted lenses, they look great, except they can get irksome. So there's a mechanical room in the roof here. So through access, through the mechanical room, it's a little boardwalk where the homeowner can't actually open up a door and vacuum the box off of the skylight. Let's just get rid of this box and we'll have the box get in there.

 

But they do look up. You know, I see books. That's great.

 

00;23;19;21 - 00;23;28;25

DP

Very creative spoken just like an architect. So you've been an architect for a long time. If you could give your younger self some career advice, what would it be?

 

00;23;28;28 - 00;23;29;24

LR

Wow.

 

00;23;29;27 - 00;23;31;21

DP

We're always learning as architects.

 

00;23;31;23 - 00;23;40;27

LR

That's a great question. It's not an uncommon question, but I've never really thought about it. I'm passionate and love architectural history and I learned a lot from it.

 

00;23;41;02 - 00;24;13;09

DP

You know, when I went to college, architectural history was a class I had to take, and it wasn't something that I really enjoyed. And ultimately I ended up with a YouTube channel. And all I do, or most of what I did for many years is make videos about historical architecture, right? So you never really know when you're going to use that information and how passionate you might become about something would seem to me, looking at the breadth of the work that you've done online, that you've got a really nice historical background that you're utilizing all the time.

 

00;24;13;09 - 00;24;21;17

DP

And it would seem to me if I was the younger you, I'd say to you, Look, man, pay attention, because you're going to be using all this information someday.

 

00;24;21;19 - 00;25;35;13

LR

So it's interesting. It's an architecture school was great. And the worst part about architecture history, which I loved, was that it was an 80 year class which any college students thought was awful and it was like three times a week. And you'd go to this class tired as can be, and the first thing they do is turn off the lights and show you slides.

 

So it was hard to stay awake, but I never anticipated the stuff that I did see, which was influenced by Peter Eisenman, who was there at the time, was nothing traditional. And just like I say to anybody, architect, just pay attention to trigonometry. Yes, you do use it. Toronto's a very traditional city. If I had lived in another city, I might have done more modern architecture in my career.

 

Now we're doing a ton of it and I love it. But just like, you know, Picasso was a classical painter before he did, where he did the traditional architecture and studying the masters in scale proportion, that's the talent that somebody gave me that I can see a proportion. I learned it through architecture styles, and then you can apply that to any style.

 

So I think that's paying attention in those classes as hard as they were when the lights were really made a difference in my career.

 

00;25;35;15 - 00;25;42;10

DP

Lauren, it's been great to have you here. Thanks for your time. Where can people go to learn more about Lorne Rose, Architect Inc and yourself?

 

00;25;42;17 - 00;25;52;14

LR

Lorne Rose dot com And it's not a popular name in the United States. It's very popular Canada the sixties it's aloha Annie RC dot com.

 

00;25;52;17 - 00;25;53;28

DP

Are you guys on Instagram.

 

00;25;54;01 - 00;26;09;21

LR

We are. I have to say I'm terrible at social media and I should be doing more because a lot of Americans have reached out based on some of the social media I need to concentrate more on. Yes, I am on Instagram and learn search. So yeah, please look us up.

 

00;26;09;27 - 00;26;14;02

DP

Well, it sounds like you're very busy. It was wonderful to have you here. Thank you so much for your time, Lorne.

 

00;26;14;04 - 00;26;18;02

LR

Thank you for having me. It's fun.

TRANSCRIPT

00;00;00;02 - 00;00;05;10

Doug Pat (DP)

Let's go inside the vault. The design vault.

 

00;00;05;12 - 00;00;30;08

Gabe Deck (GD)

We wanted to make sure we could fit as many units while making them as wide as possible. So five ended up being kind of the magic balance point to get them feeling pretty wide, really maximizing at least four bedrooms, five plus bathrooms, elevators and then roof deck spaces are pretty key for Philadelphia Center City townhouse developments. These houses each contain three roof deck spaces.

 

00;00;30;10 - 00;03;16;07

DP

This is my guest, Gabriel Deck. I'll share more about him shortly. In this episode from the Design Vault, we highlight Gabriel's Sansom5 Project in Center City, Philadelphia, Sansom5 is a collaborative venture between Philadelphia and New York developers. The site is a 5000 square foot rectangular parcel with three street frontages that previously contained small office buildings. The site is in Center City, Philadelphia, close to the Rittenhouse and Fittler's Squares.

 

There's a five foot grade change across the main frontage, and the parcel sits within a flood zone adjacent to the Schuylkill River. Most neighborhood buildings are primarily brick masonry with strong cornice lines, which drove esthetic and material choices. Each townhouse features entry door locations where grade changes mitigated and the facade is recessed within a portal of capstone. The project, which is light brown brick, also features facade materials that include gray, flat block, metal panels, wood, accent cladding, and a mix of black and brown clad, slim profile windows.

 

The project includes five high-end townhouses which maximize square footage. Each home contains four bedrooms, six bathrooms, an elevator and three outdoor spaces. Hi, I'm Doug Pat, and this is Design Vault. Gabriel Deck has a Bachelor of Architecture from Temple University. He describes himself as a big time Philadelphia guy, having stayed in Philly after college and continues to do business there.

 

He began his career working for Wallace Roberts on a variety of project types. After the 2008 recession, he got his real estate license, where he made a number of contacts in residential development over the next few years. These relationships led to a number of small residential design projects. He eventually started his own small firm. His work was mostly urban, small scale residential editions, which quickly grew into new construction townhouse developments and then larger adaptive reuse residential projects.

 

The scale of work grew over the first few years, as did the business. The firm was rebranded GNOME Architects in 2018. The team is currently nine people operating out of a repurposed public high school in South Philadelphia. The firm has 400 plus projects to date, mostly in Philly, but also in other parts of the country as far reaching as Colorado and Maine.

 

Welcome Gabe. It's nice to have you with us today. So tell us a little bit about GNOME Architects in Philly. Where are you guys located? What's the size of the firm? How long has it been around and what type of work do you do?

 

00;03;16;09 - 00;04;27;27

GD

So GNOME Architects has been around since about 2018 after a rebrand of my previous business. We're currently a team of nine people comprised of myself and my business partner, Derek Spencer, and a handful of designers. So the business started back in 2013. Originally when I quit my job at WRC to focus on some small residential projects that I had acquired from developer contacts that I had made working in real estate.

 

Philadelphia is a small town in terms of the industry. Word spreads and quickly I was able to get a lot of project work by way of these developer contacts. Most of the projects were third floor additions, small townhouse, new construction, infill projects. And once I partnered with Derek Spencer, we started focusing a bit more on larger multifamily work.

 

The team grew, the project scale grew. Now we are working on developer driven business on one end of the firm doing large multifamily work, low rise podium buildings. Most are 30 to 50 units in scale. And then on the other side, we're doing custom single family homeowner projects with interior design as well.

 

00;04;27;29 - 00;04;41;10

DP

So Gabe you had your real estate license, which is pretty interesting for an architect, and you use that, I'm assuming, for a few years during the recession and then kind of moved back into architecture. When did you get your architectural license?

 

00;04;41;13 - 00;04;58;08

GD

So architectural license came around 2012, couple of years after the real estate license, and kind of was doing the two in tandem, you know, working nights and weekends trying to do sales. I got burned out pretty quickly, doing a full time job with an architecture firm, and then that on nights and weekends, it was a lot.

 

00;04;58;11 - 00;05;15;06

DP

What's so interesting to me is over the course of my career, I have met a lot of architects that end up doing lots of different jobs because architects aren't always busy all the time and they're one of the first people hit by recessions.

 

00;05;15;08 - 00;05;36;28

GD

Yes. And that's exactly kind of what happened to the big firm that I was with. I wasn't sure of my future there, wasn't sure what I was going to do. And real estate. I had a number of friends that were in the business. I went in that direction and I figured it was somewhat parallel to an interest in residential design.

 

So it seemed like a natural fit and thankfully it led to a lot of good relationships and some work to start the business.

 

00;05;37;05 - 00;05;42;19

DP

Yeah, it certainly sounds fortuitous. So what is your role in the office as a principal?

 

00;05;42;25 - 00;06;01;00

GD

I share the burden of running of the office with my business partner, Derek Spencer. I would say my role is more in the CEO traditional sense, while also the design director of the firm, where my business partner is handling more of the technical development of things and more overseeing the design development of things.

 

00;06;01;02 - 00;06;06;14

DP

So it's always interesting to find out how people end up working together. How'd you meet Derek?

 

00;06;06;17 - 00;06;40;10

GD

Derek and I started working together. He was my first employee, actually. I met him through mutual contacts when I realized I was spread too thin, working out of a spare bedroom in my home in the early days of my business. Derek was currently working for a firm across town, that’s, I'd say, one of our competitors. He was looking for something new, and it was the infancy stages of the business, so he came to start working with me.

 

And fast forward to three years later, we had a team of four of us and we were ready to rebrand and create GNOME Architects.

 

00;06;40;13 - 00;06;57;06

DP

So let's dig in here and talk about the project. This is really beautiful and I would imagine it took some time to get done in Center City, Philadelphia. So how did your office get the project? And you did mention obviously that you had some relationships or acquaintances that were developers.

 

00;06;57;09 - 00;07;23;25

GD

This project actually came from one of my very first clients that I had who was connected with the real estate office where I hung my license at that time. It was a partnership between that long existing client and a couple of developers from New York City that purchased the property, and we assisted them to take it through all of the permitting process and all the hoops we had to jump through as it's a pretty sensitive site.

 

00;07;23;27 - 00;07;28;02

DP

So could you give us a little history of the location before your buildings?

