Appetizers and Cocktails will be provided.

Our events are open to architectural, design, and building industry professionals only.

Basics of Brickwork Detailing

Water penetration is responsible for many of the problems encountered in masonry walls today. The successful performance of a masonry wall depends on limiting the amount of water penetration and controlling any water that does enter the wall system. Water penetration resistance and control in brick veneer is the focus of this presentation. The concept behind the ‘brick veneer drainage wall’ is discussed in detail, as well as, the proper materials to specify in order to maximize a wall's water penetration resistance. The various elements and materials which make up a building are in a constant state of motion. All building materials expand and contract due to changes in temperature; some materials move with changes in moisture content. Each building material also changes dimensions due to stress and some materials tend to flow when subjected to sustained loads. These major causes of movement: thermal, moisture, deflection and creep, along with the proper way to control these movements are the focus of this presentation.

Other topics included in this presentation are --

• Workmanship: What to expect from the mason.

• Airspaces: Why is the airspace so important and what are the minimum requirements for proper performance.

• Colorless Coatings: When should they be used? Are they always effective?

• Flashing and Weepholes: Which types are most effective?

• Expansion Joints, Control Joints, Building Expansion Joints: Is there really a difference, or is it just semantics.

• Joint Spacing: Is there an appropriate ‘Rule of Thumb’ - or can such a rule lead to cracking?

• Compressible Fill: Where should it be used and why.

• Shelf Angle Details: What must occur at shelf angles to allow for the expected movements?

Questions/Comments?

Email: events@glengery.com

Our events are open to architectural, design, and building industry professionals only.

Protective Treatments for Masonry

Join us for an insightful presentation exploring the effects of water on masonry architecture and how to protect against it. This session will examine different types of masonry water repellents, comparing their effectiveness and application methods. The program concludes with guidance on treating masonry to protect against non-water-related threats such as oil and graffiti.

Learning Objectives:

• Understand six ways water penetration can damage masonry.

• Distinguish between the two main types of protective treatments.

• Learn how to research and select the appropriate treatments for your project.

• Review general application procedures for protective masonry treatments.

Questions/Comments?

Email: events@glengery.com

Our events are open to architectural, design, and building industry professionals only.

Join us for an exclusive Happy Hour featuring a tasting from Checkerspot Brewing at the Brickworks Baltimore Design Studio! Unwind with colleagues trying new beer, light bites, and great company in our stylish space. It’s the perfect chance to relax, network, and explore the latest design trends in a laid-back atmosphere. Don’t miss out on an evening of inspiration and connection!

Questions/Comments?

Email: events@glengery.com

Ready to strengthen your understanding of steel fabrication with the experts?

Join us on April 17 at Brickworks Design Studio for Steel Fabrication Essentials–a seminar with hands-on experience designed for you to connect and learn. Plus, earn 1.5 LUs!

If you're an architect, engineer, or part of the design community, this event is your chance to gain practical insights into fabrication processes, learn best practices for collaboration, and network with industry professionals.

Save your spot: aisc.org/phillyseminar

Lunch will be provided.

Our events are open to architectural, design, and building industry professionals only.

Enhancing Thin Masonry Veneer: Metal Support Systems

This session will examine the design and performance of metal backing systems that mechanically support thin masonry veneers. Join us to compare various systems and traditionally laid face brick masonry as well as review critical design and installation factors.

You'll also learn about performance tests that establish code compliance for proprietary thin veneer support systems and explore strategies for water penetration, structural performance, thermal efficiency, and National Fire Protection Association (NFPA) 285 approval.

Learning Objectives

1. Discover water management strategies for mechanically supported thin masonry veneer systems.
2. Analyze veneer support methods for mechanically supported thin veneer systems.
3. Explore requirements for supporting thin masonry veneer over continuous insulation.
4. Learn how thin masonry veneer systems comply with building codes

Questions/Comments?

Email: events@glengery.com

Lunch will be provided.

Our events are open to architectural, design, and building industry professionals only.

Enhancing Thin Masonry Veneer: Metal Support Systems

This session will examine the design and performance of metal backing systems that mechanically support thin masonry veneers. Join us to compare various systems and traditionally laid face brick masonry as well as review critical design and installation factors.

You'll also learn about performance tests that establish code compliance for proprietary thin veneer support systems and explore strategies for water penetration, structural performance, thermal efficiency, and National Fire Protection Association (NFPA) 285 approval.

Learning Objectives

1. Discover water management strategies for mechanically supported thin masonry veneer systems.
2. Analyze veneer support methods for mechanically supported thin veneer systems.
3. Explore requirements for supporting thin masonry veneer over continuous insulation.
4. Learn how thin masonry veneer systems comply with building codes

Questions/Comments?

Email: events@glengery.com

You're invited to join the WIA Committee for our annual International Women's Day Celebration! We always look forward to gathering with our community at this event, and this year we'll be empowering and activating our Auras of Action with Inner Light Aura (https://www.innerlightaura.com/) and our longtime friends and partners at Brickworks Studio.
International Women's Day and the (United States') Women's History Month signals global recognition celebrating the historical, cultural, and political achievements of women. The day invites everyone to envision what a world without gender inequity might look like, and to reflect on what action we can take against gender inequality around the world.

Thanks to our event sponsor and host, Brickworks Design Studio.

Register for Melanopic Lighting CEU with ELA + Synergy✨

 
Lunch will be served

Our events are open to architectural, design, and building industry professionals only.

DEX is a round table event where we connect unexpected people, places and ideas in a lively communal experience to talk about design.

Questions/Comments?

Email: events@glengery.com

Drinks and Appetizers will be provided.

Our events are open to architectural, design, and building industry professionals only.

Bricks and Bouquets: Celebrating Women’s History Month

Step into the inspiring world of Brickworks for a celebration of Women’s History Month like no other! Join us as we honor the creativity, strength, and impact of women through the art of bouquet-making, alongside a captivating showcase of our finest brick products. This unique event offers an opportunity to craft your own beautiful bouquet while connecting with like-minded professionals in a vibrant and welcoming atmosphere. Immerse yourself in an evening where creativity flourishes, stories are shared, and innovation is celebrated. Take home a handcrafted bouquet as a symbol of appreciation for the remarkable contributions of women past, present, and future. Don’t miss this perfect blend of artistry, networking, and empowerment at Brickworks!

Questions/Comments?

Email: events@glengery.com