Imperial Plum (SA17-5710) *NEW*

Compare up to 4 products at a time.

Select products to get started.

Imperial Plum (SA17-5710) *NEW*

Product Thickness Details:

The product is available as thin brick and can be manufactured to meet PCI physical property requirements* and withstand the 1,000 psi pressure. This product is typically cut to 3/4" thickness, but can be cut to 7/8" or thicker, which would include a ribbed back. It is available in the sizes listed below up to 12” lengths. Please contact the Hanley Plant directly at (814) 856-2171 for more information.

*Listed in the 3rd edition of the Architectural Precast Handbook

Product Information

  • Type:

    Facebrick, Thin Brick - Pre-Cast/Tilt-up
  • Color:

  • Style:

  • Plant:

  • Series/Collection:

    Engobe Series
  • Texture/Finish:


Special Order

  T H L  
Modular 3-5/8 2-1/4 7-5/8 in
Standard 3-5/8 2-1/4 8 in
Engineer Modular 3-5/8 2-3/4 7-5/8 in
Engineer Standard 3-5/8 2-3/4 8 in
Econo 3-5/8 3-5/8 7-5/8 in
Norman 3-5/8 2-1/4 11-5/8 in
Kingston 3-5/8 2-3/4 11-5/8 in
Utility 3-5/8 3-5/8 11-5/8 in
Double Utility 3-5/8 7-5/8 11-5/8 in
Unit Specifications Glen-Gery nominal four inch rolled edge extruded brick are manufactured to conform to the ASTM International Standard Specification C 216, Grade SW, Type FBS and all grades of ASTM International C 62.
Dimensional Tolerances Glen-Gery nominal four inch rolled edge brick are manufactured to achieve specific dimensional tolerances. The tolerances for various unit dimensions are typically: Thickness,  +/-1/8"; Height, 3" or less,  +/-3/32", 3" up to 4",  +/-1/8"; Length over 6" up to 8",  +/-1/4", 8" up to 12",  +/-5/16". Generally, the product ordered will contain a number of units which are under or over the specified dimension.
Finishes Glen-Gery rolled edge brick are available in wirecut, sand and smooth finishes. The availability of a particular finish is usually dependant on the product.