 

00;07;28;04 - 00;07;57;09

GD

So the site is on the western end of Center City, Philadelphia, about a block away from the Schuylkill River, sits in a floodplain about five feet or so below the FEMA flood zone line. It was a three sided site. So we had challenges to create, drive all access and building entrances and maximizing the use of both Center city and looking west towards the river.

 

So it was a challenging yet a site that had a lot of great opportunity as well to work with it.

 

00;07;57;12 - 00;08;03;10

DP

Yes, So unusual to get a piece of property in the city with three street frontages.

 

00;08;03;13 - 00;08;18;27

GD

Yeah, it's pretty uncommon, but it actually allows for some benefits as far as how you apply the zoning code and how city planning orients. The frontages actually worked to our benefit to get a driver on the back and five houses fronting the broad side of the site.

 

00;08;18;29 - 00;08;43;06

DP

So, Gabe, what was the scope of the project and what were the programmatic requirements for the townhouses?

 

00;08;43;09 - 00;09;09;12

GD

So the scope of the project was to try to maximize as many townhouse units as we could across the site, while also ensuring that they felt large and spacious and wide with Philadelphia townhouse development. You're often dealing with very narrow properties, so anything that's built new construction is typically somewhere between 14 and 20 feet wide or so. So we wanted to make sure we could fit as many units while making them as wide as possible.

 

00;09;09;12 - 00;09;30;29

GD

So five ended up being kind of the magic balance point to get them feeling pretty wide. The developer wanted to make sure we could provide as much parking as possible, so each unit has a two car garage and then really maximizing at least four bedrooms, five plus bathrooms, elevators, and then the big thing here also is just outdoor spaces.

 

00;09;30;29 - 00;09;42;01

GD

So roof deck spaces are pretty key for Philadelphia Center City Townhouse developments. These houses each contain three roof deck spaces.

 

00;09;42;04 - 00;09;45;02

DP

And how many stories has the project has had? Four or five.

 

00;09;45;04 - 00;09;59;18

GD

It's technically five stories by way of the code. However, there is a pilot house on top of each house, which also contains some livable or habitable space, which makes the buildings read as six stories interesting.

 

00;09;59;18 - 00;10;21;08

DP

So let's talk a little bit about the style, the architecture, some of the buildings that surround it. I had mentioned that we had some pretty strong cornice lines locally and you probably picked up on that in terms of brick courses. And then we've got some really beautiful, tall, decorative patterning on each one of these facades.

 

00;10;21;15 - 00;10;45;02

GD

We typically like to do our best to work in some contextual elements into our projects. So with this site, there's a lot of surrounding context that has primarily brick material, very strong cornice lines at the rooflines. So inserting a new development that is essentially six stories adjacent to a lot of three and four story buildings, we had to kind of get creative to make things fit in.

 

00;10;45;05 - 00;11;08;23

GD

So we kind of struck a line at the top of the fourth floor for the brick material. Coming up to that, a chorus line at the top of the fourth floor. And then we selected a kind of a gray, brown, beige tone brick, as a lot of the neighboring buildings are a variety of colors. So there's not really a strong predominance of red brick or white brick or brown.

 

00;11;08;23 - 00;11;16;20

GD

It's kind of all over the place. So the gray brown tone of the selected brick that we used kind of was a nice middle ground for it.

 

00;11;16;22 - 00;11;34;10

DP

So let's go back to the zoning for a second. So these buildings step back as they move up above that third story. Plus they're up at least on one end, at least five feet, creating these stoops. Did you have to step the buildings back? I know you clearly did that for functional reasons to have these roof gardens up there.

 

00;11;34;17 - 00;11;57;18

GD

Yes. So it was, again, just a way to kind of fit within the context of the lower height buildings around us. The zoning code didn't really require us to set the buildings back where we did. We did it more for the outdoor spaces, but the fourth floor line was kind of the natural place to do a material transition to make the massing fit well with the vernacular nearby.

 

00;11;57;20 - 00;12;00;28

DP

Were there any historical reviews by the zoning board?

 

00;12;01;00 - 00;12;31;12

GD

Surprisingly, this was not a historical designated site, so we were not subject to any historic review. I would say the biggest hurdles we had or really within meeting the flood zone regulations. So it was a challenge to make sure we maintained all the FEMA regulations so these buildings don't have basements. We have flood doors on all facades and the challenges related to keeping your habitable floors above the flood plain were the big driving elements for this.

 

00;12;31;15 - 00;12;45;24

DP

Okay, so first floors above the floodplain, the base, the plinth, I'll call it, is masonry, is brick masonry. So you have these doors. Do they have to be a certain size? And I would imagine they're breakaway or is that the way it works?

 

00;12;45;26 - 00;13;06;23

GD

So each structure had to have a number of flood vents on at least two sides of the exterior walls. The size of these denser, I believe, one square inch per square foot of building footprint. They allow for the passing of flood water going in and out of the building just to relieve the flood pressure that the building would be subject to.

 

00;13;06;28 - 00;13;21;11

GD

So we did our best to hide them in kind of inconspicuous areas along the front facade where they were required, as well as the back of the building where the dry is. That's not really seen from the public right of way. So it was a nice place to hide these vents.

 

00;13;21;13 - 00;13;32;09

DP

So tell me about the apartments and plants we get along rectangle and each one of these is more squarish in plan. And I'm also wondering, I don't see the two car garages.

 

00;13;32;11 - 00;13;56;26

GD

Yeah. So the garages are all facing a rear drive aisle that we were able to hide. It's like a one way drive I'll access that comes in off of one of the small side streets, exits on the far end of the other side street. And then there are two car garages at the rear of each home are facing this drive while the driveway is also covered by a series of exterior decks, each deck serving one of the houses.

 

00;13;56;26 - 00;14;01;13

GD

So it's a covered drive aisle with a garage door. At either end of it, you never actually see it.

 

00;14;01;19 - 00;14;04;11

DP

And the buildings in plan are the each rectangles.

 

00;14;04;13 - 00;14;17;17

GD

Yes. So they're roughly, I'd say, 22, 23 feet wide by 40 to 50 feet deep with the drive at the rear and the main entrance at the opposite side facing the street frontage.

 

00;14;17;20 - 00;14;23;24

DP

So what was the building review like with the city of Philadelphia? Was that challenging? Was it time consuming?

 

00;14;24;01 - 00;14;45;16

GD

So it had a bit of back and forth. Our office handling primarily projects in Philadelphia. We've made a lot of good relationships with different plans examiners, different city agencies. I've gotten to know the process pretty well, as it is rather daunting for anyone who's unfamiliar with it. So I would say this project had a number of rounds of verifies from the plans.

 

00;14;45;16 - 00;15;10;14

GD

Examiner is mostly related to the interpretation of the parking that was implemented as well as kind of the interpretation of the roof deck access structures and that type of things. And typically it's a dialog with them to make sure everyone's kind of on the same page and there's a middle ground you need to find. But I would say we got through it in a couple of rounds, which was better than we had expected given the sensitive features of the site.

 

00;15;10;16 - 00;15;25;02

DP

So building materials you guys used primary Li Brick, I mentioned to you before we got rolling, it's a light. It appears to be a light brown brick. It's actually called Stonington gray velour. It's got a wide variety of values or shades in it.

 

00;15;25;08 - 00;15;46;03

GD

This was a really beautiful brick that worked well for our goals to kind of strike a line between the various masonry colors of the surrounding buildings. So it actually has a nice amount of variety in it. Some of the bricks are a lot more brown and darker. Some of the bricks are very light kind of in the the off-white color range.

 

00;15;46;03 - 00;16;06;16

GD

So once you get close, you really see the variety of color that's in there, which is really nice. And then at different times of the day, it also reads a little bit differently in the morning in direct sunlight. It kind of has a more of a warm brown tone to it and kind of in the twilight hours of the sun going down, there's a lot of reflectivity is caught.

 

00;16;06;16 - 00;16;13;14

GD

And when you look closely at it, so it really speaks well to the contemporary approach that the building esthetic has.

 

00;16;13;16 - 00;16;42;09

DP

What I love about this project is the brick pattern. You guys really spent a lot of time working on all the different patterning that's happening at the Stoops and around the windows, at the cornice lines. So tell us about how you did that in the office. Right? Typically we see a designer working on exterior elevation drawings and then, you know, the lead designers review them and it's back and forth and then eventually you're putting that into the CDs and you're doing mock ups in the field.

 

00;16;42;09 - 00;16;43;19

DP

So how did that go?

 

00;16;43;22 - 00;17;09;08

GD

Yeah, so it surprisingly went pretty smoothly on this project. The brick patterning that we went with was kind of a solution to a number of problems. We had planned driven windows, which is typical of these Philadelphia townhouse projects where you don't have a lot of space. So your windows can only go in certain areas. But then when you want to create alignments vertically on the facade and such, you've got to kind of get creative.

 

00;17;09;08 - 00;17;32;11

GD

Sometimes if that's a goal. So the brick patterning that we implemented was a tool to kind of strike these alignments vertically in the facade. So we have this recessed entry portal that is maybe two thirds of the width of the frontage, but the windows on the upper floors could not necessarily align with the jams of that portal opening.

 

00;17;32;11 - 00;18;01;20

GD

So we implemented brick patterning at the JAMB locations of the windows to then create a hard line that would align with the portal entryway below. That's one way we used the pattern to help. We also used it to just create interest on the facade. As I mentioned, the flood zone required us to keep the living spaces pretty high out of grade and that resulted in what would otherwise be a rather blank wall at the base of the building.

 

00;18;01;20 - 00;18;17;09

GD

The changes in brick pattern were a tool to kind of add some interest, so the brick we chose in relationship to a lot of cast stone that also creates some interesting accents around the window openings was a nice balance.

