Compare up to 4 products at a time.
Select products to get started.
Plum Ironspot (WIS62) Thin Brick 3/4"
Type:Thin Brick - Pre-Cast/Tilt-up
Style:Thin Brick - Precast/Tilt-Up
|Modular Thin Brick||3/4||2-1/4||7-5/8||in|
|Engineer Modular Thin Brick||3/4||2-3/4||7-5/8||in|
|Standard Thin Brick||3/4||2-1/4||8||in|
|Engineer Standard Thin Brick||3/4||2-3/4||8||in|
|Econo Thin Brick||3/4||3-5/8||7-5/8||in|
|Norman Thin Brick||3/4||2-1/4||11-5/8||in|
|Kingston Thin Brick||3/4||2-3/4||11-5/8||in|
|Utility Thin Brick||3/4||3-5/8||11-5/8||in|
Product Profile: Glen-Gery Thin Brick
Material Safety Data Sheet: Glen-Gery Thin Brick MSDS
Test Reports: View Hanley Report
|Thickness||3/4" thick (+/-1/8)
1" to 1-3/4" thickness available with ribbed back.
|Dimensional Tolerance Requirements||+/- 1/16" within the lot for 8" units and +/- 3/32 for 12" units
Ground edge available when required to ensure: plus 0", minus 1/16" for 8" units and plus 0", minus 3/2" for 12" units
|Special Shapes||Variation of Shape from Specified Angle: +/- 1 degree|
|24 hr Cold Water Absorption||Absorptions average below 6% as tested per ASTM C67|
|Efflorescence||Rated "not effloresced" as tested per ASTM C67|
|Out of Square||+/- 1/16" as measured as measured per ASTM C67|
|Warpage||Consistent plane of +/- 1/16" as measured per ATSM C67|
|Tensile Bond Strength||Bond strength >250 psi average for flat back units as tested per modified ASTM E488|
|Freeze-Thaw Resistance||Testing of flat back brick indicates bond strengths >250 psi average with no detectable deterioration (spalling, cracking, or chafing) after 300 cycles as tested per ASTM C666 Method B (modified)|
|Modulus of Rupture||MOR greater than 1,000 psi as tested per ASTM C67|
|Chemical Resistance||Rating of "not affected" as tested per ASTM C650|
|Surface Coloring||No observable difference in finish after 50 cycles as tested per ASTM C67|
|Black Surface Texture||3/4" back surface texture will be smooth.
Ribbed surface available with > 3/4" thickness