Compare up to 4 products at a time.
Select products to get started.
Black Pearl (WA11-9003)
Product Thickness Details:
The product is available as thin brick and can be manufactured to meet PCI physical property requirements* and withstand the 1,000 psi pressure. This product is typically cut to 3/4" thickness, but can be cut to 7/8" or thicker, which would include a ribbed back. It is available in the sizes listed below up to 12” lengths. Please contact the Hanley Plant directly at (814) 856-2171 for more information.
*Listed in the 3rd edition of the Architectural Precast Handbook
Type:Facebrick, Thin Brick - Pre-Cast/Tilt-up
Test Report: Black Pearl (WA11-9003) Test Report
Cleaning Document: Black Pearl (WA11-9003) Cleaning Document
|Unit Specifications||Glen-Gery nominal four inch rolled edge extruded brick are manufactured to conform to the ASTM International Standard Specification C 216, Grade SW, Type FBS and all grades of ASTM International C 62.|
|Dimensional Tolerances||Glen-Gery nominal four inch rolled edge brick are manufactured to achieve specific dimensional tolerances. The tolerances for various unit dimensions are typically: Thickness, +/-1/8"; Height, 3" or less, +/-3/32", 3" up to 4", +/-1/8"; Length over 6" up to 8", +/-1/4", 8" up to 12", +/-5/16". Generally, the product ordered will contain a number of units which are under or over the specified dimension.|
|Finishes||Glen-Gery rolled edge brick are available in wirecut, sand and smooth finishes. The availability of a particular finish is usually dependant on the product.|