 

00;18;17;12 - 00;18;26;27

DP

What I really love is in this photograph on the far left you've got the brick patterning at the center stoop, but the patterning is completely different. On the left and right.

 

00;18;26;29 - 00;18;52;27

GD

The stoops were a huge focus of the design, so we had to get the occupants about 5 to 6 feet above the sidewalk level to the entry doors, which instead of having kind of a visible staircase that would otherwise dominate the sidewalk, we utilized a screen wall of brick in front of the staircase entryway that was also in front of a patterned planter box.

 

00;18;52;27 - 00;19;16;10

GD

So you have these multiple layers of masonry that add interest at the staircase. It allows us to insert some greenery as well. So it's a very tactile experience as you walk up to the front door of these houses that worked out very beautifully and the execution of the masonry and saw was fantastic by the mason as well, which we were very pleased to see.

 

00;19;16;12 - 00;19;39;18

GD

We had a series of conversations with the GC to make sure everyone was on the same page with the detailing. Our construction documents were very thorough to make sure that the areas of recess patterning as well as kind of projected roll lock and soldier course detailing was achieved and all the shadow lines could be read throughout the day as the sun moves around the building.

 

00;19;39;20 - 00;19;42;16

DP

So did you guys draw this in 2D and 3D?

 

00;19;42;18 - 00;20;12;01

GD

Yes. Our process typically starts with a three dimensional model of the building that we get to a comfortable point. We utilize sketch up primarily for a design tool in the schematic phase. And once we're happy with the sketch model, we move into 2D drawing. This project was done a few years ago before our office implemented Revit, but we were still able to successfully document how all the masonry patterning was working in 2D.

 

00;20;12;04 - 00;20;16;29

DP

So did you show the three dimensional model to the clients along the way?

 

00;20;17;06 - 00;20;42;27

GD

We did. We had a number of options for this projects. They were all similar in the materiality, but some were maybe a little more traditional, others were even more contemporary looking. So we utilized the 3D models as a design tool to visualize the project to the client. And in the end they were very happy with one of the options we chose, which had very minimal changes that they needed to see.

 

00;20;43;00 - 00;20;47;25

DP

Clients love 3D models, right? Were you able to model any of the BRIC in SketchUp?

 

00;20;47;27 - 00;21;17;18

GD

We built the SketchUp model and applied some custom made material swatches that we built utilizing other brick colors, and we made sure we could match exactly what the Stonington gray velour would look like. And then it was just a matter of scaling the pattern down to the brick unit. So even in the areas where you have these dimple patterns that read against the entryway walls, all of the patterns were aligned perfectly to align up with the massing recesses that took place in the model.

 

00;21;17;18 - 00;21;19;20

GD

So it ended up being pretty successful.

 

00;21;19;22 - 00;21;23;26

DP

So how many people worked on the team for the project from the architects office?

 

00;21;23;28 - 00;21;40;10

GD

I would say that through the design process there were at least four of us that work through the design concepts together and I would say primarily one designer and myself kind of pushed the design to where it is now. But back when we did the project, it was a pretty collaborative effort within the office.

 

00;21;40;13 - 00;21;48;08

DP

So I feel like every project I learn something new. Did you guys learn anything through the process of working on this project?

 

00;21;48;11 - 00;22;11;06

GD

We learned quite a bit, especially in terms of the brick detailing here. We kind of learned that certain patterns have rules around them, especially when you're utilizing like a stacked pattern where you have these very clean vertical lines that need to be maintained. It's tricky to make sure that things don't read as a mistake within that patterning, especially as it relates to where you put windows.

 

00;22;11;08 - 00;22;31;10

GD

So we had to make sure our window spacing was just right. So you didn't results in little slivers of brick that would be noticeable and read as a mistake. So we took a lot of care in making sure that the tolerances and the actual window sizes and everything were worked in to make sure that we didn't end up with those kind of conditions.

 

00;22;31;12 - 00;22;45;08

DP

And that takes some pretty close work with the. Mason You mentioned that you thought the execution worked out well. Did you guys have a tough time finding a mason or was the first mason you guys ended up meeting the person you used.

 

00;22;45;10 - 00;23;11;22

GD

So the general contractor, it was his team, really. And the mason that he chose and started the project with kind of nailed it right from the start. We had probably two or three on site meetings with the Mason, looking at the drawings. That's a back and forth with some questions. And then ultimately we had a small mockup in the field and everyone was on the same page and collectively in the room together to make sure that the execution was going to happen just right.

 

00;23;11;22 - 00;23;12;18

GD

And it did.

 

00;23;12;20 - 00;23;40;09

DP

So last thing I wanted to ask you about was the metal panels on the fourth floor and these large bay windows on the outside edges of the building. Really beautiful. These are great details. You see these bay window details everywhere on 1930s and forties, city architecture. And I think doing that on the ends of these buildings and then adding the flat lock metal panels to the fourth floor is really beautiful.

 

00;23;40;11 - 00;23;41;19

DP

Great detail.

 

00;23;41;22 - 00;23;59;21

GD

Yeah. So back to kind of the challenges of working in Philadelphia and not a lot of space to work with. The bay windows are always a tool to add a little bit more interior square footage, but the challenge is always Hadia clad them. How do you make them feel appropriate when the rest of the facade material is masonry?

 

00;23;59;23 - 00;24;29;00

GD

Yeah, we kind of struck a line with a traditional meets contemporary bay esthetic to compliment the window patterns within the masonry as well. So the bays have very kind of glassy windows, wrapping all sides in the same style of windows as the punched openings within the flanking brick masonry and then the color of the bays being much darker than the masonry was meant to draw more attention away from the bay and actually focus it on the adjacent brick masonry.

 

00;24;29;02 - 00;24;48;17

DP

One more comment or question. These entry portals are beautiful. Was it tough for you guys to decide? Okay, we're going to set back the front door and these very large windows lose a little bit of square footage, but we get these entries which are highly differentiated on the facade or along the facade.

 

00;24;48;20 - 00;25;11;06

GD

Yes. So the entry portal was a result of trying to solve a problem around the narrow sidewalk. The city only allows you to project so far into the public right of way and you're trying to make this nice prominent entrance for this luxury townhouse. And in order to achieve a wide staircase going up there, you got to kind of recess the frontage of the building.

 

00;25;11;06 - 00;25;31;25

GD

So we accomplished that by recessing just the entryway that the ground floor. When I mentioned being in the floodplain, we had to get the first floor up pretty high. So the entry door is actually at a middle landing between the garage level in the first floor. The first floor is actually up about ten feet above the sidewalk. So we recessed the entryway.

 

00;25;31;25 - 00;25;40;02

GD

It allowed us to have four or five foot wide steps leading up to the front door and a nice prominent procession up the steps to the front door of the house.

 

00;25;40;09 - 00;26;03;15

DP

Well, Gabe, it's a beautiful project. When I first saw these photos, I was really excited to do this interview. So I have done so many different things in my career while being an architect. And while it's not that unusual, I've found that being an architect has helped me to be good at lots of other things in my life.

 

00;26;03;18 - 00;26;30;10

DP

The other thing that I will say is that we end up working on many different things in our lives, even if we're let's say you end up doing stair details for a large firm for ten years and you think I wasted all that time doing stair details. The reality is we never really know when any of the things that we learn how to do will come in handy and can ultimately change our life in some way, even if it's in a small way.

 

00;26;30;10 - 00;26;45;28

DP

So I think it's really cool that you got your real estate license because you made all of these relationships or just a couple relationships that ultimately helped you become a successful architect. It's a big deal, right? So I don't think you give yourself enough credit.

 

00;26;46;00 - 00;27;04;16

GD

Yeah, I think I realized early on that I was good at some things, but not good at everything I needed to be good at. So the relationships were everything, especially in the early days. So knowing when to reach out to the people who know the solution is a big part of being an architect, a big part of being an entrepreneur.

 

00;27;04;16 - 00;27;22;22

GD

Starting a business as well is, you know, you need to do it right. You have a license that you got to hang your hat on. So it's critical for you to understand when it's time to reach out for design professionals outside of your purview and outside of your profession for the right solution to problems on your projects.

 

00;27;22;24 - 00;27;29;20

DP

So, Gabe, it's been great to have you here. Thanks so much for your time. Where can people go to learn more about No more architects and yourself?

 

00;27;29;22 - 00;27;44;25

GD

Sure. So our website is pretty current websites WWE and gnome arch dot com genome RC. I would say even more current than that is our Instagram account, which is also at Gnome Arch.

 

00;27;44;28 - 00;27;47;19

DP

So one more question. Where did you get the name?

 

00;27;47;21 - 00;28;09;22

GD

The name actually came from a rebranding exercise that we did back in 2018 and we were looking to create a new identity that spoke to the residential nature of our products and we wanted to kind of speak to the home and a place of being. So the gnome, the garden gnome is a character that does that. It's the marker of place.

 

00;28;09;22 - 00;28;35;29

GD

We also wanted the branding to be very memorable and approachable, so we initially kind of wrote off a name that came to us from our rebranding company and we thought it was crazy. And the more rounds of more names they suggested to us, the more we came back to that first stab of GNOME being the solution and so happy that we trusted in the company that we rebranded with and it's worked out for us very well.

 

00;28;36;05 - 00;28;37;25

DP

It's a great story. Well, thanks again, Gabe.

 

00;28;38;00 - 00;28;41;13

GD

Thank you.

 

00;28;41;16 - 00;29;05;01

DP

Thanks for listening. If you learned something today, share this episode with a friend and give us a rating and review on Apple Podcasts to help others find the show. If you want to find out more about today's project, visit Glengarry com forward slash design dash vault that's gleaned GSR y dot com forward slash design dash vault one even more inspiration.

 

00;29;05;01 - 00;29;28;24

DP

Take a look around Glengarry icon while you're there. Glengarry is one of the nation's largest brick manufacturers and an industry leader for its diversified product line of more than 600 brick products with inspiring photos, useful resources, easy search tools, helpful design studios, and more. I'm sure you'll find the inspiration you need to stretch your imagination

TRANSCRIPT

 

00;00;00;00 - 00;00;05;13

Doug Patt (DP)

Let's go inside the vault. The design vault.

 

00;00;05;15 - 00;00;28;26

Christa Waring (CW)

It's only exterior work. Right now, we've just mobilized to start the brick restoration. We had great assistants getting a perfect match to the original white glazed brick that they have there. You want to make sure when you're doing this much brickwork that your spackle is right, and it doesn't stand out in the end. And Landmarks approves the work very easily.

 

00;00;29;03 - 00;03;30;29

DP

This is my guest, Christa Waring. I'll share more about her shortly in this episode from The Design Vault. We highlight Christa's project in New York City, 650 Park Avenue. 650 Park Avenue is located in the Upper East Side Historic District, built in 1963 and designed by Emery Roth and Sons Architects. It's a 21-story apartment building with a white glazed brick facade and setbacks above the 16th floor.

The base of the building maintains the building line of Park Avenue. Recent façade examinations revealed a deficiency in the wall tie system that connects the face masonry to the backup concrete block masonry. CTA designed a program of facade repairs that include face masonry pinning in addition to the restoration of all shelf angles across the façades. The original construction features have finished glazed edge over all the window lintels, which has an impressive impact on the esthetic of the building. Thus, the project entails an extensive masonry rebuild where matching the existing brick is of paramount importance.

Hi, I'm Doug Pat, and this is Design Vault.

Christa Waring is a principal at CTA Architects, P.C. in New York City. She's been with the firm since 1994. She received her Bachelor of Architecture from Pratt Institute. She's passionate about sustainable design and has a keen understanding of building code and zoning issues.

Christa drives her office's environmental research and implementation of green technologies, which includes adherence to lead and certified passive House design standards. She's worked on some of CTA's largest projects, including the 90,000 square foot mixed use Lower East Side Girls Club, Arabella 101, and the Grand Street Guild. Her recent projects include the award-winning exterior Preservation of the Cast Iron Facade at 54 Bond Street.

She also recently oversaw the completion of the conversion of an illegal SRO into low-income housing on the Upper West Side. One of her current projects includes a building rehabilitation project that's part of the New York State Energy Research and Development Authority's Retrofit New York pilot program. Christa taught at Pratt Institute and lectured for the New York City Urban Green Council and the Northeast Sustainable Energy Association.

She's also a member of the New York City Department of Buildings Construction Requirement and Materials Committee, and the New York City Energy Conservation Code, Commercial Advisory Committee. So welcome, Christin. It's nice to have you with us today. So, tell us a little bit about CTA architects, P.C. in New York City. So where are you guys located in New York. What's the size of the firm? How long have you been around and what type of work do you do?

 

00;03;31;02 - 00;04;46;14

CW

Well, thank you for having me today. CTA Architects. We're located down in the Flatiron District, just a couple of blocks from the Flatiron. We have 60 plus employees at this point, including support staff. We do a variety of work in New York City. All of our work is focused in the five boroughs, frankly, mostly Manhattan. We do have Brooklyn and Queens, some in Staten Island, a couple in the Bronx.

But we originally started out in 1987 or so. We came into being around the time that the first facade laws came into effect. And so, it was something that we naturally fell into. And we have been doing that work ever since I've been there since 1994. Our founding partner, Doug Cutsogeorge was my professor at Pratt and hired me as an intern in my second year there, and I have been there ever since.

So, I was an intern. I typed envelopes that when we had typewriters, I fax things and then went out and did field measurements and climbed around on ladders and hung on scaffolds. And 29 years later, still there. And I've been a partner since 2014.

 

00;04;46;17 - 00;04;49;16

DP

Real quickly, tell me about these façade laws. What is that?

 

00;04;49;23 - 00;05;55;20

CW

You know, my business partner Dan, could give you, like, every single date and iteration, but I'll give you the gist, which is that terracotta fell off a building at Columbia University and that initiated a city response, which was at that time called Local Law ten, which mandated that all buildings over six stories have to be inspected every five years by a registered professional and a report submitted to the Department of Buildings.

So, at that point, all of the buildings submitted on the same day, February 21st, every five years, and as the law developed, it keeps developing based on things that have happened in the city. At that point, it was just the street elevation and you just had to look at it with binoculars. Now it's the entire building and you have to look at it from a hanging scaffold or a bucket truck. And depending on the construction type, you have to open probes through the face masonry to expose what's in the cavity.

 

00;05;55;25 - 00;05;59;20

DP

Wow. So, the incident at Columbia was that in the early eighties?

 

00;05;59;21 - 00;06;09;27

CW

That was in the early to mid-eighties. So first it was Local ten and then it was local Law 11. And now it's called the Façade Inspection Safety Program.

 

00;06;10;05 - 00;06;14;05

DP

So, it sounds like a good thing. They're now inspecting buildings for this very issue.

 

00;06;14;12 - 00;06;25;23

CW

Right. And now they broke up the buildings. There are three sub cycles, so not every report for every building in the city is due on the same day. So now it's broken up. So that makes it a little easier.

 

00;06;25;26 - 00;06;32;12

DP

So, tell us a little bit about yourself. So how long have you been a practicing architect and what's your role in the office as principal?

 

00;06;32;19 - 00;06;53;26

CW

I got my license in 2003, But, you know, obviously I was working for the nine years before that. Currently, as principal, I do a lot of things. I wear a lot of hats. I yell at contractors, I hold clients’ hands and bring in work and put out fires where I need to.

 

00;06;53;28 - 00;06;55;02

DP

Do you like your job?

 

00;06;55;04 - 00;07;08;05

CW

I do. It is challenging. It's a lot. You have to really want to buy into it and invest. My partners, I've been with them almost 30 years. They're family and it's a good place to be. They're good partners.

 

00;07;08;12 - 00;07;11;15

DP

That sounds like a really interesting niche market.

 

00;07;11;17 - 00;07;33;01

CW

It is. And it's funny because, you know, there are a few firms in the city that do this, and we all know each other, and then we all get offshoots from employees have left and hung their own shingle and proceeded to sell focus and exterior restoration work. I would say it's about 70% of our work is exterior restoration.

 

00;07;33;06 - 00;07;38;04

DP

Gotcha. Let's talk about 650 Park Avenue. So how did you guys get the project?

 

00;07;38;06 -00;08;21;11

CW

So, I think, like everything in my history at CTA, it was word of mouth. It's kind of a tangled web. So, we use a consulting engineer who was working on a project out and Garden City, Long Island, and they needed an architect. So, he referred me to the owner, and the owner liked us and then brought us on to some of the more buildings that he owns in Brooklyn.

And then they were going around and around with their facade issues at the building that he lives in. And so, then he brought me in over there. So, it was all this chain. I always say, you never know who you're talking to when you're going to run into them again, who they are, who they end up being. To you and professionally. So that's how we got brought into the building.

 

00;08;21;18 - 00;08;29;07

DP

That's really interesting. So, could you give us a little history of the location? So, what was there prior to 1963, if you know?

 

00;08;29;13 - 00;08;43;23

CW

I do not know what was there prior to 1963, but it is a typical white glazed brick building of that era with the wedding cake setbacks. Also, during that construction period, the kind of problems that you find typically in that construction.

 

00;08;43;26 - 00;08;50;06

DP

So, the scope of the project then was only exterior work. Do you guys too any renovation work on the interior?

 

00;08;50;13 - 00;09;05;21

CW

It's only exterior work right now. We've just mobilized to start the brick restoration and we are going to visit with landmarks, redoing the ground floor, the base of the building as well.

 

00;09;05;23 - 00;09;07;20

DP

So, the project is currently underway.

 

00;09;07;26 - 00;09;08;24

CW

It's just started.

 

00;09;08;24 - 00;09;09;06

DP

Just getting rolling.

 

00;09;09;06 - 00;09;11;04

CW

Just getting rolling. It's exciting.

 

00;09;11;11 - 00;09;18;05

DP

So stylistically, the setbacks on those building that's due to the new laws in New York City at the time.

 

00;09;18;09 - 00;09;21;25

CW

Yes, those were due to zoning.

 

00;09;21;28 - 00;09;35;22

DP

Project restrictions - so when you guys are working on an exterior facade, what are the rules of the road? How do you guys end up doing a project like that? I would imagine that the exterior is all scaffolding at some point. What does the city make the contractor do?

 

00;09;35;24 - 00;11;06;28

CW

Okay, so first we started this project with, I would say, upwards of a hundred probes through the face masonry to really define what the issues were, because there was some debate over the extent of the repairs that were necessary. So, I spent a lot of time on the scaffold in the summer of 2022 looking at all the probes and really identifying the same repetitive problem over and over again.

We're just getting mobilized with hanging the rigs and part of all that entails is we had to file drawings at the Department of Buildings to get our permits and landmarks. Landmarks has to approve first, and we had great assistance getting a perfect match to the original white glazed brick that they have there. You would be surprised at how many iterations of white glazed brick there can be, but you want to make sure when you're doing this much brickwork that your speckle is right and it doesn't stand out in the end.

And Landmarks approves the work very easily. We didn't have any issues. I submitted to them the chip that we had custom made for the building. So that was great. To mobilize, the contractor has to pull scaffold permits, so he has to file with the city to install hanging scaffolds. There was already a sidewalk shed in front of the building to protect the pedestrians on the street. It's a corner building, so a lot of sidewalk shed that's been there for a while.

 

00;11;07;06 - 00;11;11;19

DP

So, let's back up. How did they know they had a problem? There were bricks falling off the building.

 

00;11;11;26 - 00;11;24;06

CW

It originally came up in a small exterior restoration project before our time that someone identified that they had a problem, and then it just kept developing from there.

 

00;11;24;10 - 00;11;29;05

DP

And how many sides were that exposed? Two or three. I understand it's a corner. Does it have a back side?

 

00;11;29;10 - 00;11;35;18

CW

Actually, it's L-shaped in the back. It has a number of large façades. It has the two large corner facades.

 

00;11;35;20 - 00;11;39;26

DP

So, the building's L-shaped and plan to then open up to a courtyard and-

 

00;11;39;26 - 00;11;40;05

CW

It does.

 

00;11;40;06 - 00;11;44;26

DP

Okay. How long does the project then take? Start to finish on a building this size?

 

00;11;44;28 - 00;12;12;26

CW

So, we're looking at completion in February of 2025. So, it's going to be about a year and a half on the ground. We have to install all of the pins. We have to pin the face masonry back to the backup block, which is a retrofit wall tie and first they pin and then we're going to strip all the shelf angles above and below the shelf angle and address the flashing and repaint the shelf angles.

 

00;12;12;26 - 00;12;22;12

CW

And sometimes we'll have to replace some of the angles and rebuild the masonry. And we have some parapet work to do, parapets that are not in good shape.

 

00;12;22;14 - 00;12;35;16

DP

So just so I understand that. So, they put up the scaffolding. Then you end up spending a bunch of time out there. I would imagine your partners are also out there. What I'm getting at is who identifies the structural issue? Who's the expert? Is it the architect?

 

00;12;35;24 - 00;12;36;27

CW

Oh yes, I did that. Yep.

 

00;12;37;03 - 00;12;45;06

DP

Interesting. You then document those issues in drawing form, like two dimensional drawings or 3D drawings and present them to somebody.

 

00;12;45;11 - 00;13;13;02

CW

Yes. Two dimensional drawings and photographs. I think the photos really speak a thousand words on this one. I presented it to the board. It's a condominium, so they have a board of directors and we met with them. I went over what I saw and the resident manager there was also very helpful, and he understands the situation and saw some of the probes that were open, that were closer to the ground and could confirm what we were telling them.

 

00;13;13;05 - 00;13;25;13

DP

So, you put together a set of drawings and is that priced like a typical architectural set of drawings by a GC? Is it then bid out and the lowest bidder is chosen? What's that process look like?

 

00;13;25;19 - 00;14;52;03

CW

So, we put together a set of drawings and construction details because we had opened so many probes, there were no questions. A lot of times when you work on a building and there are no existing drawings, which is probably 90% of the time for us, you're making assumptions about how things were built in the period of the building, right?

So inevitably you open it up and there's a surprise, sometimes a minor surprise, sometimes not so minor surprise. But this one, because we had had so many probes opened, we were able to really pin down what was behind the wall. So, we put together elevations, construction details and written specifications. We put them out to bid like the architects having a niche market in exterior restoration in New York City, there are also contractors who are a niche market for exterior restoration in New York City.

So, we bid to five or six or seven of those guys, the majority of whom I've known for many, many years. You know, we all work on the same stuff, and they select the bidder. Because it's private, it doesn't have to go to the lowest bidder. You know, we usually have an interview process so that the board can meet the contractor and get their feel for if they're a good match, that they're going to be a good match with building staff. So we go through the bidding process and then the contract is awarded and they do all that legal stuff on the side that I don't have to worry about.

00;14;52;08 - 00;14;58;04

DP

So, you guys do two dimensional drawings, details, any 3-D stuff? Not really necessary.

 

00;14;58;04 - 00;15;00;03

CW

Not really necessary for this type.

 

00;15;00;03 - 00;15;03;21

DP

And how many people end up working on one of your projects like this one?

 

00;15;03;24 - 00;15;11;00

CW

So, on this project, it was myself, our project manager, Freddy, and his staff member Arefa.

 

00;15;11;06 - 00;15;24;25

DP

So, let's get into the details. How does this work? Like, how do you do what you're doing? Are you just replacing bricks in specific areas? Are you replacing entire facades? And what does that detail look like?

 

00;15;24;28 - 00;15;33;29

CW

So, in the scope that we settled on, we are replacing the bricks along every shelf, angled the building, and this building has shelf angles that every floor.

 

00;15;34;02 - 00;15;36;11

DP

Explained to us what that is, a shelf angle.

 

00;15;36;13 - 00;16;11;02

CW

This is a concrete framed building. So, it has a concrete structure, and a shelf angle is a continuous steel lintel basically that holds up the masonry at every floor and it's bolted back to the concrete slab at regular intervals. There are shims and bolts, and it holds the slab in there. It holds the brick at every floor, provides the gravity support, and the wall ties provide lateral support. So, the shelf angles that this building were in very good condition. There are a few issues here and there, but nothing terrible.

 

00;16;11;02 - 00;16;11;20

DP

They’re all steel?

 

00;16;11;25 - 00;16;18;08

CW

They are steel like three by three, 4x4 angles. Some of them were shallow. So, we're making them a little deeper.

 

00;16;18;14 - 00;16;20;04

DP

Were they galvanized or painted?

 

00;16;20;09 - 00;16;46;03

CW

The original ones were not. They were painted. But when we go back, we go back with galvanized and stainless-steel bolts, and then we replace the shims and the bolts, obviously. And where we find a length of deteriorated shelf angle, we will replace that. We have an allowance for that in the contract to deal with that because there were some areas higher up on the building where they get, you know, more weather exposure that we're in worse condition.

 

00;16;46;05 - 00;16;49;10

DP

Tell us a little bit about the brick. How did you get the matches?

 

00;16;49;17 - 00;18;25;21

CW

Fortunately, this building hasn't had any huge projects on it, so it was fairly easy to identify which white glazed brick was the original brick, which was good because there were maybe three different bricks on it, different color, white base. You know, one was a little pink, one was a little white, or some had a brown speckle, some had a fine speckle, some had a varied speckle.

So, because there are so many setbacks, we were able to go to somebody's terrace where there hadn't been any work high up on the building because at the base at stone. So, I'm not comparing it at the base of the building. We also walked along the sidewalk shed because that gets you up higher. And we selected - we were like, okay, this is the original brick.

And then I reached out to King's. They are brick distributors in New York City, and the folks there were super helpful and made me all sorts of custom samples and they have little brick chips and brought the brick chips up to site and went through everything with the resident manager and decided on our brick. And then you mentioned in your intro the finished underside of the brick at all of the window lintels.

So, when you have a shelf angle you don't see in the field of the masonry, you don't see the underside, the clay body of the brick. But over the lentils you can see like the little yellow clay body of the brick. And I really got into the fact that it was finished on the underside. I think it's just a little bit like a perfect little thing that I really liked. So, we asked for that as well.

 

00;18;25;23 - 00;18;29;11

DP

Is that like a space that's about a half hedge, three quarters of an inch wide?

 

00;18;29;14 - 00;18;43;10

CW

Yeah, it's about a half an inch. If you have the right amount of bearing. And so, they put the glaze on the underside. So, the Masons have to be aware, obviously, when they're rebuilding to look for that. I'm sure I'll catch some in the beginning before they get used to it.

 

00;18;43;18 - 00;18;45;13

DP

Is it going to be hard to find a good mason?

 

00;18;45;19 - 00;18;51;10

CW

We have the contractor on board, and he has good masons on hand, so I'm not very worried about that.

 

00;18;51;16 - 00;19;01;08

DP

So, did you guys learn anything interesting through the construction process, through the inquiry process, anything unusual, Anything you'd never seen before?

 

00;19;01;14 - 00;20;11;10

CW

Not anything I've never seen before, thank goodness. Because those are never good surprises. I was happy, given the lack of wall ties, that I was happy to find that the backup masonry was still in good condition. We didn't have to worry about the backup masonry because that can also be an issue. We decided to pin the columns, which I was surprised actually worked because I had never pinned columns before because you're pinning into the concrete.

So, when you do the retrofit wall tie, you can call the manufacturers rep and he'll come out and do a test. He'll drill in the wall tie, and then he has like a crank to see what the force is, to see if the tie actually holds. And I had originally planned to strip all of the column locations in the building and rebuild that as well.

But on another project of mine, we had had pull tests done for retrofit pins on that building and they went into the columns, and I was like, wait, what? I didn't think that could happen. So, we called them out. We had had him do the tests in the field, in the masonry before, but we had him come back and do the pull tests and the columns and the pins drilled right in. So, it was great news.

 

00;20;11;17 - 00;20;15;13

DP

So, these are columns on the exterior facade behind the brick masonry.

 

00;20;15;16 - 00;20;31;04

CW

Right there, directly behind one wythe of brick behind the masonry. So, the backup concrete block goes right to the column. And then if you were to take all the face masonry off the building, you would see a grid of the columns with the backup block in between.

 

00;20;31;06 - 00;20;38;00

DP

And all the residents there. Do they get to live through the construction process?

 

00;20;38;02 - 00;21;04;06

CW

They do...Yeah. It's never pretty. It's just not. I feel bad, but there is going to be a lot of saw cutting, which is dusty. There is going to be a lot of drilling, which is loud. So, I hope that people at 650 Park, if you're listening, maybe you go back to working in the office for a while. What we do is loud and not anything that anyone wants to have to hear all day long if they're home.

 

00;21;04;08 - 00;21;08;02

DP

Back to the building for a second. I'm really surprised there were no drawings.

 

00;21;08;03 - 00;21;13;06

CW

We did have some the building super. The resident manager had some drawings.

 

00;21;13;08 - 00;21;21;10

DP

Yeah. What's always amazing. I mean, to go back further than that, people-built buildings from so little information, right? I mean, it's crazy.

 

00;21;21;14 - 00;22;05;26

CW

Yeah. So, we didn't really find any wall details. We had elevation drawings and then there's always elevation drawings, probably some plans and lots of plumbing drawings and mechanical drawings, which I don't need and are never accurate because they never built it that way anyway. And it was sixty years ago. So, lots of things have changed. So, we did go through the resident manager's giant bin of drawings in the beginning and got what we could use and it was helpful.

I mean, it helped us locate all of the columns along the facade, right? We wouldn't have had that if we didn't have the original drawings. It would have been more of a guess. But like in this project I said was knock wood a lot of guesswork so far.

 

00;22;05;29 - 00;22;16;02

DP

Yeah. And you talked a little bit about existing conditions and drawings. Is that something that you still do, do some existing condition sketches when you're out there and then somebody'll draw it up for you or.

 

00;22;16;09 - 00;22;56;00

CW

Oh absolutely. That's part of the process. You know, I went to site one day with my notebook and my pen and the contractor said, well, the girl who came last time had an iPad. And I said, I don't have an iPad. I have a notebook and a pen. They tried to give me an iPad, but I'm just more comfortable sketching it.

I feel like there is a connection between pencil and paper that makes you understand what you're looking at and what you're drawing. I don't know. When you go to architecture school, you don't really know anything when you start. And I started to understand through drawing, and I went to school in the era where there was no computer drafting.

 

00;22;56;00 - 00;22;56;16

DP

Yeah, I experienced the same thing.

 

00;22;56;21 - 00;23;13;25

CW

Yeah, I feel like there's a real connection and I think, you know, a lot of times there's an assumption that the computer program is the be all, end all. Not that just a tool and people don't really sometimes don't understand what it is that they're drawing because the computer's creating the detail.

 

00;23;13;28 - 00;23;15;14

DP

They miss it in the learning process.

 

00;23;15;19 - 00;23;35;24

CW

Yeah. And because we do what we do, that's not something that they teach. They don't teach that at school. I actually didn't have to take construction documents in school because I got credit for my job because I was doing actual construction documents. I worked full time. I went to school part time. So, it took me a very, very long time to graduate.

 

00;23;35;26 - 00;23;37;09

DP

Wow, that's impressive.

 

00;23;37;11 - 00;23;37;22

CW

Yeah.

 

00;23;37;29 - 00;23;42;20

DP

Christa, was sustainability an issue for you guys when you took on the project?

 

00;23;42;27 - 00;24;46;20

CW

Unfortunately, with this project, given the parameters of the scope, we could not really accomplish the integration of additional insulation in the cavity or something to that effect, moving forward, but in our office, we really focus on the concept of maintaining existing buildings and doing rehabilitations as sustainable practice. We have a sustainability coordinator that we brought on about two years ago.

She's fantastic. She keeps us honest. She's always regulating things, making sure we're composting, taking things out of the garbage can and putting them in the compost. We did a full led switch over on our lighting in the office pushed by her. She's changed our specs, you know, she'll give me and my partner Dan markups on the specifications with suggestions and we integrate that into our specifications. We do have a sustainable component in every job and some jobs, we can take it to a whole other level.

 

00;24;46;27 - 00;25;03;03

DP

Yeah, it would seem to me that have to go to the interior, right, and rip out all of the plasterwork and drywall and then reinsulate. So, I'm curious, a building like that, it gets a new facade, but it's not going to really change the R-value of the walls and it's still probably going to be a cold building.

 

00;25;03;06 - 00;25;28;21

CW

Right, there is that. And then a lot of times people say, well, I can put in these super-duper windows. And I'm like, Yeah, but your walls are not insulated at all. And you have a PTAC unit, which is basically a hole in the wall. So, you have to look at the balance of how to accomplish what it is you need to accomplish. But we look at the materials and the VOCs, and the location where things are made as well plays into sustainability.

 

00;25;28;21 - 00;25;29;29

DP

Yeah, it is what it is.

 

00;25;30;00 -00;26;06;06

CW

Yeah. I was on the Energy Code review Committee, as you mentioned, the advisory committee, but one of the reasons I signed up for that is because it does not answer existing buildings to the extent that I think it should, given that it's the New York City Energy Code and there's still some gaps in there. But, you know, we're conserving these buildings, we’re restoring them, we're not tearing down and building new ones.

And so that's good for the environment. But then how can we make a realistic energy code that you can apply to all of these existing conditions that we can't just change?

 

00;26;06;09 - 00;26;09;13

DP

I think it's wonderful. It's something most people don't think about.

 

00;26;09;20 - 00;26;38;04

CW

They don't know. And I lectured for Urban Green on the Energy Code. I gave a scintillating seven-hour long lecture. I ran out of words, though, during COVID, I couldn't do it on a screen. So, I tell my kids I ran out of words because there are a lot of words, but I think even sometimes the people that I was lecturing to depending on, you know, like you said, a normal architecture firm isn't thinking about this stuff because they're not dealing with existing building. They're dealing with a plot of land.

 

00;26;38;06 - 00;26;59;27

DP

So, Christa, you've been an architect for some time. Based on what you know today about being an architect, do you have any words of advice for either your younger self or young architects coming up? Because what you do is a little different - the 70% of the work that you guys do - is really very different from what many architects end up doing when they get out of school.

 

00;27;00;05 - 00;27;33;04

CW

One word of advice is not to be too married to the thought of what you think you want to do and to try different things, and you might really find something that surprises you, that you do. I've found along the way I've done some projects I would never imagine when I was in school that I would do something like that, and I really enjoyed it.

When you go to school, you have a vision, I'm going to do this. I want to do this. And if you just open yourself up to different projects and you might find something that really makes an impression on you.

 

00;27;33;11 - 00;27;35;23

DP

Yeah. What clearly worked for you?

 

00;27;35;25 - 00;28;13;05

CW

Yeah. And to my younger self, I don't know that I have advised my younger self because I don't know how much I've changed, but I always felt like if you're doing what you enjoy and you're with people that you enjoy doing it with, then little things that might be irksome to contemporary youth don't really register. They're not important in the long run, and you have to see the big picture.

I mean, did I think when I was hired, did I think when I was 23, someday I’ll own the company? No, I didn't think that, but it happened. So you never know. Hard work and a lot of luck is what gets you where you want to be.

 

00;28;13;10 - 00;28;19;29

DP

Christa, it's been great to have you here. Thanks for your time. Where can people go to learn more about CTA architects and yourself?

 

00;28;20;02 - 00;28;44;21

CW

We have a website. It's www.ctaarchitects, all one-word dotcom where we showcase all of our finest work. Sometimes people look at our website and get a little, oh that's very fancy, but I always say it's your portfolio, it's your best, but there's everything in there. There's all this stuff that we do that doesn't make it to the portfolio level that's necessary.

 

00;28;44;24 - 00;28;46;15

DP

Well, thank you very much. Been great to have you.

 

00;28;46;19 - 00;28;51;09

CW

Thank you for having me. It was nice talking.

TRANSCRIPT

00;00;00;02 - 00;00;05;09

Doug Pat (DP)

Let's go inside the vault. The design vault.

 

00;00;05;11 - 00;00;30;15

Ross Padluck (RP)

What we did on the inside was opened the living room, the dining room and the family room in the back with these pocketing doors so that when the doors are closed, you can have these very private moments in the house. But when they're entertaining, the series of pocket doors opens up. So the property is really open from the front terrace into the living room, dining room and the yard in the back so you can kind of open the house up front to back, or you could close it down from more intimate settings.

 

00;00;30;17 - 00;03;44;04

DP

This is my guest, Ross Padluck. I'll share more about him shortly. In this episode from the Design Vault, we highlight an Italian art Deco private residence designed by Ross. The private residence we're discussing today is located on a narrow urban lot in a neighborhood which includes many homes from the 1920s. These homes feature various elements of brick and stone cladding combined with tile roofs and decorative windows.

 

The new home was inspired by the Italian art deco movement, as well as the German Expressionist. It draws from the work of Piero Portaluppi, a preeminent architect of streamlined art deco classicism in Italy in the 1920s and thirties. Other inspirations include German architects Fritz Hogar and Heinrich Muller, well-known for creative and experimental forms constructed with brick.

 

The exterior of the home is composed of details that decidedly complement the vernacular of the neighborhood. The construction palette of masonry includes brick, lilac sandstone, black windows, black slate and copper. Interestingly, the brick shapes, which appear to be custom, are actually all standard Glen-Gery modules. The course work is detailed and unique. The leaded glass panels in the windows are restoration glass and the roof dormers are clad in copper.

 

The details of the house are mannerist yet subtle, and the brick is creatively patterned in coursed to give the house a unique personality. Hi, I'm Doug Pat and this is Design Vault. Ross Padluck is a registered architect and partner at Kligerman Architecture & Design in New York City. Ross has a Bachelor of Architecture degree from New York Institute of Technology, where he received AIA Henry Adams medal as valedictorian of the School of Architecture.

 

Ross’s passion for architecture started young. Back then, he remembers being fascinated with the historic homes of New England. He joined Kligerman Architecture & Design in 2010. His work has been featured in Architectural Digest, Lux Interiors, and Gallery. His firm is known for design, rooted in tradition, but modern in its sculptural forms, precise details, material integrity and liberal use of glass.

 

The firm still creates presentations by hand and uses the latest digital technologies, including 3D printers and VR. So welcome, Ross. It's nice to have you with us today. So tell us a little bit about Kligerman Architecture & Design in New York City. So where are you guys located in the city? What size is the firm? How long has it been around and what type of work do you do?

 

00;03;44;06 - 00;04;29;13

RP

Well, thank you for having me. Kligerman Architecture & Design, we’re actually just up the street from the Brickworks Studio. We're on the corner of 42nd Street and Fifth Avenue across the street from the library. We're in 505th Avenue, which is a Shreve, Lamb and Harmon Building which is, I guess, considered the sister building to the Empire State Building. They were built at the same time with the same architect and 505th was completed first before the Empire State Building.

 

And at the time it was the tallest building in the world. Before it was surpassed by its sister, the Empire State Building. We're about a 40 person architecture and interiors firm. We do high end residential architecture, mostly single family. We were known as Ike Kligerman Barkley when I joined the firm. We went through an ownership transition last year when I became a partner.

 

00;04;29;20 - 00;04;39;06

DP

Well, interestingly, as an aside, I do high end residential architecture. I worked with a gentleman named Joe Moore for about 20 years. He's up in the Greenwich area.

 

00;04;39;14 - 00;04;40;27

RP

Okay. That's a great neighborhood.

 

00;04;41;02 - 00;04;48;24

DP

Yeah, that's really cool. So tell us a little bit about yourself. So how long have you been practicing architecture and what's your role in the office as partner?

 

00;04;49;01 - 00;05;20;11

RP

I always knew I wanted to be an architect. Since I was in preschool. I was sort of drawing houses and building them out of blocks when I was in preschool. So it was just a natural career. And I come from a family of architects, so it just sort of all made sense. My first job actually, I started of working for an architect when I was 14 years old.

 

Yeah, I did. After school drafting for an architect in high school and kind of had various internships and stuff from there at Kligerman, as a partner there, I run a studio, oversee probably about a dozen projects at the moment.

 

00;05;20;18 - 00;05;24;27

DP

Tell me about your family. Family of architects. That's interesting. Both mom and dad?

 

00;05;25;01 - 00;05;41;03

RP

No, my uncle is an architect who was a kind of huge influence and resource on me. And I have a cousin who's an architect and one is an engineer. I have another cousin who's a graphic designer. So there's this sort of creative energy in the family. My grandmother was a painter, too.

 

00;05;41;06 - 00;05;43;27

DP

That's really cool. I mean, architects are pretty rare.

 

00;05;44;01 - 00;05;50;05

RP

It's kind of a not a common profession in families, but it sort of comes naturally to us, I guess.

 

00;05;50;12 - 00;05;56;01

DP

Very cool. So let's dig in here and talk about the home. So how did your office get the project?

 

00;05;56;07 - 00;06;05;15

RP

So it's a community that we've done a lot of work in over the years. We have a long history of doing work in that community and it was a referral from another client that we got the project.

 

00;06;05;17 - 00;06;07;09

DP

So you didn't know the clients?

 

00;06;07;09 - 00;06;10;09

RP

Did not know them, but they were friends of one of our other clients.

 

00;06;10;16 - 00;06;13;06

DP

And what about the location? So was there a house there?

 

00;06;13;13 - 00;06;23;24

RP

There was a house there. It was sort of a turn of the century house that had been badly renovated in the eighties. You know, we were growing family and it was time for a new house. So they turned to us to design it.

 

00;06;23;28 - 00;06;32;13

DP

So the location, there are lots of homes from the 1920s era and are they still there and simply getting renovated or is it turning over?

 

00;06;32;16 - 00;07;03;27

RP

There's not many left, the kind of vernacular of that neighborhood. There were a lot of homes built in that sort of 1920s timeframe that were kind of brick and stone and had slag glass windows and tile roofs like you mentioned. And there's kind of very Spanish and Moorish ornate feeling to them. Unfortunately, a lot of them have been torn down.

 

They've been replaced with newer and larger homes, but there's still a few left in the neighborhood. And the neighborhood is sort of maintains that character, even though the homes have been replaced of the sort of 1920s buildings.

 

00;07;04;00 - 00;07;16;20

DP

So that ultimately did impact the esthetic of the home that you design. We'll talk about that in a little bit. So what was the scope of the project? That is, what were the programmatic requirements for the project?

 

00;07;16;23 - 00;07;31;06

RP

It's a single-family home, so it had to have entertaining space and living space on the first floor for them. They do a lot of in-house, entertaining large parties and then enough space for the clients and their children on a very small lot.

 

00;07;31;09 - 00;07;39;08

DP

Yeah. So what were the project restrictions in terms of the height of the building and the size of the building on the lot? Were they pretty stringent?

 

00;07;39;08 - 00;07;55;03

RP

Yeah. The zoning in that neighborhood is pretty restrictive, so you have to fit a lot into a very small envelope. So you have to be really creative of how you use floor space and how you configure the building envelope to fit within the zoning requirements and the floor area restrictions.

 

00;07;55;05 - 00;08;01;13

DP

And you couldn't go over two and a half stories or okay, so I nailed that. That was the restriction. Two and a half stories?

 

00;08;01;13 - 00;08;07;03

RP

There's actually not a restriction of stories, it's a restriction of height. So that's what limits how far you can go.

 

00;08;07;10 - 00;08;10;02

DP

And FAR restrictions, is that what they call them.

 

00;08;10;02 - 00;08;13;02

RP

Yea, floor area ratio, it's pretty tight there.

 

00;08;13;04 - 00;08;41;24

DP

So let's talk a little bit about the building design. Stylistically, we talked a little bit about this already, the Italian art deco influence and of course the reference that I made earlier to the German architects. Interestingly, I was looking at Portal Whoopi's work online. I know it sounds a little bizarre, but it almost seemed like a modern cross between Palladio and Boulay, right?

 

I mean, it's just the symmetry is gorgeous. Some of the buildings that this man designed were unbelievable.

 

00;08;41;26 - 00;09;16;27

RP

Yeah, they're really incredible. I've had the fortune of being in a few of them in Italy, and Porto Lippi was sort of off the radar up until a couple of years ago. And now it's, you know, there's all these books out about them and everyone's sort of looking at it. But he just did really incredible sort of forward thinking work in Italy in that timeframe that was still sort of rooted in tradition, not too dissimilar from the work that we do at the firm.

 

So it sort of just seemed like a natural influence for us. A lot of his work was urban, a lot of it was in Milan, so it sort of had that urbanity to it like this house does.

 

00;09;17;04 - 00;09;22;27

DP

So tell us a little bit about the building plan. Looks relatively straightforward, like a large rectangle.

 

00;09;23;05 - 00;09;52;11

RP

Yeah, the sort of narrow rectangular lots. So there's not much you could do with it. What we did on the inside was opened the living room, the dining room and the family room in the back with these pocketing doors so that when the doors are closed, you can have these very private moments in the house. But when they're entertaining, the series of pocket doors opens up.

 

So the property is really open from the front terrace into the living room, dining room and the yard in the back so you could kind of open the house up front to back or you could close it down from more intimate settings.

 

00;09;52;14 - 00;10;00;17

DP

That's a really nice idea for a relatively narrow house. Who came up with that idea where the client's like, Whoa you guys showed it to them and they thought, Wow, this is really neat.

 

00;10;00;24 - 00;10;05;14

RP

You know, they were really kind of happy with it. We sort of hit it on the first shot, I guess you could say.

 

00;10;05;21 - 00;10;08;28

DP

So how large was the team that was working with you on the.

 

00;10;09;00 - 00;10;11;25

RP

It was me and at the time, John Ike.

 

00;10;11;27 - 00;10;19;17

DP

So let's talk a little bit about the facade, which is very interesting. All brick, who decided on brick?

 

00;10;19;23 - 00;10;31;19

RP

It's the vernacular in that neighborhood. Just about every house uses brick or stone or a combination of them. The natural choice to use. So we wouldn't recommend anything else in that neighborhood.

 

00;10;31;26 - 00;10;33;02

DP

And what about the color?

 

00;10;33;05 - 00;10;39;26

RP

So we wanted to create something that was a little richer, a little darker, a little moodier. And that's how we ended up with that color.

 

00;10;39;28 - 00;10;59;28

DP

I want to back up a little bit. I always ask our guests about the town reviews, like how long that process took was a challenging historical neighborhood, that sort of thing. What did you guys go through in terms of presentation? So you meet with the client, you show more schematic design. Then ultimately you've got to go to the town and get this thing approved.

 

00;11;00;07 - 00;11;05;15

RP

There wasn't any sort of historic or architectural review board there, so it was just the building department.

 

00;11;05;21 - 00;11;12;22

DP

And in terms of zoning requirements, the building had to be relatively narrow rights for the setbacks. Were they restrictive or?

 

00;11;12;25 - 00;11;24;10

RP

Restrictive on the sides? The biggest challenge is the floor area, which is very restrictive. You kind of have to fit a lot into a very small footprint. So there's very little wasted space in the floorplan.

 

00;11;24;12 - 00;11;42;01

DP

So let's talk about the facade. What I loved about this house was the figuring in the brick, right? So there were all stock sizes and shapes used by your company and was that intentional? You didn't want to spend extra money having these custom shapes made?

 

00;11;42;04 - 00;12;16;04

RP

Yeah, we wanted to have that in mind of trying to do this with stock shapes. We wanted to do an all-brick house, which is inherently a little more expensive. And instead of doing custom shapes, we looked through the Glen-Gery catalog to see what was available, sort of quote unquote in stock that wasn't custom made. And then we took these different shapes and create a different patterns and modules with them.

 

And that's how we created those sort of columns that are between the windows. And we created that corduroy texture that's on the chimney all out of Glen-Gery shapes.

 

00;12;16;06 - 00;12;27;19

DP

Yeah, I found that really beautiful. The piers in between the windows are figured, right? So when you guys design that, did you ultimately do mock ups in the fields to see what these things looked like?

 

00;12;27;25 - 00;12;40;03

RP

We 3D printed the brick shapes and then sort of put them together almost like Legos to see what makes sense and what makes an interesting shape. And we did mockups on our 3D printer with those brick shapes to kind of lay it out.

 

00;12;40;10 - 00;12;52;27

DP

And what about some of this interesting coursing that I found as I looked around the exterior elevations, for example, at the entrance, right? The coursing above that entrance is almost done in a star shape or a crown like shape.

 

00;12;53;04 - 00;13;16;03

RP

Yeah, it's sort of a star shape or a crown, as you say. And we had originally designed that in stone, and the owner had wanted the house to feel a lot more monochrome. So I said, Well, why don't we do it in Brick? And it sort of created that crown shape out of, it's just modular standard brick that's laid at different angles and it sort of radiates around the arch to create that pattern.

 

00;13;16;10 - 00;13;19;06

DP

To remind me some of the other details on the house.

 

00;13;19;13 - 00;13;58;12

RP

The house is about that arch. It's the entrance. It's very subtle because it's all done out of the brick. It doesn't really stand out, but it's a detail that you notice right away just the way the mortar joints are run to create that pattern. And then we have, as I mentioned, the special piers between the windows, which are created of three different pieces of brick special shapes that create that.

 

And there is the chimney, which is the corduroy texture. We also used some of the sill pieces to create a water table or sort of base around the house. And then we experimented with different patterns of brick running bonds and stock bonds to create different patterns and sections of the house to break up the mass of it a little bit.

 

00;13;58;19 - 00;14;01;11

DP

And the dormer is done in copper, which is really cool.

 

00;14;01;16 - 00;14;15;03

RP

I like when Dormers feel like objects on a roof. I don't like when the metal roof comes out. So we created them to feel, you know, like these copper boxes sitting on the roof, which is a very German kind of mannerism of going about that.

 

00;14;15;05 - 00;14;23;16

DP

So on a project like this, it's obviously really important to find a good mason. So you guys clearly found somebody liked. What was that process like?

 

00;14;23;22 - 00;14;37;18

RP

We worked very hand-in-hand with the Mason to create that. You know, we're very specific about all these different patterns and layouts. So it was a lot of site visits and working one on one to make sure our vision came to reality on the house.

 

00;14;37;20 - 00;14;47;28

DP

So you were talking about having a 3D printer and making these that must have been a really fun process, right? I mean, that's like the awesome stuff that architects get to do.

 

00;14;48;01 - 00;15;02;08

RP

Yeah, it is. The 3D printer itself is kind of a pain to use. It's finicky, but once you get it to actually do what you want it to do, being able to just sort of create these shapes and put them together was really satisfying. That's sort of how we create our vision.

 

00;15;02;08 - 00;15;04;20

DP

Did you guys do the building in Revit?

 

00;15;04;26 - 00;15;09;13

RP

The building was actually done in CAD, believe it or not, all 2D.

 

00;15;09;17 - 00;15;11;00

DP

So no 3D renderings?

 

00;15;11;02 - 00;15;12;27

RP

Nope. Except for hand renderings.

 

00;15;12;29 - 00;15;14;29

DP

Is that pretty typical for your office?

 

00;15;15;02 - 00;15;38;11

RP

Most of our projects are in Revit now. For me, the intricacies of the house, I felt more confident doing it in 2D. It's just the way my brain thinks. I still think of old school drafting and that's kind of what CAD does. And the house was small enough that it was manageable. A lot of our other houses that are much larger than this, it makes sense to do them in Revit, but I felt kind of old school doing it in CAD, but it worked out.

 

00;15;38;19 - 00;15;42;14

DP

And did the clients get to see these little models, the little modules or?

 

00;15;42;18 - 00;15;50;21

RP

Absolutely. We showed them, you know, this is the pattern and these are the different shapes of brick and they got a kick out of it, but they were excited.

 

00;15;50;24 - 00;15;59;05

DP

Yeah, very cool. So, we talked about the size of your team. There were two people that worked on the project essentially and start to finish. How long does that take for your office?

 

00;15;59;13 - 00;16;19;23

RP

Search to finish a house of the skills is about three years. We're about a year for design from when a client first hires us to get through schematic design construction documents, permitting, all of that. And then construction is about two years, which seems like a long time. But our houses are very custom and we're doing very one off sort of things.

 

00;16;19;28 - 00;16;22;05

RP

It takes time, but it's worth it in the end.

 

00;16;22;07 - 00;16;31;08

DP

Yeah, you know, that process can be pretty interesting for people that haven't done it before, the clients. Have these clients been through a custom home before?

 

00;16;31;14 - 00;16;38;06

RP

Not to this scale. They had renovated a home before, but they hadn't built a home like this before, so it was a first time for them.

 

00;16;38;09 - 00;16;40;17

DP

Well, I'm sure that we're very happy, the house is beautiful.

 

00;16;40;24 - 00;16;44;01

RP

Thank you. They were very happy. So we did our job.

 

00;16;44;03 - 00;16;50;10

DP

Awesome. So the column in the front. Very cool. Reminds me a lot of Frank Furnace.

 

00;16;50;16 - 00;16;50;28

RP

Yes.

 

00;16;50;28 - 00;16;53;11

DP

Whose idea was that? Where did that come from?

 

00;16;53;17 - 00;17;15;21

RP

That was mine. We wanted to create something special on that corner. Since it is the main entrance to the house. And it was inspired by a lot of the work that Portaluppi did, where he uses more classical elements and we didn't want to do another piece of brick there. It was time to do some stone. It is solid lilac sandstone that's supporting that brick arch.

 

00;17;15;24 - 00;17;18;00

DP

So was that difficult to have made?

 

00;17;18;02 - 00;17;25;01

RP

We had it custom made, unlike the brick, we did have the column custom made. It was milled in Canada.

 

00;17;25;03 - 00;17;36;04

DP

Did your team learn anything interesting through the design and construction process? It's clearly a pretty unique home, so there were a few new things for you guys, I would assume.

 

00;17;36;11 - 00;17;55;25

RP

Yeah, I think working through the brick shapes and the course thing, we try and get Windows to line up with brick coursing or if the windows are off, you adjust the stone sills to make up for the difference in brick. And I think we learned a lot about just making sure that the brick lines up everywhere.

 

00;17;55;28 - 00;18;06;19

DP

So were there any instances of we drew it this way, but then you get in the field and you're working with a mason, They're like, no, you know, we're not going to be on course here and we're going to have to adjust things.

 

00;18;06;19 - 00;18;32;16

RP

There were a few instances where the cursing under the windows was ever so slightly off, but we were able to adjust that with the stone sills and make it work. I was very exact when I drew it to make sure that everything mathematically worked out just because the design was so important to us and to the clients, we really wanted to make sure you could actually build it the way we intended it.

 

The drawings were pretty precise, and that led to a fairly smooth construction process.

 

00;18;32;18 - 00;19;03;09

DP

That's great. It is one of the most important things to me. After the house has been designed, we sign up the GC, we get rolling on the project, the project managers get to know one another. This would be the architect and the project manager for the general contractor. Those first couple meetings between those two people are really important because at that point you get to spend a lot of time explaining, okay, this is why I drew it this way and I need you to keep this in mind when we build it, right?

 

00;19;03;16 - 00;19;25;09

RP

Yeah. We were fortunate to have a really good contractor. He was really a craftsman. Very hands on approach, like we have with design and construction. He understood our design goals for the house and the quality goals, he really paid attention to the details and worked with us throughout construction to make sure the vision was carried out.

 

00;19;25;11 - 00;19;37;20

DP

So Ross, before you go, you've been an architect for a little while now. Based on what you know about being an architect today, do you have any words of advice for your younger self or even young architects getting started?

 

00;19;37;22 - 00;20;11;11

RP

I do. You know, the advice is to stick with it. A lot of people that I went to school with did not end up pursuing a career in architecture. For me, it's something I love doing. I'm very passionate about it and it's not an easy educational process. It's not an easy career. I think a lot of people get discouraged by that, but if you love it and you care about it, just stick with it because it's very rewarding and we get to do really unique and special things.

 

There's not a day that goes by that I don't regret my career choice.

 

00;20;11;16 - 00;20;24;07

DP

Well, that's really cool. Being a high-end residential architect can be extremely challenging, but also very rewarding long term because you're working on a singular typology and you can get really good at it.

 

00;20;24;11 - 00;20;56;25

RP

Yeah, well, you're designing for the end user and you're spending their money. So it's a high stakes process, but it's also very creative and you get to work with unique materials and work with craftsmen and people who are really good at what they do. So in that respect, yeah, it's really rewarding and we're creating things that people and families are going to use for the rest of their lives.

 

They're going to live in them. They're going to have their friends over. As challenging as it can be to work in that environment, we're just creating such special things. It's wonderful.

 

00;20;56;27 - 00;21;02;03

DP

Yeah, I like to say that we've got to know a lot about a lot to be a high-end residential architect.

 

00;21;02;05 - 00;21;13;16

RP

Yeah, you have to be an architect. You've got to be a plumber. An extra installer, a lawyer, an accountant, a marriage counselor. You have to be everything. A materials scientist.

 

00;21;13;17 - 00;21;27;01

DP

I like that. Marriage counselor. Marriage counselor, for sure. My goodness. So Ross, it's been great to have you here. Thanks for your time. Where can people go to learn more about Kligerman Architecture & Design and yourself?

 

00;21;27;03 - 00;21;31;21

RP

Check out our klingermanad.com. And you can also look at our Instagram account [@kligerman.ad].

 

00;21;31;24 - 00;21;34;00

DP

And do you have your own Instagram account as well?

 

00;21;34;01 - 00;21;38;06

RP

Yes, that's @RossPadluck.